Creating rolled curtains with your own hands - the task that any home master can perform.
Scheme inserting weightlifter.
The lifting mechanism that is used in the specified structure is made as a shaft, raising or lowering the curtains due to its rotation.
Such curtains do it yourself - the task is simple and interesting to accomplish it, you need to purchase the necessary materials and tools.
The use of rolled structures with the lifting mechanism in any room can transform it beyond recognition and will allow solving a wide variety of design solutions. But when installing rolled curtains, it is necessary to take into account all the nuances, since you can make the design stylish, and completely destroy the designer idea.
Rolled curtains or blinds are fixed directly on the frame or in the window opening, they although they look simple, but no less interesting than expensive curtains or lambrequins.
Rolled structures have a convenient lifting mechanism, so they found their use in both offices and apartments.
Advantages of Roller
These elements are equipped with a convenient lifting mechanism, they can be used independently or together with other elements of window design. This design can be installed on plastic and on wooden windows. They close the window tightly, and just care for them.
Scheme fastening garters.
This design has a simple lifting mechanism, so it does not fail in the process of using such curtains. With the proper installation, they allow you to completely darken the room, there is a wide selection of color solutions.
Some people confuse Roman and rolled curtains. They are similar in their appearance, but the Roman curtains are collected using the cords system, and the rolled curtains have a lifting mechanism in the form of a bar, which rotates and is located at the top of the structure.
Article on the topic: Floor screed with clay: Alignment technology, which faction is better in the apartment, ceramzite concrete with your own hands
Types and types of roller
The shaft design can be open or closed, an electric motor can be used for simplicity of curtains.Rolled structures can be with or without cassettes or as a roller. According to the principle of management, they can be adjusted manually using a chain or electric drive. There are such structures and materials used, it can be a variety of fabric types.
Features of creating rolled structures with their own hands
Consider an example of creating such a design with your own hands, while the roll will be at the bottom, and at the desired height, the canvas is fixed with the help of tapes.
First, the windows are measured to which the specified curtain will be attached. The width of the fabric should be greater than the specified size by 2-4 cm, the length should be more than 5-15 cm. Depending on which room you will install this design, make the choice of fabric and its drawing.
To work, you will need:
- Two pieces of fabric required size;
- Ribbons that will be used as garters, they must be twice as long as the curtains + 30 cm;
- Wooden timber or fastening pipe, their width should be 1 cm less than the width of the curtain, you can purchase a ready-made cassette system;
- rod or strip for weighting;
- Screwdriver and screws;
- stapler;
- Thread, needle.
Procedure for performing work
We fold two pieces of fabric with the invalid side and stitch from three sides, after that the resulting bag turns. Now you need to insert a weightlifier, or for him you can make a special pocket.
They stroke the finished canvas and the stapler nourish it to a wooden bar, if the pipe is used, the fabric turns around it around it and is stitched. The garters are folded in half and are also fixed on the bar using a bracket. After that, we carry out the mounting of the bar to the window frame.
Article on the topic: Design of flower pots do it yourself
From above the timber need to decorate. If you plan to remove the scope, it is possible to mount it on special hooks. For mounting on a plastic window, you need to use bilateral tape. The manufacture of rolled structures is an exciting process, for this you do not need to have special knowledge or materials, and as a result you will get a beautifully designed window.