The entire design of the manual motocos is not too complicated, and reminds the device of other objects of garden equipment, which are used in the economy. Motokos consists of a gasoline carburetor engine, a manual starter and air cooling system.
This is a relatively easy and compact device conveniently for use in a private area if it is necessary to bring the land in order. The advantages of this type of device is not only not too high, but also an affordable price.
For example, you can buy an inexpensive, but high-quality model of motocos you can at http://zakazik.ua/products/motokosy.html. Here you will find a large selection of garden equipment that will allow you to keep your site in order.
Unfortunately, both comfortable and practical things like motocos, from time to time is required. As a rule, the owners are rarely addressed to the service center, resorting to independent repairs.
If you are sure your repair of motocos do with your own hands will bring more benefit, rather than harm, boldly fight for business. The simplicity of design allows the repair of the device in a short time.
How to make repair motocos yourself?
It is worth saying that there are several categories of breakdowns, depending on the complexity of which you can decide whether to contact you in the service center.
Small repair is definitely available for self-elimination. But if the engine broke, and you are not too versed in the electrician and mechanics, it is better to trust this business to the master, otherwise you risks forever break your braid.
Problems that may arise with a carburetor or engine:
- The carburetor failed;
- jinned engine;
- Reduced compression in the engine.
If such problems have already met and were successfully eliminated, boldly try to work. If the listed breakdowns are not clear for you, give the motorcycle to the repair of specialists.
You can independently replace the toggle switch if it started to function with interruptions or add. To do this, you will need a soldering iron, a new toggle switch and rosin. Just solder a new switch, an old one.
Article on the topic: How to sew a lambrene with your own hands: Secrets and work scheme
Broken rod motocos you can climb and strengthen with metal brackets or wooden plates.
The deformation of knives, especially plastic, during operation motocos says that when buying you did not know how to choose the correctness of the trimmer to give and purchased a model, not enough for the type of plants that she met on your site.
Better immediately as soon as you noticed that the knives were brought out or broke, replace them with a stronger, for example, stainless steel. You can pull them out of metal sheets using the machine, and to the spit itself, such knives are attached with the hill and washers.
It is worth remembering that motocos, like any other device, requires periodic prophylaxis, in particular, replacing lubrication. Motional lubrication is used technical. The device itself is easy to disassemble and lubricate. It is better if you will produce prophylactic lubrication of your mower at least once a year.
Finally, another common breakdown is the drop in the wire limiter from the head. In this case, to attach it back, use a metal wire.
In general, it is worth remembering that the safety and long service life of your garden tools depends not on the frequency of their use, but from the correct content and maintenance. In one case, motocos are no exception.
Proper maintenance of motocos
As already mentioned, it is important to change the lubricant motocos on time. If during operation you started feeling unusual vibration of the device, this is a signal that the lubricant is over. In addition, you need to know:
- You need to inspect the fuel filter in time and to replace it if it clogged.
- Air filter Motocos should be clean before work, without sawdust and herbs in the grid.
- If necessary, it is recommended to clean the muffler from Nagar, it will extend the operation of the device.
- The engine is very quickly wear out if the device is bad cutting discs. Motional discs must be pulled out periodically, in accordance with the attached instructions.
- You must always work the motocosa, which has a protective casing. His absence can be dangerous for both you and others. In addition, motocos without casing quickly flashes the engine due to overload.
Article on the topic: Liquid plaster for internal and external works
Make sure that the inventory is always clean. "Shuba" from dirt on the surface of motocos can lead to a variety of problems. In particular, in this case, the engine does not have the ability to cool normally, overheats and wear out at times faster. In addition, motocos with clogged filters requires significantly more fuel than clean.