The most popular with the consumer continues to use soft varieties of lambrequins, as in order to create an atmosphere of the holiday, it is impossible to find a more optimal designer element. Especially if you perform jewelry for lambrequin with your own hands.
An example of the pattern of a classic curtain with lambrene.
Device and features
Any lambrene is, first of all, Swag. In their form, this detail resembles a sink. From both sides, a folding folding is made, which gives its lower part of the form of the semicircle. In order to additionally decorate and diversify the product, the form can be made not standard, but asymmetric, thereby attaching a special personality.The second part of the lambrequin is halfwall. This is an ordinary Swag, at the top of which a special hole is performed.
Next follows jabot. One of the most essential parts. It is a fold, which is laid through the top slice of the fabric. The fact that the sides are made of different sizes, allows you to transfer a special game of light on the ground.
Tie - In this detail, the folds are layered around the perimeter of the upper cut, representing several jabs that are connected by long parts of the part.
Plank, with which the lambrene is attached to the eaves.
How is the cutting lambrequin? To start opening, you need to decide on the choice of fabric. To fulfill the lambrequin, it is better to stop your choice on soft tissues of one tonality or choose a material with a careless pattern.
How to sew a lambrene
Detail of the Swag reminds of its appearance to the trapezoid with a slightly rounded edges.
Material calculation scheme for lambrequin "Fan".
- In order to proceed to the pattern, the fabric is cut at an angle of 45 degrees. This is necessary so that the folds look as soft as possible.
- This part consumes the largest amount of material, regardless of the direct size of the Swag.
- After it is completely uncalled, it must be carefully stroke before and after processing the lower cut.
- In the event that you cannot qualitatively accomplish the folding of the folds when ironing, slightly stretch the fabric and shook the lower edge parallel.
- In order to outline the borders of the future stead, it is necessary to accumulate a pencil line and mark all the sizes in it in the finished form.
- Next, the stag is collected in the right places by pins in such a way that the center remains untouched. After that, it is necessary to proceed to direct work on the folds.
- The svag is then folded on the table and additionally marks the line of the future seam.
Article on the topic: GlKl partitions: Classification and installation
Do not get upset if the folds do not work the first time perfect. Purchase several meters of cheapest fabric itself and pre-work on it.
Decoration of lambrequen
The choice of lambrequin completely depends on the appearance of the room. Lambonen is aimed at creating the maximum completed window opening form, helping to hide the unprepacent appearance of the cornice.
In order to choose the optimal option of the lambrene to the room, it is best to see photos of finished works.
Extra popularity acquires tough varieties of lambrequins, called the Bando and allowing combining various types of fabrics, thereby creating a natural decoration of lambrequins.
In the same case, if you plan to create jewelry for lambrequin yourself, you can create decorative cords, individual applications, soft brushes, butterflies, animals and flowers made of tissue pieces.
Types of Lambrekenov - Bando.
Brushes. You can decorate the lambrene with your own forces, transferred to it an individual designer idea. Graceful brushes will be very attractive to look at the lambrene.
Of course, you can buy a ready-made decorative product in the store, but the price of such things will be several times higher. In addition, self-made brushes will attract attention to the individuality of the style.
To work, you will need a very significant amount of diverse yarn and fine synthetic cord. In antiquity made brushes decorated with precious stones, now anyone can decorate lambrequins from beads and beads.
When creating a brush, you can use an unlimited number of colors, picking up the thread to the color of the curtain or making a more contrasting selection.
Now the decoration of lambrequins continues to gain increasing popularity. If necessary, decorative elements can be selected even to such a complex style, like high-tech, creating an original and unique composition.
The width of the brush is selected in each case individually, helping to create an additional comfort indoors.
- A rectangle is cut from the cardboard to the size of a future brush.
- A thick yarn is wound on it, which must then be tightly tied up. Consider that with such work, the end of the thread must hiss along the turns that will be cut down at the bottom.
- To perform the suspension among themselves, thin cords are woven. A ring of wood will need to wrap the yarn, and the ball is sewn.
- Each subsequent end of the thread needs to be hidden under the previous twist, traveled it through the ball and ring. Now after the wooden part moves to the ball, the brush will be completely ready.
Article on the topic: Curtains selection ideas on triangular windows
Flowers and their use as decoration
The easiest way to create jewelry for lambrequin is to decorate with flowers from the fabric. All that will need this is a small amount of lightweight material. The optimal option for performing this work will be a veil.
It is necessary to carve the bands, the width of which will not exceed 12 cm. It is necessary to cut it out of oblique.
After that, the veil must be bent several times and perform comprehensive processing, thereby making a double tape. Fixing is carried out in several screeds. When working, it is necessary to take into account that closer to the edge of the petals should become more.
After a sufficient number of flowers is performed, curtains can be decorating. The density of the application in this case should decrease either to promote up, or down. Best of all, artificial flowers will look if you stand them in several color shades that will become lighter as you move towards the curtains.
Another way to decorate for lambrequin is the creation of flowers from the fabric, using beautiful beads selected in the tone.
From the fabric you will need to cut circles gradually decreasing size. Each circle will need to be folded in half and tighten in the middle of the semicircle.
After that, from dense tissue cut out the basis. It is on it that the stripe is produced already ready-made petals in the center, to which the bead is sewn.
As a result, several dahlias will appear on the lambrequen, which very significantly diverse the design of the room.
If you wish, you can still make the buds of the same color as ready-made decorative elements. To do this, it is necessary to use the same veil, wire, beads and oblique beyk.
Circles cut out of the fabric, which are also folded by petals, performing an unsecured bud. The middle of the bud is decorated with beads. The wire is inserted into the already treated beaks, playing the role of a stem that is sewn to the flower. Then the place of attachment is trimmed with a cloth, to result in extremely extraordinary buds on curtains.
Article on the topic: Wall cladding panels from DVP - 3 ways