Little to build a good barn for chickens, you need to equip it: fasten the pesals, make nests, put / hang drinkers, feeders. But it is necessary to do it so that you can comfortably serve the party. In reality, the keris do not care how beautiful they have nests. They will fit perfectly on the floor. You are inconvenient to collect eggs from the floor, and they can laugh. Therefore, the arrangement of the chicken coop is made so that it is more convenient for you.
Pazeste
First of all, equip the chicken coop inside the piping. It is a round or oval stick - a tree branch, a stalk from the shovel, outcast bar, etc., fixed on some height above the floor.
On average, they take about 20-25 cm of the length of the petition of one chicken. From the walls of them are fixed at a distance of 25-30 cm, one inese from the other - at a distance of 35-40 cm. You can make multi-tiered, but there will be fights for the highest place. Keep in mind that all sizes are only approximate and necessary in order to be able to navigate. Everything is selected more at the place: and the breed is different and smokeshief, and their owners too.
Arrangement of the chicken coop inside: recommended dimensions
To make it easier to remove, at a distance of 20 cm below the church, a shield from any smooth material is installed. It accumulates litter, because choose a smooth surface: it will be easier to fit.
Smoke planning
The question remains: what is the height of doing, and therefore the shield? Consider the most convenient in the trolley. She must travel under the shield so that you can drop the litter in the wheel in a wheelbarrow. Flood The height of the shield determines the height of your car, and the shield will already be the straps of the sease. And again the height of the petition for the cleaners choose so that it was comfortable to clean up.
Nests
The second mandatory element in the arrangement of the smokehouse - nests. They will be rushed on the floor, but the eggs will be dirty, and they can also laugh. According to the standards one socket is made on three chicken. And in fact it turns out that how many they do not, they choose one or two, the maximum - three and stand in them in them. The rest are exactly the same near empty. Periodically, their tastes change, ride begin to others ... From all this, it should be safely considered 5-6 goals to one nest, all the same half will be empty.
Place the nests are better so that you can comfortably pick up eggs, i.e. Hang on the wall. So that the bird can calmly get there, trapki - an inclined board with a barbed across the strands / chopsticks. The same traps are made to the petitions. If the nests are accommodated close to the petitions and on the same level, they will go back there. It is quite convenient.
You can make such civil sockets
If there is an opportunity, make sure that the nests in the opposite side go to the corridor if it is. On the back of the door make the door. Then to pick up eggs do not need to go to the pen - opened the doors, collected.
Nests with doors in the back
More chickens love to ride in the dark, or at least in the lack of light. Therefore, the entrance is made small, but in order not to sit for a long time inside, they slept and did not go, the roof is made with a strong slope (in the photo).
Article on the topic: Design of one-room apartment for a family with two children
You can simply place or hang along the walls of the box, but to organize the blackout, putting the partition before the nests. In general, it is difficult to predict their behavior. It happens just the nests ignore, carry where it fell. Then the stencil or layout can help: cut the egg out of white paper and put in the nest. Can help: become there sore.
Several nests in different designs in the photo below. These are all real chickenurs, you can take into service.
Chose one nest on each tier
This is the arrangement of a new chicken coop
Plastic is very practical: it is convenient to wash, it is inexpensive, you can make a lot of things
Such plastic nests of the chickens were very loved. Put in them more hay - rushing
The place at the bottom can be taken under the petrolers or hang on the bottom of the IR lamp - to make a solarium
In the nest, you always have hands with caution: you never know what the chickens were demolished ... much more convenient and safer when the eggs roll into a special compartment - the egg-ray. The main snag in this device: pick up the angle of the floor and flexible material so that the egg would move it, and stopped, without swaying to the wall. To mitigate the "landing", the bottoms are poured.
The design of the jack with a nuclear
Since eggs roll and the bird does not see their bird, they may refuse to take in such nests. In this case, it is possible to make the eggs of the eggs - from a thick foam in full size or out of paper cut stencils - and glue it to the bottom. It works almost always.
How to make a warm chicken coop here.
Cells for Kur.
Sometimes the bird is kept in cells. But this is under industrial or semi-industrial content. With this method of cultivation on a small area dwells a large number of birds. The drawing of cells for chickens is located below.
Cage Drawing for Broilers Size
All sizes - according to standards, and do not think anything. This is a minimum that is needed by nurses. And what can happen from such cells in the photo below.
Cells for non-success
How to make cells for broilers from wood. See in the video. Everything is painted in very detailed: what, for which, what sizes, how to collect and what is needed for this. Really useful.
Drinking coarse fools
The arrangement of the chicken coop is unthinkable without drinking and feeders. Moreover, in the summer walking, they should also be. Feeders are periodic and bunker. Periodic - this is when you came, poured the norm of feed and that's it. Before the next feeding, they cost empty.
Climb and dig - Favorite business
Bunker is when there is a decent food supply, which is constantly being added to some container. Both have disadvantages: at periodic - every time you need to go to the chicken coop and pour the grain, and another bird crowbles, beats for the best place, which sometimes leads to the fact that the feeder turns over.
If there is a bunker feeder, you need to go much less often, but there is an opportunity to overgrow the bird that for non-bulls - trouble. Therefore, or nurses make a large walk or feed only broilers.
