Making a coffee table with your own hands is a fairly interesting creative process. Make such a thing is quite simple, for this it is not necessary to dive into the study of furniture business, but some nuances and features of the technology need to know. In addition, making a coffee table on its own will help you to save significantly.
The original decoration of the coffee table will make it exclusive.
Coffee table from parquet stove and bassine
It will take:
- Parquet shield 600x600 mm;
- Wooden bales - 4 pcs.;
- Furniture corner - 8 pcs.;
- Wood putty;
- ceramic tile;
- Tile glue;
- Tree primer;
- Screwdriver (screwdriver) and screws;
- grout for seams;
- Rubber spatula;
- sandpaper;
- acrylic paint;
- Aerosol automobile varnish.
Drawing of a simple coffee table.
You can make the coffee table from the parquet shield and Balyasin. First of all, you need to purchase everything you need, after which you can proceed to the case. Balyasits are made of wood, so it is necessary to give them acclimatized in roommates for 3-7 days. It is not much difficult to assemble the table, first on the table top there are places for the feet of the legs, then with the help of self-samples, you screw the furniture corners (2 per 1 balaasine), then the legs are attached to them. If you are at least a little familiar with the furniture business, then instead of corners you can use the seasons. In this case, it is necessary to make the same holes in the tabletop and legs, after which it is planted to plant the wrappers for carpentry and combine the design.
After the coffee table is assembled, you need to finish the edges of the tabletop. For this purpose, it is undesirable to use the finished edge, since with the further operation of the product it can turn out. It is better to make a little effort and make a stronger edge with a putty. First, the primer is applied, after it is burned, the edges are put off (the material is distributed by a thin layer using a spatula). Then the surface is thinned with thin sandpaper, put a putty again. The process is repeated until smooth and smooth edges. The edge can be made embossed. After you have applied the last layer of putty, attach a lace tape to it and press it slightly, then carefully remove the lace. This turns out interesting impression.
Article on the topic: Kiznicker brilliant, horizontal and other species. Landing and care
If you wish the legs (balasins), you can bind to each other using metal bars.
The top of the countertops must be sanded with sandpaper (first with large, then with small grain). After that, the table is applied to the table. Next should the painting of the product of acrylic paint. It is best to use the color that is present in the ceramic tiles, but you can pick up a contrast hue. The paint is applied in 2-3 layers with a mandatory intermediate drying. All irregularities are eliminated using sandpaper. In order not to form in the influx, it is necessary to apply the paint with a thin layer. At the same time, it is desirable not to return to the scratched places, otherwise the brush can pull the acrylic already grabbed.
Next, on the table top there is a place under the ceramic tile (you can replace the mosaic), the edges of the painting scotch are stuck. Then the tile glue layer in 2 mm is applied, stick the tile, leave until complete burials. Next, it is bred by the grout according to the attached instructions, after which the seams are filled using a rubber spatula. After the grout dries, it must be washed off with a damp cloth. The tile is closed with a film, the edges are sampled by a painted scotch, cover a table with a car lacquer in an aerosol. The varnish spray with a thin layer at a distance of 30-40 cm, allow to dry (the procedure is repeated from 3 to 5 times). Coffee table ready!
How to make a coffee table from flowercaps?
It will take:
- Flower porridge height of 50-60 cm;
- Round Glass Countertop;
- Special suckers for fastening glass;
- plaster or alabaster;
- paint in aerosol;
- sisal fiber;
- Sea shells or other decor.
If the porridge is made as a module, the design of the table may vary.
Who would have thought that the original coffee table could be made from ordinary flower porridge. First you need to choose materials: buy a large plastic flower pot, suitable in size glass countertop, special suckers for installation of glass. First of all, you need to paint the chest. For this purpose, it is best to use aerosol paint. An interesting effect can be achieved if you first apply a black shade, then spray the gold paint with a thin layer.
Article on the topic: How to organize a wardrobe inside
Plastic flower pot is easy enough, so it must be dragged. For this purpose, it is best to use gypsum or alabaster. Water poured into the container, the plaster falls asleep, then everything is thoroughly mixed. There should be a solution that resembles a thick sour cream in a consistency. The diluted plaster is poured into the porridge, the solution should not reach the edges of the product, it is necessary to leave a free space at 20-25 cm for the location of the decor.
After the plaster completely freezes, you can proceed to decorating the product. First, the sisalous fiber is distributed over the surface, then corals and marine seashells are installed. You can use any other decor: beads, pebbles, flowers - it all depends only on your imagination. After decorating is finished, attach suction cups, then the glass is installed. The original table made by your own hands from the available materials will become a real decoration of your home.
Coffee table from plywood and mirror tile
It will take:
Depending on the sizes of the mirror tile, decide on the size of the table.
- plywood sheet;
- electrolovik;
- Mirror tile;
- liquid Nails;
- Furniture wheels;
- corners for furniture;
- screwdriver.
An interesting coffee table can be made from plywood and mirror tiles. The design is a rectangular or square box on wheels, decorated with mirrors.
First of all, it is necessary to purchase a mirror tile, only then, given its dimensions, determine the length, height and width of the structure.
Next, with the help of an electrolybiz, the parts of the box are cut out, the elements are connected by special corners, which are screwed by self-drawing inside the design. Instead of corners, you can use wooden rails or make a fastening on the wanks. On the bottom of the table fasten the wheels. Then, liquid nails are applied to the surface of the tile (in the center and around the perimeter) so that when gluing, the glue does not come out. The tile is pressed to the table surface, keep some time, then release. Decor all sides of the box. The original coffee table is ready!
Article on the topic: Bamboo curtains on the door
Instead of a mirror tile, you can save the table with wallpaper or cloth, edges to decorate with the help of a stationery buttons with a solid shiny surface. To give strength, the surface is covered with acrylic parquet varnish. Beautifully look at the table, decorated with wooden sleeves, which are glued with liquid nails, after which they are covered with varnish. The space between the details is filled with grouting or putty for wood. Make a coffee table with your own hands from affordable materials is not so difficult, if you show fantasy and stock patience.