Locking braid with loops to curtains is one of the most responsible stages of work when sewing curtains. The final appearance of the web depends on the correctness and quality of sewing: the amount, depth and intensity of the drapery, the length of the finished product, even the type of cornice. With the help of the tissue strips released over the loops, you can hide ugly and nonesthetics, and the curtain canvas will look so far in the air under the ceiling.
Curtain ribbon
Such work in the atelier is not noone, so if you sew a loop on the curtains with your own hands, you can save a decent amount. The main thing is to calculate your own strength and skills. If you doubt, practice the curtains. In extreme cases, do not risk-go to professionals (especially if we are talking about the processing of expensive and complex fabrics).
Choosing a curtain ribbon
Before you sew a loop to the curtains, select the material to work. The loop with loops for the curtains is a few species. It may vary:
- In width: with walking parallel 2, 3 and more mounting strips. Basically, the braid is used, the dimensions of which do not exceed 6 cm, but there are products with wider 10 cm.
The thinnest (2.5 cm) are used for simple curtains in the country, more expensive wide variants will not only hide the unattractive cornice, but also corrected the length of the product (if necessary) - after all, the slope with a wide ribbon can be hooking on hooks for any of the parallel strips With loops.
- According to the resulting folds. Smooth, lying up with parallel strips, the drapery is called a column. Asymmetric folds may be made to bulbs, in the form of a butterfly wings, etc.
- According to the intensity of the drapery: a braid for curtains with hinges can, when forming an assembly, reduce the width of the curtains of the curtains in one and a half, two or even three times. The number of folds and their depth depends on the fabric and the type of curtains. For dense curtains, the maximum assembly coefficient is 2.
The larger on the surface of the tissues of decorative parts (drawings, prints, textured or volumetric elements), the less the material needs additional decoration - drapery. Conversely, uniform, thin curtains require (to create a completed image) of a large amount of folds.
- According to the type of manufacturing material: the transparent product is used to sew a tape to the curtain from the organza, veil or mesh fabric. It is processed by the edge of the curtains.
Article on the topic: Sound-absorbing panels do it yourself: a sequence of actions
Calculation of fabric
The calculation of the tissue is made depending on the selected assembly coefficient:
- First, the width of the carnis is measured. The dimensions of the window of the window do not matter, because often the upper mounts are not limited to its ceiling sizes, but are mounted on the wall to the wall to visually increase the horizontal parameters of the wall.
- Then multiply the resulting digit on the folding coefficient. We add allowances for the processing of lateral sections and get the width of the fabric, which is necessary for the sewing of the product.
Seving tape (step-by-step instruction)
Remember: To properly sew the ribbon, the minimum portno experience is required. Newbies are better to start with inexpensive fabrics for the most insignificant sections of the apartment: try your hand at a simple kitchen curtain or curtain for storage room.
If you are determined, proceed:
- Before you sew a tape to the curtains, adjust the working tool - a sewing machine. First of all, pay attention to the tension of the upper and lower threads (so that the interweaving does not "appear" on the surface of the fabric) and the pressure of the guide foot (with a strong pressing the fabric will be frowning).
- In order to smoothly and beautifully sew the tape for the loop, check all the parameters once again: the vertical and horizontal sizes of the curtain web, the length of the curtain ribbon. Align if you need uneven cutting edges, we remove the factory edge (it tightens and deforms the canvas).
- After alignment, we make a flexural seam on dense portroom tissue. Another thing is the tulle curtains: in most cases, the organza is regulated in length not from below, but along the upper edge, since at the bottom of the web has already been processed by a special seam with a weight loss.
In this case will have to:
- Cut an excess piece of fabric. On the cut line, you pull the thread over the entire width of the product - this method guarantees the correct geometry of the edge.
- Or unscrew the excess strip with the processed edges on the front side of the canvas, forming an additional rolling for decoration.
Article on the topic: Interior decoration of the house from the bar: novice advice
Deciding with the method of processing the edge, proceed to work with the braid. Having heated iron to join the formed fold fold and begin to take the curtain tape.
- Over the sides, over 2 cm braids, pre-released these sections from the scary yarns, between the upper edges of the ribbon and the curtains, we leave a distance of at least 3 mm (the curtain tape should not perform above the edge of the curtains).
- To sew a curtain tape to the cutter, you must perform at least 2 seams. The first is addicted to the upper seam. Then in the same direction, from the same "point of reference" we make a lower line.
The minimum number of seams - 2. For wide ribbons, the number of machine lines should coincide with the number of loops strips: each fastener row is fixed with a seam.
View video design
- To gently sew a tape with hinges, you need to beautifully and correctly arrange the bottom seam: it is important to correctly align the curtain and curtain web. To form a flat facial surface (at the top) during the drainage, evenly pull the cloth curtains with a tape. It is necessary to do it with uniform efforts, not too vigorously in order not to break the needle.
- In the last stage of the work we form a fold, pulling the cords on both sides. Released threads we disguise under a curtain ribbon or hide in special bags. They are made from braid, and you can sew from the wrong side on the sides.
You can hang the curtains on the cornis in another way - to engage the loops on the curtains:
- The original (up to 5 cm) strips of fabric look original. With their help, it is easy to lengthen the product in height.
- You can sew the loops on the curtains from the thread. This method is suitable for light lace or knitted curtains when the product does not need to be draped, and vice versa is a smooth surface to emphasize the beauty of decorative parts. Fastenings are formed with crochet: air loops in one or more rows.
Article on the topic: Shower cabin without roof