In the performance of work related to repairs in a residential or office space, it is possible to non-accurate use of a mounting foam, its late use or a random ingress of the substance on various surfaces, including on linoleum, which is staminated by the floor.
Remove foam can be removed only with the help of specially created compositions. Non-compliance with the rules for the use of cleaners leads to a spurious coating, so all manipulations must be carried out in strict accordance with the instructions attached to the media.
Variety of works and ways to protect surfaces
Foam is very sticky and fade sticks to the surfaces
The use of mounting foam in modern construction is very popular due to the set of positive qualities of this material.
The need to create a moisture or airtight layer, fill the slots or cracks causes the masters to resort to the use of a mounting foam, which perfectly copes with the task when:
- Close up of seams and joints;
- filling out voids;
- creating thermal insulation;
- Use as sealant.
There are situations when the foaming composition is used to glue various materials. Due to the popularity of foam made for installation work, it is widely used and professional builders, and those who do repair independently, not referring to specialists.
There are certain rules that need to be observed when working. They will help to avoid emergence of unforeseen situations and make up the composition of various surfaces.
Refusal to comply with approved instructions leads to damage.
Freshly sprayed foam need to be removed as quickly as a rubber spatula
Adhesion decreases, and the low clutch level with other materials allows you to quickly and just get rid of the stains.
Rubber spatula will help carefully and carefully. You can use the wooden tool, it is necessary to use metal devices that easily damage the surface by violating its integrity.
In addition, it is impossible to increase the size of the spot, it means that all movements should be directed from its edge to the center. As if collecting it, we will have to try to give a stain with a minimum size and transfer the substance to the second spatula.
Article on the topic: Vertical Blinds: Features and Benefits
The rubber instrument is used as a scraper, and a wooden playive the role of a kind of shovel or a scoop, which tolerate foam from the floor surface.
Quickly collect composition is not enough. Traces remain on the linoleum, which must be immediately removed, so that there are no traces or muddy divorces on the light of sun rays on the finishing decorative layer. Removing the whole composition, you need to wipe the damaged section of the coating with a special means, then apply wax or oil from flax on it.
Ideally, to remove a spot, you need to use a special solvent created to get rid of the non-frozen installation.
Among such compositions are especially popularity:
- Penosil;
- Foam Cleaner;
- OPPA;
- Ultimaprofessional.
The use of these funds as the compositions for removing a soft entreprenent mounting foam is quite justified. They are affordable, safe and effective.
Removal of frozen foam
In cases where it did not turn out to be a predetermined solvent to get rid of the stains of the mounting foam immediately after their appearance.
It is necessary to give the composition to completely frozen and only after complete rejection to start working to remove foam from linoleum.
Cut the protruding part
First of all, it is necessary very careful, trying not to damage the floor covering, cut dry foam, using a sharp kitchen or stationery knife. Cut is necessary so that a small amount
Your foam remained on the floor, so you can protect the coating from damage.
A cleaner is applied to the remnants of the substance using a tampon. Work is better in gloves to protect the skin of the hands from the ingress of the aggressive substance and the appearance of irritation.
Most of the solvents created to remove the mounting foam from the floor surface are caused by its damage.
If it is not possible to preserve the attractiveness of the coating, it is better to abandon the application of a chemical composition on a stain. For details on how to remove the frozen foam, see this video:
Article on the topic: Harmoshka interior doors from Lerua Merlen
Dimekside will also help in the fight against foam
The easiest and most affordable way to remove the mounting foam from the linoleum is ordinary water. Highly moistened rags are put on the residue of the composition after the main layer was cut.
After some time, the foam will begin to fall behind the linoleum and get rid of it will be possible with a damp cloth and dry napkins. This method will allow to preserve the upper layer of flooring in the integrity and will not let him lose aesthetic appeal.