Sometimes such an unpleasant moment occurs as a crane breakdown. This, it would seem, a small breakdown can pretty spoil the mood for the whole day. Especially when you hurry somewhere and you need water in a normal stream.
Scheme of water tap.
Repair of the mixer for the bathroom can be easily made with your own hands.
Major Mixer Machine Bathroom
Crane device diagram.Leakage. At first, it may be a few drops that are monotonously falling and create an unpleasant noise. Next, the flow of water may increase up to a strong pressure. Leak can be in different places. For example, water can rip away from the tap itself, under the base of the hussak or hose, and in the places of their connection.
- Crane makes buzzing sounds when opening or with a strong water pressure.
- Cold water leakage regardless of what crane you open - cold or hot.
Below will be described by the measures that need to be used in the breakdown, they will help repair different malfunctions. Following the advice, you can easily repair the crane in the bathroom on your own.
Replacing the cartridge
Scheme of a single-art mixer.
Probably, each has repeatedly happened when when the crane is opened, for example, in the kitchen, a buzz was distributed in the bathroom from the hussak. Sometimes a similar process is even accompanied by rattling. This causes that cold and hot water mixed with each other when the crane is closed. Because of the higher pressure, cold water replaces hot, and therefore, waiting for a jet of hot water, get the flow of cold or icy.
This problem is characteristic of a worn cartridge. To fix it and get the water that is needed, you just need to replace it.
Types of cartridges:
- Ceramic. Provides two metal-ceramic washers that are closely attached to each other. A characteristic feature of such a cartridge is the absence of rubber pads.
- Ball. It has a type of steel stainless head. In the plastic housing, a hollow ball with a pin and a hole is attached. A handle is attached to the pin, when rotating which the rotating ball adjusts the water supply of the required temperature.
Article on the topic: Instructions for cutting ceiling plinth in the corners
Crane design circuit.
For repair it will be necessary:
- Adjustable key.
- Cross and straight screwdriver.
- Pliers.
- Drill and drill set to her.
- Set of hexagons.
- If necessary, spare parts of the mixer.
Before repairing the mixer, it is necessary to overlap the riser with water.
Stages of work on the replacement of the cartridge in the bathroom:
- Using a screwdriver, pull the cap from the mixer.
- Under the plug, the screw must be unscrewed by a hexagon or screwdriver. During this process, act carefully in order to avoid damage. In the case of deformation of the screw, it can be removed by a drill.
- A little swaying, pull up the handle of the crane. It is usually removed fairly easy and fast.
- Hands or pliers unscrew the decorative element. Do not forget that you need to twist counterclockwise.
- Carefully unscrew the nut that crept the mixer.
- Repair of the old or replace the cartridge to the new and twist all the details in the reverse order.
Crane in the bathroom
The diagram of the two-fledged mixer.
The flowing water from the crane can deliver a lot of trouble. Dripping water makes an unpleasant sound that can hardly bother. Unused liquid may affect water bills. And the repair of the crane will require a minimum of time and costs.
There are three main places from which water flows:
- The base of the crane.
- Water supply hole.
- Place connections with hose.
Carrying out repairs, it is necessary to prepare such tools:
- A variety of screwdrivers.
- Drill with a set of drills.
- Tow.
- Adjustable key.
- New rubber gaskets.
- Spare parts of the mixer (if necessary).
Before proceeding with the work, you need to overlap the riser with water.
During the leaks at the scene, the hose is necessary:
- Using the adjustable key to twist the hose. Be careful not to damage the thread.
- Inspecting the node, find a broken part;
- Replace the old seal to the new one. Recommend to use silicone gaskets.
Article on the topic: How to make pallets wooden with their own hands?
When water flows from the feed hole, the replacement of crane-trays will be appropriate. Crane-tank is an element in the mixer handle. It does not give water to get out of the crane when it is closed. This detail is two types: ceramic and rubber gasket.
Repair and replacement crane in the bathroom can be carried out at the following steps:
- With a screwdriver, remove decorative elements from the handle.
- Unscrew screws that mount the handle to the hussac case.
- With the use of the adjustable key, remove the crane.
- Replace old details on new ones. Try to hardly tighten the threads. Thread deformation can negatively affect the service life of the crane.
Mixer repair tools.
When water flows from the base of the crane, it should be repaired or replaced eccentric.
The process of replacing the eccentric in the mixer:
- Using an adjustable key, you need to unscrew the nuts that attach the mixer and eccentric.
- Replace old on new ones. It should be known that there is a need to compact the compound with the help of flax, sealant or packle.
- Eccentrics need to be installed symmetrically. This can be achieved by screwing them with the same number of revolutions.
- Then you should shut buttups.
- Try to screw the nuts of the mixer to the eccentric. If you turn on the water, and it continues to flow, it is necessary to twist the nuts to twist the nuts with a reclodder key.
With cranes there are many diverse problems. There are minor breakdowns that are usually postponed. But they will accumulate that it can then lead to the need to replace the whole crane, and may have to repair the mixer and hussac for the bathroom.