Photo
If you decide to change the bed, it is not necessary to go shopping in tedious search for the option suitable for you. Of course, today furniture stores provide a wide selection of beds, among which you can choose the most suitable for the design of your interior. As a rule, the prices of modern furniture are quite high, and not always what it seems to you the perfect option, it matches your budget.
It is best to make a bed of wood - this material is quite durable and will serve much longer than the usual LDSP.
And what if you spend some time and make the frame of the bed with your own hands? In fact, it is not necessary to be a master to cope with the simple frame design. At the same time, you will definitely save a significant amount of money. In addition, the size, color and, finally, the design of the bed is all granted to your taste and fantasy.
Step-by-step instructions: the initial stage of work
In order to make the skeleton itself, first decide on the selection of the mattress. It is necessary to take into account not only its external qualities, but also not to forget about the size of the room. Next will be considered an example of an orthopedic spring mattress having a dimension of 2000 x 1800 x 220 mm. Maching independently frame of beds, you should repel from the size of the mattress you choose.Production of blanks with your own hands
Determining with the material for a double bed frame, it is better not to stop your choice on the chipboard.
In order for the furniture to be durable and served for a long time, a tree is perfect.
In order for the work to go faster, it is necessary to prepare your workplace. First of all, remove from the room in which you are going to work, all extra furniture. Necessary materials and tools should be at your hand. Thus, during the work, you do not have to be constantly distracted.
Article on the topic: Horizontal plastic blinds: design, dignity, care
List of necessary tools and materials:
Double bed diagram with dimensions.
- Electric jigsaw (can be replaced by a manual disk saw "Barquet");
- Miter saw;
- hammer and nails;
- Grinding machine (or finely grainy sandpaper);
- roulette;
- Corolnic;
- simple pencil;
- Drill screwdriver;
- self-tapping screw;
- Metal corners;
- confirmates;
- boards;
- plywood sheet;
- Reiki;
- Morilka;
- varnish.
Add to the dimensions of each side of your mattress of 10 mm. In order to make a frame of beds, gripped clay boards are perfect. The furniture will turn out to be more durable if the material thickness is 30 mm. If you follow the example given for consideration, both side sides of the frame should turn out to be 2070 x 300 mm, and the sizes of the bed back should be 1810 x 300 mm.
Bed frame
Bed frame device diagram.
Confirmates of 5 x 120 are suitable for the scroll of this frame. For the purpose of additional mounting, metal corners can be applied, for the installation of which you will need a screw of 4 x 20.
Bed frame and its main part. Drilling in the side parts of the hole frame for confirmates, keep in mind that their diameter should be 8 mm, and for the front and rear walls - no more than 5 mm. At the same time, the distance equal to half of its thickness should be retreating from the edge of the material, following the example under consideration - this is 15 mm.
Next, you must attach the framework of the framework of the frame to the side parts. As the frames of the base, the rails are perfectly suitable, having a section of 20 x 80 mm. To do this, you should unlock the required number of decks you need. The principle of their attachment is quite simple, because for orientation you have the already installed bottom edge of the frame. Here you will fully suit the screws 4 x 40.
The next step to the main planks, screw the substrate racks. In order for the frame of the frame to be the most durable, the distance between the rails should be at least 150 mm.
Article on the topic: How to choose Curtains Color Wenge to Interior
If your plans are not included in the installation of overhead details in order to give a frame of a more attractive appearance, its surface must be processed. With the help of a grinding machine or manually, using fine-grained sandpaper, carefully skill ready-made framework. In order to give the bed a certain tone, apply the veil surface on the wooden surface, after its complete burials should be covered with lacquer frame. Depending on your preferences, the lacquer coating can be both matte and glossy.
The substrate should be put on a plywood sheet or a shield from thick organic. Thus, you will provide a long service life of the bed.
The next thing you have to do is to decide on your bed height. Without legs, a ready-made frame with a mattress has a height of about 350 mm. Here you can already decide: if the resulting height of the bed seemed to you insufficient, then screw the bars of the tree as the legs having a dimensions of 50 x 50 mm. For their fasteners, both lateral bases and confirmates are suitable. Keep in mind that legs, as well as other framework elements, require mandatory processing.
Final work or bed decoration
Having finished assembling the frame of the bed, it can be noted that you coped with the main task, it remains to start a more pleasant final stage of the work. Taking a decision on the decoration of the future bed, you should consider the interior design of your bedroom. Currently, ready-made elements to decorate the back of the bed can be bought in the store. But if you managed to cope with the painstaking and time-consuming process of making a frame, you may not doubt what to cope with the decoration of the back of the bed to you quite on the shoulder.
If you still decide to do on this issue without any assistance, it is advisable not to conceive a complex form of the back. The fact is that to cope with some options, most likely, you will not succeed, because at least the experience of working with the tree is already needed. The optimal solution will be the choice of strict geometric shapes, which look excellent, and at the same time more simple in the manufacture.
Article on the topic: Curtains on the rings do it yourself: the rules of sewing