After mounting the door between the wall and the door frame, most often there are considerable slits, and the appearance of the walls located near the box are far from the ideal. To solve these problems and invented slopes on the doors. The name went, probably due to the fact that the adjacent small sections of the wall usually do at an angle - they miserably. Installation of door slopes with their own hands - the case is not the wiser in repair and construction, but the knowledge of technology and the sequence of actions will avoid errors.
Such a picture remains after installing the door
What do the slopes do
The classic finishing of the doorway is attached to its shockting. This method is relevant today. Slopes are trusted, it is difficult to damage them, a lot of trimming methods: paint, stick wallpaper, attach any other finishing material. Only high labor intensity can be attributed to the disadvantages. There is another point: it will be difficult to achieve an ideally smooth surface without the presence of skills, but it is possible to align with wallpaper.
Well plastered slough - it's beautiful and firmly
Quickly and without any problems, you can make the MDF panels. There are even special "g"-shaped profiles. Installing the slope in this case is reduced to the correct markup and imperceptible, but reliable fastening. Works are a bit more if you set slopes from laminated or veneered chipboard:
- Cut details of slopes are fixed to the wall. There are three ways: on the mounting foam and liquid nails, on a plaster solution or a collected frame.
- A foam is applied to the gaps between the wall and material on the special rules.
- Installed platband.
The finish from these materials is rather tough, has a very attractive appearance. Installation technology is simple and does not require practically no special knowledge and skills. The result is at least good.
Article on the topic: Everything about wall decoration by wood: panels, clapboard
Another simple, but the popular method is the covering of slopes with plasterboard. Even without having skills, installing door slopes with their own hands from this material allows you to achieve good results: all works are elementary. Only the effort is needed.
There is another inexpensive way to design slopes on the door - from plastic. If there is a skill of working with such material, you will not have any questions. The only minus of such a finish: Low strength.
So the options for the design of the doorway turns out a lot. Usually choose the one that best suits the design of the entire room.
Sucks to the entrance door
Of all the above-listed materials for finishing the slopes of the input door, it is possible to recommend only shuttering and finishing of MDF or laminated chipboard. These materials have a sufficient margin of strength to withstand multiple strikes, simply inevitable at the entrance.
Installation of door slopes from MDF or laminated chipboard is not relieved, and the result is wonderful
If we talk about finishing the entrance door outside, then the option is essentially one - only sealing the slopes from the plaster. Another thing is that it can be consolidated by ceramic tiles, a finishing stone, other similar materials. The sequence of actions in this case is as follows:
- Slopes are prepared: tenting and protruding parts, spots and dust are removed.
- The surface is ground.
- Lighthouses are installed.
- The primary layer of plaster is applied and aligned.
- After grappling the solution, the slope is placed the second time - it is completely. If the finishing is planned to use a finishing stone or tile, they are installed at this stage to the appropriate glue.
Outdoor slope input door can be separated by stone or tiles
Read more about how to launch slopes with your own hands, read here .
Internal slopes on the entrance door can also be from MDF and LDSP. They can be installed on foam and liquid nails, and you can use guide strips. Installation of door slopes from MDF is described in detail in the article "We are taking off on the doors from MDF, laminated chipboard, laminate. The remaining materials for the entrance door are better not to use: they are fragile, brittle.
Suns for interroom doors
For the design of the door slips between the rooms you can use any material. It is desirable only all the openings going to one room to be made equally, or very close in style.
In the residential rooms, the slopes of MDF looks good, especially if the finish is chosen into the tone of the doorway and are present in the interior. Plaster slings, painted or wallpapers are also popular. Classic - it is always relevant.
If one room comes out several doors, they are issued equally
In the bathroom or in the kitchen, you can break up a ceramic tile laid on the walls. Then the finish technology is similar to those described above, only at the last stage glue the tile on the corresponding glue.
If the room is decorated with plastic panels, or the doors are supplied with metal-plastic, the doorway can also be issued by this material. Installation of door slopes from plastic begins, as usual from the preparation: everything that can fall off is removed, dust is considered. Next, the procedure is simple:
- A starting profile is installed for the jacock around the perimeter of the door frame.
- Dowels are screwed at the adjacent wall at a certain distance.
- In the starting profile a special "G" -ny-shaped slope from plastic is inserted.
- It is pressed against the wall, because of what dowels come to special grooves.
If the room was separated by plasterboard, then it is logical to place the doors with the same material. You can do this in several ways. Quickly and easily - glue on the mounting foam. This method is suitable only if the slopes are more or less smooth. For the slopes curves, it will be necessary to collect the framework, and it is fixed to it with screws of plasterboard. Read more here.
Article on the topic: Treplex doors and their features: with photos Examples