To date, the choice in modern furniture stores is large, so it is not difficult to acquire anything. But this does not mean that the furniture made by their own hands has become quite irrelevant. For example, who interferes make a stool with their own hands, and even such, from which the eye will not tear off? At the same time, absolutely no need to enjoy special skills - just just follow the instructions and everything will definitely.
Folding stool drawing.
So how to make a beautiful and durable stool with your own hands, what will you need for this? First of all, you need to purchase the appropriate tools:
- Mill, which is adapted for handmade.
- Lobzik (better to take electric) with a necessary set of pylons, such to be clean cuts.
- A screwdriver that has enough power, then there will be no need to use a drill.
- Machine intended for grinding.
- Pencil.
- Roulette.
- Building angle (straight).
What materials do you need and fittings?
Tools for making stools.
The easiest way to buy a furniture shield (just wonderful if it is made of beech), the size of such a shield should be 1120 * 400 * 24 mm. From such a beech shield, you can easily cut the necessary parts. It should be noted that such a thickness for all parts is quite acceptable. To make a folding stool with your own hands, you will need fasteners:
- Butterfly-loop with a scope of 35x35 mm, they will be needed in the amount of 4 pieces.
- Do not do without a hairpin 8x250 mm, the mutual cutting of the thread is required, the end nuts will also need.
- We will need 8x50 mm.
- Folding stool can not be made without high quality joinery glue, can be used PVA emulsion.
- In order for the product to be not only durable, but also beautiful, it is recommended to use a toning varnish. The beech wood covered with such a varnish looks especially attractive.
Article on the topic: Plastic Plinth for Bath - Mounting Secrets
How should the details of the folding stool?
From the beech shield, it is necessary to cut the circle in the most careful way (it should be perfect shape). The diameter of such a circle should be 350 mm, if a person has a solid hand, then cut it will not be much labor. But the folding stool is mandatory must be equipped with a handle. To make it, you need to use the perovy drill. Best of all suitable drill having a diameter of 22 mm. In the future, the seat must be drilled a pair of holes, but it is necessary to do it so that the distance from the edge of the external distance is the same. Between the centers, the distance should be about 120 mm. To get a comfortable handle, you need to connect everything with propils.
Folding chair assembly scheme.
As for the processing cutter, it is possible to take the most common, end, in the form of a semicircle, and it is her the details on both sides. Details of the legs on the inside to handle the cutter is completely optional.
To cut through the groove in the inner frame of the legs, it is recommended to use a straight mill of 8.5 mm, however, there are 2 options for the supply of such a groove:
- You can make holes for the entire length of the groove, then just knock the jumpers using a thin chisel.
- Make 2 end holes, after which the "channel" is neatly digested between them with a jigsaw. But then you need to be ready for what you need to purchase a special pink, which is designed for longitudinal cut.
As for the niza legs, they are simply recommended to be rounded, and then put jumpers between the legs, it is done on the wrappers with glue. Surfaces that are tightly adjacent should be missed by glue, it is also necessary to drop glue to the holes for the waders. Then you need to pull the legs with clamps and leave them until they are completely dry, the remaining glue must be carefully removed.
Article on the topic: Tile laying options - Methods and recommendations
How is such a stool going?
Such a stool should be collected with strict counting of sizes, then there will be no problems with such a design. The loops must be screwed to the screw of 3.5x16 mm.
In order for such a furniture product to be made independently, it was an attractive, pleasant texture and a saturated color, a certain effort should be attached.
All available parts must be watched several times, and then dried, so the texture of the tree "rises".
After that, we need to process emery paper, at least 2 times to cover everything with toning varnish, after which such a stool becomes not only a useful and comfortable thing, but also perfectly decorate the interior of the house.
As can be seen, nothing particularly difficult in such work is not necessary, you do not need large financial and temporary costs - and the stool will be ready with your own hands.