[Saving] How to make a suspended chair yourself?

The hanging chair appeared not so long ago. For this short time it deserves a good reputation. It is pleasant to relax and relax under light shocking.

The cost of hanging chairs is high enough, despite the simplicity of installation and creation. Initially, they were made of rattan or vines. These materials are characterized by high strength and ease. They perfectly complement the household plot or a living room in rustic or natural styles. Plastic chairs or acrylic are tougher and hide for rooms in the style of minimalism, loft, high-tech.

In order for the chair to be comfortable and comfortable to complement it with pillows or a small mattress, for a softer location.

It is not necessary to buy an expensive item when it can be done quite easily. There is a lot of options, but it is worth considering the two main ways to independently manufacture a chair.

Braided Hammock Chair

It is not difficult to assemble it, it is enough to master the basic skills of weaving Macrame. To assemble such an element of furniture.

1. Two metal hoops for the frame with a cross section of 3.5 cm. One of them will be used as a seat, the second as a back. Approximate diameters of the hoop 70 and 110 cm;
2. Cord for weaving - 1 km;
3. Slings - 12 m;
4. Fat cord for connecting rings frame;
5. 2 rods, preferably wooden;
6. Scissors;
7. Roulette.

Sequencing:

1. Winding hoop. The metal hoop must fully be covered with a cord, for this, it is turned on the helix tightly pulling. Every 10 cm, the grip is enhanced. Approximately one meter of base takes 40 m cord. While working it is better to put on gloves to protect your hands from calluses;

1. Mesh weaving. You can use any weaving method, but the simplest is chess. He can master it in a short time.

Article on the topic: 4 bedrooms and 6 baths: Stephen's house Sigala for 3.5 million dollars

From how tight weaving will be the elasticity of the finished product. If possible, you need to pull the cord as much as possible;

1. Build construction. Hoops are going to heap and attach to the cord to each other. On the other hand, two rods are fixed intended for the backrest support.

Hoops can slip, so small peeled rods are made on the end;

1. Background design. The grid on the back is shovel in the same way as the previous grid. Start on top and gradually descend to the bottom. The ends of the threads are fixed to the frame.

Chair is ready. It will only be left to decorate with its brushes or other decor if necessary, fill with pillows and hang in the right place.

Chair with Czech

If the option with weaving is not suitable, you can make an armchair from solid matter. To do this, prepare:

1. Metal hoop with a diameter of 90-100 cm;
2. Durable 3M Matter by 1.5 m;
3. Heaters - Flizelin or Dublerin;
4. 4 metal buckles;
5. 8 m sling;
6. Hanging ring;
7. Sewing machine;
8. Scissors, threads, needles.

When all materials are prepared, you can start assembling:

1. Cutting covers. Two equal squares are cut out of dense tissue and fold them separately two times to form smaller squares. Circles cut out, taking a cut slicer with a pencil;

1. The resulting circles are folded fourly and tapping fabric to form the lines of the hall. They are cut on two rectangular 10x15 cm rectangular holes.

So that the slits were the same, the matter fasten the pins to fix it in the same position;

1. Circles are stitched together, leaving only the place to insert the hoop. The case is turned off to the wrong and move;

1. The metal frame is coated with insulation and insert it into a prepared cover, which is filled with insulation. Edges are put up;

1. Four cut slices of slings 2 m each, pre-silent their ends;

Article on the topic: 5 "Golden" Rules for repairing children's kid to grow happy

1. The slings are inwarded in the slits and stitch them several times. All the ends of the sling are stitching together on the metal ring, for which the chair will be attached to the base.

Such a chair will decorate the veranda, garden, gazebos or bedrooms in ecostel and no matter how it will be done. The main thing is to fix it tightly so that the chair extended human weight.

Hammock Chair made of metal hoop - Successful project - Inter (1 video)

Suspended chair with your own hands (14 photos)