Table of contents: [Hide]
- Design Description and Necessary Materials
- Children's cradle do it yourself
- Mounted process completed
The appearance of a child's family brings not only joy, but also a variety of troubles that fall on the shoulders of parents. They need to take care of many ways. Parents must think about the future and the present of their infant. You have to spend huge funds on the cradle, a crib and stroller.
Scheme of a baby cot.
Many rushed into furniture stores to immediately furnish the entire children's room. However, you can make a cradle for newborns with your own hands. It will delight everyone home and will lead to savings of a huge amount of funds that can be spent on no less useful things for a child. At the same time, the children's cradle can be made of various materials.
The most important thing is to remember that they should be environmentally friendly, so that the infant is not harmful.
The cradle recently is not so often used by the parents, but this thing for the baby is very useful. It can be done for many years. Still grandchildren and great-grandchildren will be able to use her to swing their babies before bedtime.
The best option is the cradle for a newborn, which is made of wood. This material is environmentally friendly, which will not have a negative impact on the health of a small little man. So, it is worth talking more about how the children's cradle is done with their own hands
Design Description and Necessary Materials
The variant of a baby cot.
The estimated design will not swing entirely. Swing will be only the cradle itself. A similar type is more secure and reliable, since the cradle is protected from turning. Children's cradle with his own hands, made on this principle, will serve as faithful to all family members. The design provides clamps that will prevent excessive swinging of the cradle.
Article on the topic: cracked tile on the wall in the bathroom - what to do and how to change
Materials in this case will serve:
- wooden shield;
- boards;
- self-tapping screw;
- glue;
- screwdriver;
- roulette;
- pencil;
- It is impossible to do in this case and without a screwdriver and hacksaw.
The milling machine will be used to cut the figure parts of the cradle. They are also provided in this case. Cutting start to do from the end circle. In this case, the item must be tightly fixed. This is done in order to completely eliminate damage to the desktop, on which all works are produced.
The frame of the cradle must be collected using self-use.
Between the two backs, the bottom boards are mounted using glue and ducks.
Now you can talk more about how the children's cradle is done with their own hands.
Back to the category
Children's cradle do it yourself
Cot assembly scheme for a newborn.
First, it is necessary to place all the contours of the components using pre-prepared templates. They are made according to the drawing. Templates can be cut from ordinary tight paper. They must fully comply with all the dimensions that are presented in the drawing.
- Production of arcs need to start with their drawing. They are drawn with a circulation. By the way, it can also be made independently.
- To cut the arcs, it is best to use a milling machine with a circular. Such a tool can be purchased in specialized construction stores. Currently there are no problems with rental milling machines. In most major stores, such a service has long been no innovation. It can be significantly saved, since the milling machine will need once.
- Now you can mark the sidewall ring.
- Direct feeders need to be done using the jigsaw. This tool can be purchased in any specialized store or rent.
- To process direct edges, you can use the same milling machine, but it should have a copy sleeve.
- In the backs of the cradle, it is necessary to drill holes for the seasons. They must be rented so that the cradle turns out to be symmetrical and there were no problems with its stability.
- Side racks are made from semicircular planks that were prepared earlier. They are glued for two sections of the fabric.
- Under the rods of the lattice, it is also necessary to drill holes in longitudinal fences. They are drilled in a step, which is determined in advance. It should be remembered that all holes should turn out to be deaf.
- Now you can proceed to the balls of clamps. They must have a diameter of 50 mm. They must be pre-fixed in the holes whose diameter is 45 mm, and then turn over and drill holes on the reverse side.
- The centers of the holes are scheduled on the frame racks.
After that, all the details of the cradle need to be seized, rounded and coat with acrylic varnish. Acrylic varnish in this case is used because it is an environmentally friendly product. It can be used for children's furniture.
Baladachina scheme in the crib.
Grinding is made using a grinding machine. You can use and the grinder with a pre-mounted grinding circle. Do not forget about emery paper. In this case, it can also be applied. However, the handmade grinding method is inferior in machine speed. When using a manual method, cash savings occur.
- Rods and bowls of fixators can be coated with acrylic varnish. However, to increase contrast, you can use paint. The most important thing is to remember that the paint must be made of environmentally friendly materials;
- In the racks, the screws are installed by 10 mm. All holes must be closed by the wanks;
- Now you can make the final assembly of the cradle. All components are connected by glue. The glue must be made from the safe material. The cradle is tightened with tape screeds. This is a fairly effective method that has been used for a long time for many professionals in practice.
Back to the category
Mounted process completed
The variant of a baby cot.
So, you can state the fact that the children's cradle is presented with their own hands. All homemade will be happy to such a gift. For many families, buying a similar cradle is not possible due to its high cost. Children's cradle with her own hands is really the right choice.
As it is clear, the design process is quite complicated. You never need to despair, as in this article all the process is decomposed on the shelves. The most important thing is not to forget that all necessary tools and materials are available. At first glance, work seems just impossible, but most importantly - start the design process.
Yes, the work consists of a huge number of consecutive stages, but if you clearly follow them, you can get a high-quality cradle for your child, which will serve not only to your children, but also grandchildren and great-grandchildren. They will also say thank you by my grandfather for such a high-quality and beautiful gift.
Article on the topic: Illumination of the mirror in the bathroom: the best ideas and methods