Article on the topic: Replacing cold glazing to warmly with their own hands (photo and video)
The designs of periodic feeders are mass, but not all of them allow economically to spend food. The easiest way to pour food to a basin or container. But, if there is at least some possibility, the chickens begin to rake the feed, pouring it out and then they hide. You have to throw away. And such feeders allow you to not just dig in the stern, but also to climb into the feeder with your feet. Therefore, they must be improved. To do this, the wire separators are installed on the container. Food consumption sharply decreases: it is harder to burn.
Feeder with separators
You can do, for example, a similar feeder (or cream), which is conveniently attached or becomes at the wall. It is probably easier to cook from the metal, although there are craftsmen who will make something similar from the tree.
Comfortable feeder for chickens: and places a little and stands firmly, and you can hang
There are some interesting ideas. For example, from an old disk for the machine, a basin of a suitable diameter and a plastic bottle for water capacity of 5-10 liters is assembled by an economical auto-feeder.
Components for homemade feeders with economical feed
Disk are looking for this type as in the photo: with a large number of small holes on the outer edge. In his middle, cut the hole in the size of the neck at the bottle. In the cover of the bottle, cut out the bottom, leaving only the ring with a thread. In the bottle, the fodder mixture is covered, the disk is put on it, pressed it with a cropped lid. The pelvis is poured, the design is installed on top.
Enjoys success))
In order not to disassemble the feeder every time when it is necessary to pour into the bottle of feed, it is possible to cut the bottom, making it like a lid like it. Then the bottle itself can be fixed more seriously: fixation by carving from the lid is not very reliable. But such an improvement does not allow to rummage in the stern, and no one climbs into the pelvis.
You can make a feeder from a piece of plastic sewer pipe. From both sides, the holes are cut out with a diameter of about 7 cm. They are not at all necessary to do round - square or rectangular will also go. On the ends, a corner is installed at 90 ° field up and on a small piece of pipe: you can fall asleep here.
The feeder for the chicken coop of plastic pipe. Suitable as a drink
Second version of chicken drinker-feeder from PVC pipe
Simple, but the spacious bunker feeder is a decent stall in which the folding plank is attached at the bottom. In the open position, the feed is poured onto it.
Another embodiment of the economical feeder is made of plastic sewer pipes. But this is a bunker design: a decent stock. The design is simple, and the consumption is reduced.
An even more interesting design of the chicken feeder in video: with a lid. To open it, you need to jump on it.
Another option of the bunker feeder from PVC pipes and a plastic bottle of water.
How to make beautiful beds read here.
Homemade drinkers for chickens
With drinkings almost the same story. Only here water splashes, which in the mixture with litter gives an extremely resistant smell, as well as dirt. All this does not contribute to easier and quick cleaning. Therefore, the selection of drinkers is no less important than feeders.
Article on the topic: Adjusting aluminum windows with their own hands
The easiest option for a small number of birds is up to 15 pieces - siphon drinkers. They are on the legs, allow economically to spend water. If the legs are designed successfully, even the chicken flush to the top does not overturn them.
Syponic drinkers - factory and self-made plastic bottle
The factory drivers, of course, look more attractive, but the homemade version is almost a gift, but they work at no worse. In the photo you see a simple siphon homemade cream for chickens: In the corner, I knocked the support - a piece of the board with a cut-cut hole under the neck. From above - the system of fasteners, and the load so as not to be shot down. In the former bottom of the bottle carved the hole in which the water is poured. The whole focus here is to choose the distance on which to install water tank: so that it is not enough or too much.
Cuppeakers are comfortable when growing in cells, as they are conveniently fixed to the grid. But no one bothers to hang a piece of grid, say on the wall or come up with another mount.
Cuppeakers for poultry (chickens including)
They allow you to drink birds without splashes. Water is served in a cup, it leaked under the action of gravity, overlapping the feed. Water drank, the cup raised, the water arrives again. The hose is connected to the side fittings, the second end of which is located in water tank, which should be higher than the level of cream. Convenient and economical.
Installation options for cupid cream
Nipple drinkers for chickens. These are small devices, several centimeters in size. In the plastic case inserted a tape of a cone-shaped form from a stainless steel.
Nipple drinkers
These nipples are screwed into plastic pipes in which water is served. The hole of the desired diameter is drilled, the thread is cut and the nipple is screwed. When you press the rod, a few drops of water appear. Chickens peel the rod, drinking the drops that appeared. The main disadvantage of this method is drops that fall to the floor. So that this was not under each drinker put a special drone. It just snaps down on the pipe.
With all his miniature, these small drinking rooms are much, especially if high-quality - read - imported. Ours, of course, cheaper, but break faster.
Little drinking bowl for chickens or quail
And the rest are different cups and basins, which simply poured water. Their disadvantage is that the birds often turn them away, and the water in them is quickly dirty.
There are still interesting ideas from self-tech. For example, such a drinking bowl of the pipe is presented in the photo. In a piece of plastic pipe, the water level is controlled by a float mechanism from a toilet bowl. Three cup dressing workers are adopted to pipes.
Three cups are traditional to the pipe
A drivingker with autofill is demonstrated in the video.
If there is a desire to equip the chicken coop, so as to minimize the need for its service. In this case, the bird will bring not only the income, and the pleasure: it is always nice to look at the objects made with your own hands, and in the chicken coop without "direct" hands to contain a bird and expensive.