Modern washing machines machines work very quietly compared to the most first models that were noisy enough, especially in the press. Now the emergence of foreign sounds is considered a signal that the washing machine is not all right. If the device began to buzz when annealing, you need to immediately identify the reason. Even when the problem is non-serious, it is better to immediately eliminate it. After all, the buzz is an irritating factor that interferes with rest, and besides, it may cause concern for your neighbors.
In this article, we will tell you about why the unit suddenly begins to buzz during spinning, and how can it be fixed.
Why the machine is very noise - frequent reasons
Let us list the most common causes of the appearance of the Gula.
Foreign sounds during annealing may occur in the following cases:
- Before the start of operation of the washing machine, forgot to unscrew the bolts that must fix the tank during the transportation of the aggregate;
- worn out or was damaged by one of the bearings;
- A foreign object hit the cavity between the tank and the drum;
- Weakened the drive belt, fixed on the pulley of the drum;
- Counterweights installed on both sides of the tank are poorly fixed;
- The rubber cuff slipped from the hatch edge, or it is not suitable in size;
- Mounted errors when installing the washing machine.
What to do?
If the reason in the forgotten bolts, holding the tank, you just need to remove them. Usually these bolts fix springs on which the tank hangs. They are on the back wall of the washing machine and unscrew the wrench without any problems.
If the case is in a worn bearing, you should replace this item together with the gland. To remove the bearing, you need to disassemble the washing machine, pull out the tank and remove the drum. To do this, read the article about how to replace the bearing in the washing machine, or see video equipment to replace it.
Article on the topic: Septic tank: principle of operation, installation, maintenance
If foreign objects have fallen inside the device, it is necessary to extract them so that they do not damage the mechanism. To do this, the washer will also have to disassemble to examine the tank and remove the interference.
If the reason in the pulley is a drum, it is required to examine its fastening and integrity of the strap. The fastening can relax, and the drive belt is to break as a result of long-term operation of the unit. Instead of the wear belt, it should be purchased a new one, and a weakened pulley fastening is to tighten with tightening tools.
If it is in contrast, this problem is easy to fix. The counterweight is needed in order to insert the washing machine less vibrated. If these structural elements are faulty, vibrations are enhanced, resulting in a hum. The most common breakdown, which happens with the balances is to weaken fasteners. As in the previous case, the fastening fasteners you just need to tighten.
If a rubber cuff is to blame, it will be more expedient to replace it. However, there is a "people's" method of solving this problem. This is done using a piece of sandpaper, which is placed between the sealing cuff and the front panel. Then the washing mode is started with an empty drum. After that, you just need to extract the sandpaper and clean the drum from rubber pieces and sandpaper. It is believed that in this way you can quickly align the poor-quality cuff.
If you decide to replace the cuff, see the following video, how to do it right.
If it is not in the breakdown, but in an incorrectly connected washing machine, you need to dismantle all connections and connect everything again, in accuracy by following the user manual. If you doubt that you can easily connect to sewage and tap pipes, it is better to entrust this work to a professional.
Prevention
By eliminating the cause of the buzz during annealing, you need to do so that extraneous noises appear again.
Article on the topic: Baths for two - unity of feelings
To do this, try to follow ordinary tips:
- Do not overload the washing machine. Load in the drum so many kilograms of linen, as long as this model is calculated, but not more.
- Do not erase too often, let's relax your assistant. Specialists advise to launch the washer at no more than once a day - for the day she will have time to succeed and "relax."
- Try to wash more often at the highest temperature and with the highest number of revolutions.
- Do not forget to periodically clean the drain filter.
- Each time, before loading underwear in the drum, check whether small items were lost in pockets or in the folds.
Arrange the periodic prevention of scale formation and lime plates. How to carry out such prevention, look in the Ukrainian program "All Bood Good".