Additionally, heating the house will help you with a warm floor, which can be installed under the linoleum system "Warm floor", which is quite recently available only to units, is now gaining more and more popularity. By providing your apartment with such a device, you can walk barefoot on the floor even in the coldest winter days. Many people think that not all finishing materials can be combined with a warm floor, a linoleum is considered to be particularly inappropriate for such a tandem. However, if you take into account all the nuances of choosing and installing such a design, you can equip a warm floor under linoleum with your own hands.
Linoleum selection under film warm floor
Linoleum is very cheap, but according to the popular material. However, its low cost suggests that it is far behind the new materials, according to its technological characteristics.
To determine whether this type of linoleum can be used in combination with a warm floor, you can consult with the consultant's seller, or watch pictograms on the package.
Very often, unscrupulous producers are added to the composition of the linoleum, harmful substances. Because of this, when heated from such a material, hazardous compounds are started. In order not to become a victim of deception, always before buying a linoleum require a certificate of quality from the seller, and also make sure that this type of material is suitable for use in combination with a warm floor.
When choosing a linoleum under a film warm floor, you need to take into account its quality and main characteristics.
Types of linoleum and their interaction with warm floors:
- Linoleum from rubber is perhaps one of the cheapest views. They have a not very aesthetic appearance and low quality indicators, which is rarely used for finishing houses and apartments. However, laying on a warm floor of such a material is quite possible.
- PVC Linoleum is also inexpensive and looks good in the interior of the apartment. When heated above 28 degrees of heat, it begins to highlight harmful compounds, so it is absolutely unsuitable for installation along with a warm floor.
- Single-layer linoleum thin and short-lived material. It, of course, can be kept on a warm floor, but it requires frequent replacement.
- Warmed linoleum is a high-quality thick material with low thermal conductivity. However, it can only be put on that room where there is no system with a warm floor.
- The glyphthale linoleum is covered with a thick layer of varnish. He meets all modern technological requirements. This is the perfect option for laying a warm floor.
Article on the topic: Unexpected use of familiar items
In addition to the above-mentioned linoleum qualities, you need to pay attention to what the reverse side of the material is made. If its outcoming layer consists of a fabric, then for a warm floor, such a linoleum is not suitable.
Infrared warm floor under linoleum
Most recently, the system of the warm floor demanded a long and time-consuming installation, in the process of which had to deal with concrete works. However, now, when the construction industry is rapidly developing, there are simpler and convenient options.
Infrared film warm floor is a modern material, which in appearance resembles a black thick plate, it is perfectly bent and has a small weight. According to some parameters, such a film is inferior to more traditional types of heated floor, but she also has the benefits.
Quite popular today is infrared warm floor under linoleum
The advantages of infrared warm floor:
- The cost of all elements of such a design is lower than, for example, aqueous warm floor.
- Installation of film warm floor is so simple that you can cope with it on your own.
- Such a system is not afraid of frosts and can not crack and flood the premises under it.
- When such a device is turned on, the floor heats up instantly. At the same time, only objects in contact with the floor are heated, and the air does not lose moisture.
- Warm floor film can be put only in those places, he is heated. Thus, you save the material.
The list of advantages in infrared is quite large. However, so far, unfortunately, such tape heating is difficult to call the perfect. It has enough weighty shortcomings.
Disadvantages of warm floor on film based:
- The ability to defeat the current of people walking along it. And although this probability is very small, because the device is well grounded, such cases have ever been.
- Big energy costs. Maintenance of such a system is several times more expensive than heating the floor with an aqueous device.
- Dependence on the availability of electricity. When the electricity is disconnected, floor heating stops instantly.
Article on the topic: How best to issue a working area in the kitchen
As you can see, the disadvantages of infrared warm floor are also available. If they seem too significant. Then you can choose another system, but each view has its drawbacks.
Electric warm floor under linoleum
Electric cable floor can be cable based on. In the first case, the design is simply a wire, and in the second - a grid heated in the form of a wire.
Quickly and easily make the room warm by electric floor
The electric floor on the ground is easier to install, but the pros and cons at both options are the same. This type of warm floor has characteristics similar to the infrared system, however, there are some differences.
Make such a floor, you can even do not even have special equipment. You do not even need to imagine it into the screed, if the tile will be used as a finishing material, but the concrete base is used under the linoleum and laminate, it will have to be installed.
By choosing such a system for your home, you can safely move furniture, which is a certain advantage. However, the amount of energy consumed is still very large in such a system, so it is not worth using it as the main source of heating.
Water heated floor under linoleum
Water warm floor is more suitable for heating private houses as it is necessary for such a system. However, new multi-storey houses already have all the necessary equipment for installing such a system.
If you install such a floor in an apartment without consent with neighbors and with utilities, then you may have problems with the law.
For heating of private houses, many experts recommend using aquatic warm floor
The following factors are the disadvantages of such a system in front of electric warm floors: mandatory fill with a screed, labor complexity, high cost of materials, the possibility of installation is not in all rooms. Another disadvantage of all warm floors is that it is impossible to continuously walk on them, otherwise you may have diseases associated with vessels.
Article on the topic: Assembly and installation of lighting shield
The advantages of the warm floor include the fact that it saves electricity, does not radiate harmful electrical and electromagnetic waves, and is also able to cope with the heating of the room without additional devices.
Laying of a warm floor under linoleum
After you have decided on the type of floor heating, you can go directly to its installation. We will look at how to put the infrared floor on a film based. This system is the easiest way to do, and by that, you will definitely cope with it.
Warm flooring under linoleum is quite independently possible, the main thing is to familiarize yourself with all the nuances of this process in advance.
Instructions, how to lay a film warm floor:
- The preparatory stage includes floor alignment using a screed or cement plaster (it depends on how uneven base is).
- The waterproofing protection is glued on the lean floor. It can be a film, or bitumen glue (mastic).
- The waterproofing film is sewn with plywood or chipboard sheets.
- Now you can create a diagram on which the thermal film will be placed. Its not needed to lay a solid line. Places where sofas and cabinets will be better left without heating.
- A thermal insulation material having a layer of reflective aluminum foil is stacked on top of the plywood base. To bind over thermal insulation sheets, use tape and construction stapler.
- Now, according to the previously composed scheme, infrared film is stacked. At the same time, it should lie down the lower side on the thermal film. Warm floor cloths are fastening with a scotch.
- Next, the place of the cut of a wide copper tire is covered with bitumen insulation. Where the film will be connected to the wires, copper clamps are installed. And the whole design is connected according to the manufacturer's instructions.
Before collecting a warm floor, be sure to check out the instructions on the package. You also need to consult with electricians about whether your wiring is able to withstand the load of such a system.
Installation of infrared warm floor under linoleum (video)
Warm floor is an excellent way of additional heating of the room. It can be used even in a tandem with linoleum. Use such a system in your home, and let you always be warm!