When the air conditioner is operating on the units of the outer and external block, water is condensed, which is removed through drainage holes. Let's wonder how to make condensate removal from air conditioning in the sewer.
For the air conditioner, it is necessary to install condensate removal.
Pros and disadvantages of condensate
There are 4 ways to assign the resulting water:- Conclusion to the street is cheap and simple, but flowing water with wind gusts can fall on the glass, walls and equipment of the neighbors. In some cities, there is a formal ban on such a way of condensate lead.
- The output to the tank is a more aesthetic option requiring regular maintenance.
- Condensate removal in sewage sewage. The most preferred option that has a substantial limit - samoter condensate is discharged, if it is possible to pave drainage pipes with a slope of at least 2, and better - in 3 degrees.
- Forced drainage of condensate from air conditioning in the sewer. If the location of windows and doors makes it impossible to lay the pipes under the desired slope, apply a special pump that takes water under pressure.
Consider the peculiarities of the water lead in the sewer.
Applied materials
The location of air conditioners and the device for the condensate removal.
Connecting the air conditioner drainage to sewage may require materials:
- Polypropylene tubes for condensate drain, with a diameter of 20-25 mm;
- Drainage hoses - are a flexible corrugated pipe with a diameter of 16 or 20 mm;
- Drainage siphon - can be replaced by a simple bending of the hose forming the hydroplays;
- adapters;
- seals;
- Thermal insulation - prevents the formation of condensate on the surface of the tap tube;
- Clamp connecting - eliminates the possibility of leakage at the junction of the drain pipe of the block with a drainage pipe;
- The fastener clamp for pipes - avoids the strain of the pipe, it is recommended to be installed through each meter;
- POMP - applied when it is impossible to lead condensate with gravity.
Article on the topic: Lightning protection of a metal roof with their own hands
Purchase of materials should be performed on the calculations made on the basis of a circuit on which condensate is removed from the air conditioner to domestic sewer.
Organization of removal of condensate air conditioning in the sewer
Proper location of pipes for condensate.
To organize a leading of water from an external block, a hole must be drilled in the wall. This hole should be well protected from moisture and wind. With incorrect installation of drainage hoses, moisture with a tap tube can beware with the outside of the wall of the house.
In the walls of the room, they make shoes and put the pipes in them, according to which the condensate is given from the air conditioner into the sewer. When merging into one line of taps from several air conditioners, it may be necessary to increase the diameter of the drainage hoses.
Additional protection ensures the insulation of the route with a corrugated pipe or vinyl tape.
The withdrawal of the air conditioner into the sewer can be performed in the sink drain or in the pipe leading to the riser. The use of a hydraulic wet created by bending a hose is not recommended if the air conditioner works irregularly. Water in the pipe will disappear and will not stop the spread of smells of sewage to the apartment. We recommend not save and purchase a full-fledged drainage siphon with a check valve.
The use of POMP also has its drawbacks: creates additional noises, requires preventive maintenance, and sometimes emergency repair pumps.
After connecting all the systems, we carry out a trial reset of water into the drainage baths of the air conditioner. After checking the tightness of all the joints, embarking the stroke.
Properly organized drainage from air conditioners in the sewer will effectively protect against the flow, will not allow the appearance of foreign odors indoors, does not require frequent and expensive service.