The external attractiveness and functional belonging of the installed block of opening of the opening at times is amplified if used telescopic platbands on the door. It is from the quality of installation that the level of optimal comfort indoors depends. And how to choose them correctly, the installation process and some nuances, everything is laid below in the article.
Criteria selection criteria
Putnocks on the door carry a number of essential functions that enhance the quality use of interior or entrance doors.
Putcasses give the aesthetics and comfort of the room
That is why the installation of platbands is in fact the most important final stage of the extraction of the doorway. And it is no secret that the quality of the finished work has been able to guarantee an attractive result. Therefore, it is necessary to penetrate some of the recommendations below, thanks to which cash on the door will take place at the time, and the installation of goodholds will become another fascinating entertainment.
If the difficulties in the selection of door floors of the internal purpose, thanks to the recommendations, passed with a bang, the installation of interroom doors could slightly sweep the nerves, both home master and households. However, the installation of platbands, the more telescopic, does not seem to be a difficult task that it was impossible to perform with their own hands.
Telescopic Moldroom Design and Docking Example
For the work of the process of installation of telescopic handling products, it is worth buying platbands on the door. The design of the adjacent rooms should correspond to the design not only the door design, but also the interior finish itself. Of course, platbands on the doors are chosen relative to individual preferences of interior design, but we recommend to look at some tips that can facilitate the selection process, which are presented below.
Common size of decorative planks
Harmonious Decor of Quality Installation
The first and main task of cashing to create an attractive decorative design of the doorway. The decor in any form of use should not be knocked out of the general visual sizes in the room. In other words, platbands, like kind, should look natural on the wall plane relative to the dimensions of the door sash, the very opening and adjacent plinths.
Agree, after all, a little ridiculous door will look at the door of small sizes in the opening, which is often installed in the openings leading to the kitchen, the bathroom or shower, in the frame of a wide convex platband profile.
In addition, there are GOST standards governing the correct selection of the width of the door cash. The desired width parameters are often not just not easy, if we take into account that the platbands are standard in height, and can be typical.
Setup equipment of telescopic molding
A fully organic look will have door platbands in medium width of 7 and up to 10 cm. This size of the cash on the door will focus on the very door of the outlet overlap.
Organic use of wide cash
We agree that in some design solutions, when interior with interior situations, wide platforms on the door, look quite well and even appropriate.
Article on the topic: What walls are suitable under orange kitchen
Nevertheless, in the standard setting of the room, a large width of the ticket looks rude and weights the opening. In addition, a part of the useful area on the surface of the wall, which will occupy wide handling products, is extremely important in decorating small-scale apartments.
With all this, we do not recommend rush to extremes and minimize the width of the framing platband. For example, cash on the door, the width of which is less than 5 cm, it looks caricature.
In addition, with all the desire, it will not be lucky to use such narrow products. And all because the width of the box of the box itself can reach up to 3-5 cm, the regulated mounting distance from the louting to the wall surface should be at least 3 cm, plus it remains the edge of the wall decoration.
Therefore, overlapping the technological gap and make the framing the passage is beautiful, using a 4 cm wide platband, will not work in any way.
Example of using narrow platbands
The exception to the use of narrow platforms may concern the situation when furniture is close to the work, or the passage next to the perpendicular wall. It is worth buying a swing of smaller width so that he does not rest in the next barrier.
Selection of manufacturing material
The material used in the manufacture of a telescopic platband may affect the visual perception of the door structure as a whole. In the assortment sentence presented on the shelves of construction and specialized stores, it is permissible to see the handling goods made from such raw materials:
- metal (more often aluminum);
- natural wood;
- MDF, fiberboard and other derivatives of wood processing;
- plastic;
- Even pressed paper.
Platbands from different types of material
Decorative strips, as well as good, interior doors must be combined with the type of material and finishing the door canvase and even the box. Right buy trims from the same material and finishing, which were used in the production of door floors, in particular the sash itself. The view of the passage will not only be organic, but also reliable in operation, since different types of raw materials may not be combined not only due to visual accessories.
For example, a telescopic coating of aluminum when landing it in the grooves of a wooden luttika, with time it can start falling out, since wood, like its derivatives, are endowed with the property, adjust to the microclimate of the room, expanding or vice versa.
Profile form and color
Regarding the shape of the chosen telescopic platband, it is necessary to rely on individual taste preferences, while relying on the stylistic interior design of the room or the entire structure as a whole.
Commodified profiles of M-shaped platbands
After all, when framing a deaf sash made from polyvinyl chloride in the style of high-tech, use platbands with carved vensels of the hands of the architecture masters, at least not logical. Flat decorative slats, harmonizing with the basic color of the canvas, will be appropriate here.
The form of delets, if we consider this question from the point of view of the functional composite for overlapping technological gaps, can play a decisive role. At the same time, the color affects the visual perception of the accurate accent.
Article on the topic: Making a massage rug for children with their own hands
The result of the overall perception of the door itself is precisely precisely from the color of the jogbook.
