Water in the washing machine is added through a special bay hose. It is with its help a connection with a water supply. The problem is that it can cause water spill. Vina can become different reasons for this:
- Poor compressed compression sleeve,
- Burst the upper layers of the hose;
- The length of the hose is not sufficient
And, although most often it comes complete with a washing machine, such situations are not uncommon. Pay attention to these aspects to avoid unpleasant situations.
Views
Types of fuel hoses:
- With fixed length. Constitute a pipe from 1 to 5 meters long;
- In the bay. Length comes to 10 meters;
- Telescopic. Thanks to corrugated length, it is possible to increase the stretching method;
- With aqua-stop system. A system that avoids leaks.
Bay hose with protection (aquastop)
This system will pay special attention. It allows you to additionally secure both your property and neighbors' apartments from flooding.
At the time of supplying water to the hose applies high pressure and to withstand it in the hose there is a double wall. It is able to withstand pressure up to 70 bar. But even if the hose breaks through, the water enters the knob, which is filled with powder. It is during wetting that expands and blocks the further flow of water. Often the valve on the electromagnet is added to such a system. In this case, the flow of water overlaps the valve.
There are models in which the automatic pump is built. It starts pumping water if the valve has not worked. But after such an emergency situation, the hose becomes unsuitable for further use. . It is impossible to repeat it.
Specifications
Consider several hoses of both domestic and imported production.
Article on the topic: how to align the walls in the bathroom with your own hands
1. Cotali UDI-Black (Italy).
- Length - 2 meters
- Permissible temperature of 1000 degrees,
- Able to withstand pressure up to 80 bar,
- Bandwidth of 42 liters per minute.
2. ELECTROLUX (Sweden).
- Length - 1.5 meters
- Permissible temperature of 900 degrees,
- Able to withstand pressure 60 bar
- Equipped with aqua-stop system.
3. Uglichsky plant of polymers (Russia).
- Permissible temperature of 900 degrees,
- Compatible with all the well-known foreign brands,
- Withstands pressure up to 200 bar,
Cotali Udi-Black Cotali Hose (Italy)
ELECTROLUX FILLING HOUSE (Sweden)
Flashing hose Uglichsky Polymer factory (Russia)
What is the most popular?
There is one important nuance: the distance to the drain is not recommended to do more than 15 meters. Most often, filled hoses are used with a length of 3 to 5 meters.
Check all the diameters of the holes, seals, nuts and other fittings. Acquire the hose better than the same company as the washing machine. And if there is no such possibility, then you need to pick up a hose as close as possible by characteristics.
Correct location
The competent installation does not have any features, the main thing is to avoid inflection and prevent the hose after the crane go to the top.
How to connect?
The hose has a carving that corresponds to the standard size - three-quarters of an inches. With its help, it is connected to the locking crane. In new homes such a place is already provided. If the house is old and the project is not scheduled to accommodate the washing, the hose is joined with a pipe before the mixer in the bathroom.
To connect the filling hose of the washing machine to the pipe with hot water yourself - watch the video.
Why flows: frequent causes of leaks
The most frequent problem, due to which the leakage occurs, is a fragile connection with a pipe or washing, often cases of simple aging and wear of rubber gasket. The only right solution is to replace this gasket.
Article on the topic: Decorative street lamps: Cozy lighting for the garden and cottages (35 photos)
Another possible reason may be the incorrect position of the hose: it can be twisted or ground. Remove the hose natural position.
Replacing the filling hose
Also the cause of the leakage can be the wear of the hose itself. This may occur because of the mechanical effects or handover of the tube at the connection site. The replacement procedure itself is not such a difficult event:
- Discharge water.
- Disconnect the damaged hose from the water supply and from the machine and set the new one.
It seems that everything is very simple, but often these works lead to the need to lengthen the filler hose. This is no longer such a simple procedure if you failed to find the hose of the same manufacturer as the washer. Selection of a suitable diameter of pads and connectors can become a very troublesome business. Therefore, if you encountered such a necessity, many repair shops are recommended to turn to professionals in order to not aggravate the problem.
In the video below, it is shown in detail how you can independently replace the fuel hose without the help of the wizard.
D. La impeccable operation of the washing machine, it is necessary to comply with simple rules that are written in the user manual. . And in the event of a breakdown, you do not need to try to eliminate the problem yourself. Better this question to entrust the master.