The bed is one of the most important bedroom furniture items. The bed should be not only attractive, but also convenient. Today for small-sized apartments use a variety of options that have a set of many useful functions. For example, a single bed may include convenient retractable boxes designed to storing bed linen or clothing. In the children's room, they can easily be adapted to toys, various care products, pillows, and so on. Make such a bed with drawers with your own hands is not so difficult if you pre-draw a drawing, choose the material for assembling the design.
Retractable boxes are very multifunctional: they can store bed linen or children's toys.
Bedroom bedroom models
How to make a bed with drawers, what model to pick up? Options for single beds set, selection depends on the overall design of the room, its destination, the availability of free area is not only for the bed itself, but also for boxes that will be advanced. Free space is required equal to the length of the box.
The optimal option is the use of a construct with a podium, which all drawers will be located downstairs, i.e. at the floor. But if the place allows, the boxes can be mounted and side from the bed. This option is more suitable for the children's room.
Sometimes the tabletop is constructed over the boxes, on which you can put a small lamp, books.
Drawing of a bed with drawers.
To make a bed with drawers, you need to prepare such materials and tools:
- Wooden boards for frame frame and drawers;
- DSP plates for flooring under the mattress;
- Faner for frying the frame, for the bottom of future boxes;
- wooden bar;
- beams and wooden racks for a frame of bed;
- Drill and screwdriver for assembly;
- electrolovik;
- Metal ruler, simple pencil;
- a hammer;
- Furniture nails, screws, auto tapes;
- roulette;
- crosshead screwdriver;
- construction stapler;
- Special upholstery fabric;
- handles for drawers;
- Guides, rollers for drawers.
Article on the topic: How to repair a castle of plastic door
Single bed assembly
Retractable drawer assembly scheme.
Before you start assembling the bed, you need to make a scheme. First, the place is determined under the installation of the bed, dimensions are selected. After that, a sketch is drawn up, which will show the location of drawers.
If the bed with boxes will have a podium, then it is necessary to envisage so that it fits most closely to the floor, there was no lever, cracks. Part of the plinth behind the bed must be removed if the design will fit tightly to the wall. The bed should not interfere with the rest of the situation, it should be convenient to use. Next on the floor surface, the markup is performed, the wooden bar is strengthened around the perimeter, which is attached by self-draws. Vertical racks are recorded on the frame, which are approximately 50 mm lower than the future top of the bed. Such racks should be fixed so that the step between them is up to 40 cm. This will give the entire structure the necessary rigidity.
In the racks are mounted transverse beams. If the bed is adjacent to the wall, then the beams are additionally fixed with dowels. They themselves are mounted in such a way that the boxes are fluently put forward. Next, the bed with drawers is sewn plywood, sheets are reproduced with an electric bike. After cutting the edge, it is necessary to treat a grinding machine so that burrs and irregularities remain. After the frame is ready, it is necessary to check its strength. The future single bed must withstand the necessary loads, do not fumble, be stable.
Montage of bed boxes
Drawing of a baby podium bed.
You must first install a wooden bar on the perimeter of the podium. For mounting from above, boards are used, the thickness of them is 22 mm. Such boards protrude as outdoor panels, a transverse layer for the bed. For internal parts, it is better not to use a board, but chipboard sheets.
The frame assembly to be used to install the mattress is performed first from the installation of bars 47 * 27 mm. They are mounted in a horizontal position. Top on them are already put by special support bars. When installing, it is necessary to consider that the load should be distributed evenly. 2 Brousa must be put along the edges and 1 - in the center, it is necessary to fix them with self-draws.
Article on the topic: How to make installation installation to sewage?
For walls for pull-out drawers, it is necessary to use boards, the thickness of them is 16 mm. For the bottom, the plywood is used, the thickness of which is 10 mm. Making boxes are necessary in such a way that they fully occupy all the space under the podium, no gaps and emptiness left.
The assembly of drawers for extension is done in this way:
- First, it is necessary to collect side and rear walls, for which the glue, wooden dowels and screws are used. The lower inner edge needs to make special grooves with a thickness of the bottom plywood thickness. Duties do not fully, but so that the bottom does not fall out when used. If there is no possibility to choose such grooves, then the bottom can be simply to nail to the walls and the rear with the help of furniture nails, additionally strengthen screws.
- After that, the facades are attached to which the handles for opening boxes are screwed along the outside.
- If you are used to move to move, it is necessary to immediately strengthen one part of them on the side walls of the boxes, and the second - on the inside of the podium frame.
- After assembly, you need to check the reliability of all fixings.
Retractable system
Double bed assembly circuit with drawers.
Retractable drawers for the future bed require the creation of a special system. To do this, you can use guide and furniture rollers. Guides are attached to the inner sides of the podium of the bed, they will allow the boxes to move smoothly and not shift around. Rollers need to choose this type so that they do not scratch the floor covering. There are a number of such structures, most often they have rubber coating, but you can find special plastic, which will differ in durability and high levels of strength. It is necessary to provide for the presence of such a system at the planning stage, it will make it possible to make the bed to be more convenient.
Article on the topic: Beautiful wet wallpapers: photos and 8 benefits
When work on the construction of the design of the bed is over, you can decorate it along the outside with a special furniture upholstery fabric. It is done quite simple. The fabric itself is attached to the surface with the help of a bracket, cuts should be hidden inside, having previously treated overlock so that they do not appear. During the stretch, the folds and bubbles do not remain on the surface, such work is best to perform together.
A bed that has retractable boxes is different not only to attractiveness, but also functionality. Boxes are installed downstairs, they are literally embedded in the podium, outside are completely invisible. If necessary, they are put forward, the bed linen can be folded in them, pillows, and so on, then push into place. Make your own hands a single bed is not as difficult, you only need to make a sketch, as it will look, and drawing with the assembly scheme.