An integral element of the design of the window opening along with the curtains is the cornice. The type of composition as a whole, ease of operation and reliability of curtains depends on the proper choice of the cornice.
High-quality curtain cornice
Rules for choosing and installing cornice for curtains
Installing karnis for curtains with your own hands under the power to any home master. The installation method depends on the design material, cornice configuration, installation site (wall or ceiling) and the surface finish option to which fasteners are produced.
Before installing the eaves, besides its conformity to the interior of the room and the design of the curtains, it is worth considering a number of factors:
- Strength. The design must withstand the weight of the Gardin. Based on this, the material is selected (metal, wood, plastic or string), quality and rod rod or profile.
- Method of mounting to the surface. Take into account the total weight of the cornice and curtains, as well as the type of coating on which the design will be installed. There are three main fastening methods: through through holes in the cornices itself to the surface, on consoles (supports) or brackets.
- The size. The length of the eaves exceeds the windows width at least 40 cm.
- Number of rows. Depending on the number of curtains, one-, two-, or three-row system is selected. Accordingly, its width is dependent on this factor.
Turn the curtains for the curtain only after the end of all repair work. The exclusion is stretched ceilings. In this case, the location of the attachment is determined in advance and under the film or the fabric is installed in a mortgage wooden bar for the subsequent installation.
Installation of wall curtains
Choosing a suitable model, and determined with the location of the location, you can start the installation. To attach the cornice to the wall you will need the following list of tools:
- Electrode or perforator.
- Screwdriver or screwdriver.
- Small-raised hacksaw.
- Construction level and plumb.
- Step scrub (you can use the table).
- Roulette, ruler and square.
- Pencil.
Article on the topic: What to position between the windows?
Fastening the cornice for curtains to the wall using brackets is performed in such a sequence:
- The cornice is applied to the wall and its optimal height is determined relative to the top edge of the window opening (on average 6-7 cm).
- With the help of the level, a direct horizontal line is carried out.
- Applying a roulette, on the conducted line marks the places of attachment.
- With the help of a drill or perforator, holes under the dowel drill. For standard attachment, a dowel is 6 × 30 mm or 6 × 40 mm.
- Dowels are inserted into the holes and attach one corner bracket for the eaves. The plumb is checking the location of both attachment points on one vertical axis.
- The second (other) bracket is attached and again using the level, their location in the horizontal plane is checked.
- After that, you can collect and install the curtain cornice, visually checking its correct location.
In the process of drilling, the drill can imperceptibly slip from the intended point to several millimeters, which will eventually lead to the consequence of the structure. To avoid splitting in places of drilling, you can make a recess 2-3 mm nail.
Features of mounting ceiling eaves
Most multi-row ceiling structures are made of PVC or aluminum, so you need to consider the weight of the curtain from the very beginning.
Installation of ceiling cornice
To install the ceiling cornice for curtains, the same set of tools as for wall fasteners, but the installation of eaves for curtains has some differences. Installation of ceiling karnis for curtains on a concrete base:
- On the surface of the ceiling is marked.
- The small-scale hacksaw plastic or aluminum profile is cut to the desired length, plugs or finishing elements are installed on the slice location.
- In the front part, the holes are drilled by a diameter of a little more hats of self-pressing, after that, they pick up the drill bit of smaller diameter (under the dowel) and drill the side adjacent to the ceiling. The greater the curtain weight, the smaller the distance between the holes.
- The profile is applied to the ceiling according to the markup and is attached through the central hole by one screw. Thus, it remains the ability to adjust the distance to the wall, slightly turning the profile.
- The location is checked relative to the wall, in the case of the need is adjusted, and the holes under the rest of the dowel are drilled.
- Fixation is made in all places of fastening.
Article on the topic: Garden from room plants in the apartment: closer to nature at home (37 photos)
When installing on the plasterboard ceiling, the installation is performed in the same sequence, however, the spacers of the butterfly (Molly) are used as the fasteners (Molly).
Installing eaves for curtains on a stretch ceiling to a mortgage bruse requires caution and accuracy, since the repair of the panel damaged by the sharp tool will cost anyhow. Places of drilling are marked with a marker, after which small pieces of packaging tape are pasted on them (this will fix the diameter of the hole and protect it from increasing as a result of the tension of the canvas). Next fastening to the ceiling of cornice for curtains is made in a standard way. It is important to check the surface adjacent to the coating for the presence of sovereigns or sharp protrusions, if they are detected, it must be deleted.
If for some reason the installation on the ceiling is possible, and it is not possible to return the product to the product, you should not despair - you can attach the ceiling eaves to the wall with M-shaped brackets.
Fastening the curtain
Fastening for curtains is performed in various ways, these options are most common:
View video design
- Curtain tape - sews along the top edge of the curtains and is equipped with a cord for adjusting the length of the canvas. May have one or two rows of loops.
- Removers - metal or plastic rings installed on the holes in the canvas.
- Hooks. No aesthetics, however, are almost always hidden behind the facial decorative panel.
- Metal or plastic rings, in contrast to challenges, are installed along the top edge of the tissue.
- Fabric loops.
Now you can easily mount the cornice for curtains. We hope the question will no longer have how to install the cornice for the curtains.