The junction of the tile to the laminate looks good, but it is possible only if the tile is black, white, beige or serayan there is a large number of solutions for the design of the floor covering. This is especially true for a combination of tiles and laminate, which allow you to organize several sections in one place immediately and take into account their functionality. For example, in the kitchen, the tile is most often placed in the part where the washing is located, and the part of the laminate is located in the dining area. The main issue of those who are engaged in the installation of several floor coatings on one area remains the correctness of the docking of the laminate and tiles.
Docking laminate and tiles: 5 positive sides
Despite the fact that such materials like tile and laminate seem incompatible, many people practice this idea for a long time.
The jokes between tiles and laminate - one of the most common tasks in the design of the floor
It should be considered 5 main advantages of such design:
- Allows you to visually increase the room;
- Creates a unique pattern on the floor;
- Small financial estates;
- Long service life;
- Allows you to divide the room to certain zones.
So, for example, the installation of the tile at the plate or washing in the kitchen will make it possible to wash the territory from any contamination, and the laminate is located at the dining table, will make the place pleasant and warm. Such an organization can combine several zones in the hallway. And the pitching of such materials as a tile and parquet between the living room and the corridor is simply necessary to "close" the territory from the dirt. If you still doubt the aesthetics of this combination, then appreciate the ready-made options in the photo.
Article on the topic: Application of glass winds in the bathroom, practical interior
At the moment, you can find a large number of docking options that match the materials. They may differ not only by their aesthetic properties, but price and difficulties in the installation. It should be considered more detailed to consider popular works on docking laminate and tiles. Work may not require special skills, but accuracy and patience is obligatory.
How to dock tiles and laminate without a freege: stages of work
Ceramic tiles and laminate can be connected to the jack. This surface should be smooth when connected, the threshings should be excluded and done by level.
When a high-quality docking of tiles and laminate without thresholds is required, it is necessary to lay the materials with compliance with technology
Such an organization has a number of benefits:
- The surface eliminates the protrusions;
- The junction can be given absolutely any geometric shape;
- Such an organization has aesthetic species.
Drops with such work are undesirable. In case the surface of the multi-level, you need to use a special substrate and solutions that compensate for the height.
As for the work, it is performed as follows:
- The extreme row of tiles is stacked in such a way that it will perform in the line of docking;
- Laminate boards are set to ceramic tiles, so that the edges go beyond the borders of the docking;
- The seam line marking is carried out using card templates or suspensions;
- With the help of a grinder or diamond disk, unnecessary parts are cut from the material, while the actions must be neat so as to prevent cracks or chips;
- Laminate and tiles need to be cleaned of dust;
- All materials together with the substrate are installed in place, edges, if necessary, are planned with sandpaper;
- Then, the joints between tiles and laminate need to be selected by a selected material. It can be a mastic or grout for seams.
In the process of installing the last boards of laminate, you need to ensure that the seam width is not more than 1mm. Fill the last gap grout or paste care for laminate and tiles.
Article on the topic: how to stick a photo wallpaper on your own hands
Transition from tile to laminate: methods of organization
Organize the transition at one level is very difficult and such an operation needs a thorough approach. There are several ways to create transitions from laminate to ceramic tiles.
Floor flooring with laminated board and tile at the same time solves practical and design tasks
Of the mains, you can allocate:
- Docking with fitting materials;
- Application of thresholds;
- Molding junction;
- Connection without the use of thresholds;
- Using a cork compensator.
If you do not use additional materials to arrange an accurate fit, then the styling will become more severe and painstaking. As for fitting, it should not be too dense, since the tile and laminate have different properties, and at different temperatures can expand. At the end, if the fit will be done tightly, the swift of the seam or the material itself may occur.
To prevent the material defect, it is necessary to leave a small gap between them, which is subsequently filled with a fugue.
Fugue, this is the connector that, after combining, it is necessary to adjust and clean the sandpaper. So that the adjoining was performed correctly, we recommend to get acquainted with the video. As for the faces of the seam, they need to be treated until they stop felt.
This separation is the most budget, however, not effective. Many experts argue that despite the fact that the costs of acquiring smaller, the subsequent costs will be much more. In addition, there is the possibility of spreading mold.
Connection of tiles and laminate: we use the mounting foam, sealant and silicone
There is another way to combine laminate and ceramic tiles. This is the use of construction foam, sealant or silicone during the docking process. Thanks to the use of these materials, you can get accurate and practically inconspicuous seams.
The joke may occur between tiles and laminate laminated in adjacent rooms or within one
Article on the topic: The roof of the filtered materials
For example, silicone can be selected under the color of the tile, which will improve the aesthetic look. The main drawback of this method is that, if necessary, dismantle the joints will not work and have to disassemble the entire floor or wall. In addition, the use of foam and sealant requires certain skills and accuracy. Be sure to consider the correct amount of material so as not to use too much.
Such a mount is considered the most reliable, as well as aesthetic when connected.
A cork compensator is considered a more advanced way. This connector can combine any profile, guarantees reliability at the joints of the tile from porcelain stoneware, linoleum or laminate, as well as eliminates the deformation of the material due to the integral filling of the gaps. Cork compensator at the moment is the best replacement of the thresholds, such a plank can fill the gaps of any width, and length. If it is necessary to obtain a certain color use tinting. It does not need a certain care, which also gives material an advantage.
The only drawback that has a cork fit, is a demandingness to an exact fit in height and form. The use of this material is impossible, even if deviations are minimal.
How to connect tile and laminate (video)
As you can see from the article, creating jacks of tiles and laminate, the case is very troublesome and occupies enough time. That is why it is necessary to prepare for business in advance, consider all the nuances and understand whether it is for you. If not, then experts will always be happy to help and organize a magnificent floor with a unique design according to your requirements.Examples: how to connect a laminate tile (photo in the interior)
