The store is very difficult to decide on the choice of LED lamp, everything seems to be different with each other, the difference is only in power and in the type of flasks. But, here, there is a feature here, because you can pick up such a flask, with which you can increase the brightness of the LED lamp. How it would not sound, but without much effort you can make that your LED will shine much brighter. However, there are many features, they should be taken into account.
How to increase the brightness of the LED lamp at home
First, if you have diodes in corn - nothing will work with it. It shines 360 degrees and diodes are placed around the perimeter. Plus, they often not protected, in no case cannot be touched against them with bare hands, they will immediately blown up. Immediately it is worth noting that for Chinese LED lamps such a method is used most often.But, we will talk now only about those LED, the power of which can be increased.
You can allocate three types of flasks:
- Matte from plastic.
- Transparent plastic.
- Glass, transparent or matte.
LED brightness disadvantages
The flask always acts as protection for the eyes. If it can be removed the result may be deplorable. It is not recommended to do this if you have children, their eyes will be immediately susceptible to serious load, and sooner or later the eyesight worsen.
Of course, you decide to increase the brightness of the LED lamp or not. But, we recommend, if the room is residential - not to do this. This also applies to offices.
When you can increase the power LED
In the following cases, you can easily remove the flask. But, turn your attention, moisture should not fall on the lamp in this case. Also read: Jazzway and Philips lamps comparison.- Lamps that are installed in the entrance. You can safely add brightness, especially when using Chinese lamps.
- In closed plates, which are covered with matte color.
- In the open slap, only in this case the light should be directed upwards.
- In chandeliers, luminous vertically.
Please note if you install a lamp in a matte plaffone - you lose 40% of brightness, it is better to shoot it.
Outcome
As an example, we took the Philips lamp and removed the protective flask from it, here we turned out these results:
- With the flask - 500 lumens.
- Without flasks - 689 lumens.
Article on the topic: Laying of the parquet board: how to put it yourself, technology and video, how to put a parquet for glue, the installation is correct
As you can see, the result is neither the face, power increased by 27%. If such a lamp is installed in a non-residential room - this is an excellent solution.
Tip, you can buy a cheap lamp and remove the flask from it, so you get a good brightness at low cost.