Glass - enough normal already material for the manufacture of various interior items. The shelves and decorative inserts in the floor, doors and countertops are made of thick tempered material. For the manufacture of tabletops, glass is suitable as no other material: it is easily clean, it is not subject to corrosion and does not deteriorate from moisture, does not interact with the chemicals of modern detergents.
Scheme of a glass coffee table.
Very often glass countertops are made on coffee tables. The disadvantage of these products is their rather high cost, which is why many are interested in how to make a glass coffee table with their own hands.
What will need to work with glass?
The complexity of the material involves the presence of a special tool tools for glass processing:
- glass cutter diamond or roller;
- Pliers with special linings on sponges;
- drill or grinding, disks for grinding, felt circle;
- Emery bar (carborundone stone).
In addition to these mandatory tools for glassmaker, other materials will be needed:
Tools for working with glass.
- Sheet glass tempered with a thickness of about 1 cm;
- plywood fat;
- glue "Metal glass";
- Goe paste, grinding;
- Mittens, glasses for eye protection.
Before starting work, it will be necessary to develop a product sketch, make a pattern of thick wire or fiberboard. For the first experience, it is better to prefer a simple tabletop shape (rectangle, triangle).
How to chop the glass?
For a beginner master who wants to make a coffee table with their own hands, there is a good advice to determine the pressure of the press on the glass cutter: work out on household scales by clicking on them several times to remember the force that shifts the pointer to about 2 kg. After that, you need to fill a hand on unnecessary pieces of glass, learning to carry out a cutter with a constant pressure.
For cutting, a piece of glass is put on a flat surface, underlay a dense non-infective fabric. Wheel roller glass cutter lubricate with any liquid oil (vegetable, machine). Cutting in a straight line is made in the metal line in the direction from the long point to itself with a constant identical pressure on the tool.
Article on the topic: how to sew classic curtains in the living room with your own hands
Glass cutting circuit.
If the reserve line is obtained in unclear, the glass is slightly tapping from the bottom of the metal object or the glass cutter head. After that, the cuts are combined with one of the faces of the table or the straight edge of the surface on which they made cutting and pressed on the part that they want to remove, with one sharp movement. At the same time, sites that are leaving the line of cut can be obtained. To remove them use pliers with rubber overlays or a special recess on the glass cutter head.
All cuts of countertops are treated in several stages:
- Corundum sandpaper is used for rough processing. The tool is wetted in turpidar or kerosene before work. Slices are stepping by moving the tool along the cut.
- The grinders are treated with a face of small revolutions (1200-1700 rpm). In the presence of an electrofolder, slice on a circle with diamond spraying. Grinker grinding disks for this stage 100-200 grit.
- This stage is performed as the previous, changing the discs into smaller (300-600 and 1000-2000 grit)
During the execution of grinding works, it is necessary to take care of compliance with security measures: to wear safety glasses and mittens. The processed surfaces are constantly wetted or grinding under the jet of water.
In conclusion, the sections are polished with a grinding with a felt circle, applying a paste gay on him. Processing is made to a characteristic glass shine.
Glass table manufacture
Figure 1. Metal support scheme for glass table.
You can still postpone the finished countertop and design support for it. The most simple options can be called the purchase and attachment of a set of metal legs (universal supports for glass tables. Fig. 1) and a set of suction cups for glass.
The attachment points of the legs are placed and degreased with acetone or another solvent. The legs are placed with such a calculation so that the slits from the sections to the mounting distance within 8-12 cm, and from the angles 15-16 cm. The top ends of the supports are migrated to the drill, the diameter of which corresponds to the diameter of the sucker. Insert the sucker, fixing them with universal glue. The countertop is placed on a flat surface, the suction cups are tightly pressed on the places marked. To increase the reliability of the attachment, you can apply glue, applying it to the place of attachment of the legs. Turn over the table, slightly sweep the place of attachment with rubber Cyans and put the cargo on the worktop. After 48 hours, the glue fully captures and the coffee table from the glass will be ready for operation.
Article on the topic: Bedroom kits: Bedspread and curtains - how to choose?
Another support option may be a prefabricated design of plywood or chipboard with a thickness of 20 mm. Details of the support are depicted in fig. 2. It is required to cut 2 parts of each species and connect them as a children's designer, placing feeds to the spopies on square parts on rectangular items.
Dimensions of parts can be arbitrarily changed depending on the desired size of the table. To the upper ends of the supports apply universal glue, suitable for glass and wood, put the worktop and press it with a load for 24-48 hours.
Other ideas for making glass tables
Figure 2. Assembling scheme of plywood support.
In order to create a glass coffee table, you can use various firming materials: old window frames, bottles, squals or stones, etc.
From bottles of an unusual form, you can make excellent legs for a glass countertop. To implement this idea, you will need:
- 6-8 identical bottles;
- 3-4 foam balls or balls from ping pong;
- 3-4 Wooden sticks coinciding with the inner diameter of the neck of bottles;
- 6-8 squares of polyfoam with a side of 20 cm and as much with a side of 16 cm;
- Newspaper paper, paint, varnish, universal glue.
2 bottles are needed for each leg. With the help of wooden sticks, tightly included in the neck, they are connected, simultaneously putting on a combination ball with a hole of a suitable diameter. Squares of foam glue 2 pcs. Larger with less, overlapping them on each other. The designs of bottles and squares with newsprint with newspaper paper are dry, dried day-two and glue the squares to the rates of bottles from above and below. In this case, the leg is obtained, as depicted in fig. 3 (1). It can be painted with acrylic paints and covered with varnish. For a triangular table, it is necessary to make 3 legs, for square - 4 (Fig. 3 (2). The countertop is glued with universal glue and leave under load for 48 hours.
Article on the topic: Condensate on the inlet metal door: why "crying" the metal door
For another option, you will need:
Figure 3. Making coffee table: 1 - Painting of the legs, 2 - Printing countertops.
- Old window frame;
- cuttings for shovel;
- Decorative elements (shells, pebbles, etc.);
- Hemp cord;
- glue;
- Chipboard or board.
Rama cleaned, paint. Cut cuttings in accordance with what height need a coffee table. From chipboard or board cut the dice with a length of 8 cm and a width equal to the frame. Drill 4 holes for the screws at the corners of the dies and closer to one edge - for self-pressing, fastening cuttings to the shock. Screw the screws through the hole in the cutting end, you can enhance the fitting with universal glue. The dies with fixed legs on the self-tapping screw at the corners of the frame, given that her deeper side should form a side of his facetop. Wrap each cutken with a hemp cord, fixing the coil with glue. Place on the glass frame decor, glue it.
Stopper from glass lay on top of the "box" with a decor and fix on glue or "liquid nails". On top of the countertops, you can perform an additional decor from the cord, tied with marine nodes, shells, etc.
Tables with glass countertops look elegant and weightless. Possessing the ability to not look cumbersome, they will be appropriate in the interior of a relatively small room.