The color tones of telescopic or simple plates to the door design of the adjacent premises are selected from the following conclusions:
- in the tone of the door sash;
- under the color of the adjacent plinth;
- in the color of the wall decoration;
- Absolutely contrasting color.
Harmonious door framing
All the recommendations under consideration regarding the correct selection of platbands under the door items should be compared if there was a need to buy dobor for doors. Dobors on interior doors should be completely harmonized with acquired platbands, that is, to be almost one entire waters of the wall opening.
Prepare the working area
Before starting the installation of volunteers and telescopic platforms on the openings, it is recommended to prepare for work.
Building a box for installation
This process is needed, first of all, a home master who takes everything to do everything. And the structure itself, in order for it later shone visually perfect decoration. Conditionally, the list of preparatory actions can be divided into several logical stages that do not miss:
- Installation of the door box. It is worth noting that the installation of the door box is an important component in the installation work of the door structure as a whole. It is the box that will carry a lot of permanently active sash. And since the telescopic platbands are carried, first of all, the decorative functional load (to hide the installation and wall defects), then the installation must be carried out with their own hands after installation work.
- Cleaning the filling material (mounting foam).
Sleep of surplus mounting foam
Foam need time for complete drying and fixing (about a day with large quantities). After drying, the reinforcements need to be carefully cut off around the perimeter with an acute construction or stationery knife. The foam cut level must match the louting and the wall.
- Increase the strength of the opening. Increase the strength of the opening is permissible with the help of plaster used for grouting the foam surface. It makes the box and the wall into one. In addition, during the installation work on the installation of the box, some unevenness of the wall of the wall can occur: concrete chips, other gaps.
- Finishing works of the wall surface.
Wall Defects After Mounting Door Control
As previously noted, the planks must framed the door in a decorative plan, which means the complete installation of the door design. The same applies to the finishing works of the walls. Steel products cover the jack between the wall and the louting. It is recommended to finish all the painting works of the walls, shove wallpaper and so on before planning telescopic platbands.
- Cutting works. The final stage of the preparatory work on the installation of the framing implies cleaning the installation surface. With the plane of the adjoining wall and block you need to remove dust precipitation and other trash. If during installation it will be used when boarding a telescopic platband in the grooves grooves, the surface is desirable to further degrease the entire perimeter.
Installing Dogs and Telescopic Put
The installation of telescopic platbands is done in the technological plan, it is even easier than simple to assemble the overhead type.
Installing telescopic concubines
Under the shelf of the telescopic molding in good and special boxes there are grooves. Our task is to plant a comb cover in this groove, but first to fit it under the size of the opening. If you split the process to specific steps, it looks like this:
- Conditions and dough trim.
- Installation of a good rail and telescopic platbands.
The fitting of the telescopic platband is carried out by measurements and trimming. In fact, there are two options for the corner of the molding products:
- under 45 ° is a classic version of the docking of platbands;
- Under 90 ° - is considered to be a modern docking.
Options of the corner of Spil
Nevertheless, it was repaid in 90 ° according to the masters is considered an unfinished type of installation. That is a pretty primitive way of installation. But, if personally, your preferences converge in this form fitting the framing, then you can do so. Especially the installation with your own products in 90 ° is somewhat easier: it is easier to make measurements and installation. It is unlikely to be mistaken here.
It is worth noting that if the telescopic platband of the decorative configuration of the section (semicircular or other not flat shape), when installing with a marking of 90 °, it is extremely attractive looks in the frame.
In general, we consider the installation of the installation of telescopic platbands with a stamping of 45 °. If there is no possibility to use expensive equipment for a drink, then it will be suitable:
- Simple hacksaw with small teeth;
- markup pencil;
- Stuslo for fixing and accurate dug.
In a vertical position, we lean the hand to the slope, we make a cutting mark at the level of the upper ticket width. We put in the stub and remove the remainder of the length of 45 degrees.
Trimming a mold when using stusl
Ready vertical decorative bar must be inserted into the grooves, but not pressing - it is still a rough version of the installation in order to measure the upper part. By vertical boards, measure the horizontal framing. In the same way insert in the stub and make cuts at 45 °. DOWERS, if there is a need for them, in size is adjusted by simply measurement of the internal height of the opening.
In fact, it is all, but it is worth knowing that the final installation of casters in the grooves should be done, starting from the horizontal decor, and then the vertical becomes in place. The shelf of the product, both in the grooves, and in the louting, is often quite tight. If when it seemed it turned out that it is not so that it is possible to strengthen the design additionally using glue ("liquid nails"). Just wrap the shelter with glue and put in place, after a few hours the block will become monumental. Just need to remember that in this case, the framing will become non-removable.
The supernatural is nothing in the installation of telescopic platbands with their own hands. It is recommended to just be neat and attentive to not break the randomly M-shaped part of the jogbook, which is mounted in the groove of the response.
(Your voice will be the first)
Loading…
Article on the topic: Why does the drum be spinning in a washing machine and what to do?