The washing machine helps us maintain clean, but sometimes it happens that she herself begins to clean. Permanent contact with dirty things, household chemicals and tap water of dubious quality leads to the fact that the inside of the instrument is formed. This not only harms the quality of washing, but also adversely affects the work of the washing machine. About how to clean the drum from dirt at home, read in our today's article.
Causes and types of pollution
View of pollution | Cause of appearance |
Scale | Copper may appear on the metal elements of the washing machine due to too hard water, in which magnesium and calcium salts are present in large numbers |
Remains of household chemicals | Rapid out of powder residues and air conditioning usually appears due to the fact that low-quality tools are used for washing, which are poorly dissolved in water; Another possible reason is the excess of the recommended dosage of household chemicals. |
Fat and mud deposits | If you often erase work clothes, evaporated in fat, gasoline, oil, fuel oil and other hard-drawn substances, their remnants can settle on the drum in the form of sticky, dark laid |
Funds
Each hostess decides herself what means to use for cleaning the drum from dirt. It is necessary to choose between the finished stores produced on the basis of acids and alkalis, and folk recipes, which are also preferably based on the use of these chemical compounds. The first method is faster and less laborious, and the second is more economical. The effectiveness of the folk and shopping facilities is about the same.
Article on the topic: How to attach the mixer to the wall
We list the most popular ingredients that are used to prepare cleaning mixtures at home:
- citric acid - is considered the most effective means, it is present as part of many finished cleaners;
- acetic acid - used as an analogue of citric acid;
- Food soda - more efficient in a complex with other means;
- bleach - with careful handling not only cleans well, but also eliminates the unpleasant odor;
- Copper vigor - used not so much to remove contaminants, how much to carry out antiseptic processing: it is well eliminated from the fungus and mold, which can appear inside the washer.
Cleaning methods
Clean the contamination with a whitening agent or acetic acid
It is necessary to work in gloves, and the respiratory tract is recommended to protect the medical mask. Apply a small amount of money on a shopping sponge or soft cloth and thoroughly wipe the surface of the drum. Then start the rinsing mode. In order for as little as possible, the means is settled on the insides, repeat the rinsing procedure twice.
Clean the drum with citric acid
Unlike vinegar, citric acid should not be filled into the drum, but in the receiver of the washing powder. Run the mode of the most long wash, putting into the container instead of a citric acid powder. When the washing program is completed, turn on the additional rinse.See the following video in more detail.
Get rid of dirt with food soda solution
We dilute several tablespoons of food soda with a small amount of water so that a thick cashem formed. With the help of a sponge, we rub this mixture into the drum. Leave the solution for 30 minutes - during this time it must harden. After that, a dry sponge or rags scrape the resulting crust together with mud.
Prevent the appearance of fungus and mold with a copper mold powder
First you need to prepare a solution consisting of liter boiled water and 30 grams of powder. Before you start working with a mixture, the rubber gloves. Mix the solution well, soak the sponge in it and carefully treat the entire surface of the drum. Then leave the aggregate well. 24 hours later, pour powder into the feeder and launch the washing program. After finishing it, turn on the program again, but this time without a wash.
Article on the topic: Proper storage of technology in the winter on the balcony
What else is worth cleaning?
Pollution, which we can detect on the drum of the washing machine - only an external part of what accumulates on various parts of the aggregate. In fact, a large number of garbage particles settles on the origin of the unit. To get to them, the washing machine must be disassembled. Most often, a tubular heating element, a drain filter, a sealing rubber cuff on the hatch inlet, and the pulley on which the cuff is attached is suffering from the mud.
If the contamination is not very serious, these parts can be cleaned with the help of the same means as the drum. However, in some cases, the accumulated dirt leads the part in disrepair - and then it has to be replaced. That is why it is so important to monitor the condition of the washing machine, noting the slightest changes in its work. In time, purified pollution and the prevention will help extend the life of your faithful helper.
