Recently, filament curtains have become quite popular, but few people know that they can be made it from the most common stationery clips and such girlfriends, like remnants of wallpapers, old postcards, dense paper, tissue trimming and braid. Quite interesting options are obtained using colored threads, beads, English pins.
For the manufacture of curtains will fit the clips of any size.
How to make curtains from clips?
You will need:
- Stationery clips;
- Trimming wallpapers (any paper);
- scissors;
- Glossy varnish on a water basis.
For the manufacture of curtains from the clips, you can use logs, newspapers, postcards.
First of all, it is necessary to stock materials: buy stationery clips of any value (for a filament curtains are suitable as small and large), pick up a dense paper. It is very good for this purpose to use the remnants of wallpaper or greeting cards, but the usual printing paper is suitable. Approximate quantity of clips can be calculated after the first thread is performed. You can combine various types of clips and thereby get an interesting solution and an unusual composition.
When everything you need prepared, you can proceed to business. First cut paper strips: the width should be equal to the length of 1 clips, while it is necessary to take 2-3 mm in order to facilitate the mount, the length of the strip is equal to the width of the clips multiplied by 4. Then take a paper blank, bend it in half, then both ends Put in the middle. You must have a small little book with two pockets, in which the paper clip will do.
If you want to make a more magnificent pad, then increase the length of the strip several times, the principle of converting the same one.
Clip scheme.
After you have made the first part, picker the second paper clip, put on the rolled paper pad, continue work until you make the thread of the desired length. Thus, the entire curtain is performed. Instead of paper, you can use colored threads or trimming fabrics, in this case the material is simply wounds on the basis, and the tip is hiding or lined. An interesting solution can be obtained if you use the usual English pins along with clips to which a variety of beads are riveted. If for some reason you do not satisfy the color solution, you can safely paint the threads in any color with the help of acrylic paints or even the verses.
Article on the topic: How is the installation of rafters?
In order for the curtain to have a beautiful shine and served a long time, it must be covered with a water-based glossy varnish . Take 1 thread, then it is completely lowered into varnish, remove it, give a stitch to surplus, suspend for drying, pre-laying the glue to the floor so that the varnish drops are not stained with the surface. Finished threads are fixed in the door opening by any suitable way. It can be disguised screws and nails (such a fastener is suitable for the arch) or parts attached to a wooden bar or picturesque roasting, everything depends on the writer's idea.
Make such curtains with your own hands simpler, manufacturing technology is also available to a child. To do this, you will need only a little imagination and infirmized materials. Create, dare, and everything will succeed!