The tank board may differ in width, thickness and type of wood, from which it is made of wooden floors. Not when they do not leave fashion. After all, such a finish looks natural and noble. In addition, the tree is an eco-friendly and natural product that does not allocate harmful connections. There are several options for wood design. You can choose a parquet, or a parquet board, but. Perhaps the most unusual type of finish is a t-shirt. What is this material, and for which it is used - read further.
What is a tie board
The tipped board is made of wood. In such an element, on the one hand, there is a centimeter groove, and on the other spike is the same length. They received their name, just due to the presence of such a key system, because the grooves are differently called the spool.
Bowed styling is a monolithic seamless design. The floors decorated in such material will eventually begin to creak and fall apart.
Among the advantages of the headboard should be noted a long service life, a small price and an excellent appearance
Fixtures for scribs of boards (spike and spool) are made on the milling machine. Only under the condition that these two elements will have accurate dimensions, the boards are firmly connected to each other.
The punching board can be made of different tree species. The material of such a product is selected depending on what it will be used.
Types of headboards:
- The cheapest option is pine tongs. They are not very durable and fear moisture, so they must be opened with several layers of varnish.
- The tongue from larch is not afraid of moisture, but it is twice as expensive than pine boards. This material is longer and unattractive for insects.
- Oak and ash board is the most expensive and beautiful material. Floors from trees such breeds look noble and aristocratic. High cost pays for strength and long service life.
In the construction markets you can purchase tight boards of all existing species. First of all, when choosing a material, pay attention to its humidity. Wood floor board must be saturated with liquid, no more than 10%.
There are standard sizes for circulated boards. Their length can vary in the range of 100 - 500 cm, the thickness is 2.5-3.5 cm, and the width is 8.5-10 cm.
Advantages and disadvantages of the floorboard for the floor
Wooden tipped boards have a lot of advantages. Of course, their features may vary depending on the variety and wood breed from which they are made.
Article on the topic: Interiors of American apartments: Acquaintance with how they live in America (42 photos)
Screenboard can be considered or painted in any color.
Advantages of headboards:
- Spike-groove fasteners ensures uniform load distribution throughout the floor. Such a monolithic connection increases the service life of the floor covering.
- This type of boards is made in such a way that the air can freely penetrate through the boards. Thus, the mold and mold will not begin on the floor.
- Bloodboards are an environmentally friendly material that meets all European quality standards.
- Increased thermal insulation and noise insulation - additional advantages of such boards.
- Installation of tipped boards, thanks to the mounting system, so simple that any newcomer can cope with it.
- A seamless design of tankboards is perfectly in many interior styles. Especially successfully looks like such a coating in the premises made in the style of Loft.
- In the case of surface damage to the floor from wooden massive boards, it is easy to return an attractive appearance, rebuilding it alone and start it with a new layer of varnish.
All these advantages make a tipped board with excellent material for installation in a private house or apartment sucyss. However, such a coating has some drawbacks that can affect your choice.
Disadfined boards:
- The tree is an expensive natural material, so the headboard will cost more than the majority of other floor coverings. The price of such material will pay off due to its strength and long service life.
- The whipped board is afraid of moisture, so it will be possible to cover the new layer of varnish or oil-wax mixture.
- The quality and duration of the service life of your floor covering depends on the selection of wood.
As you can see the shortcomings, such a coating is not so much. If you are satisfied with the high price of a tongue board, then you can safely acquire.
Options for using a genderboard board
Bounded boards due to their high prices are not used very often. However, apartments decorated with this noble material look very bright and original.
The tank board is perfectly suitable as an outdoor coating for the terrace
The first version of the use of a headboard is a black floor finish. In this case, on top on the boards, it is necessary to lower the decorative coating. For laying on the draft floor, you can use boards from the pine mass, they are not raw and cheaper than all other woods.
Best of all pinned boards look in spacious premises with environmental or concise styles of interiors who prefer simple forms. Especially successfully such a finish will fit into the Loft styles, modern and eco.
Another way to use tie boards is the facial floor finish. Such a designer stroke looks great in most interiors. For trimming facial surfaces, boards from larch, oak or ash. Such trees breed are stronger, moreover, they look much noble for pine materials.
Article on the topic: Bathroom sink - 105 Photo of the best new products from the catalog
Pine boards harmoniously look in combination with wallpaper of muted colors. Also, if you want to make a gender coating more original, you can handle it with a verse of any color. Such a reception will provide sex covering additional protection.
What reason can you retard sex sheets
The headboard can be laid almost on any base. So that such a coating light up as long as possible, the floor surface should be prepared. Make extra thermal insulation and waterproofing.
Poland can be treated almost on any base, for example, on lags
What grounds can be laid tipped boards with your own hands:
- Screen boards can be laid on a concrete base. If there are pronounced irregularities on such a surface, it must be pouring it a new layer of screed.
- You can also mount this design to lags. Lags are attached to the base with self-draws, dowels or glue.
- If you decide to use tipped boards, like a facial finish, you can sash the Fan. Plywood is attached to the base with glue or self-drawing.
- Old wooden floor can also be bored with a circulating board. The main thing is that all his elements were whole and firmly held on the basis.
Whatever reason you have used, you need to take care of additional floor insulation. First, the waterproofing film is stacked on the draft floor, then the insulation, for example, glass gamble, the film is recently laid again. Only after all layers are in their place, you can use the spanled board itself.
Laying of the floor from a t-shirt on a concrete base
First of all, to put the boards on the concrete, it is necessary to carry out some preparatory work. You can align the base in two ways: using a self-leveling screed or using a metal spatula and cement-sand.
Under the tipped board, the insulation is not necessary. However, using such an upgrade, you will get a warm floor.
Before laying a tipped board, it is necessary to align the floor and clean it thoroughly
Next, you must select the insulation and waterproofing film. What materials are better, to say difficult. One thing is clear that the ideal option is the natural insulation and durable polyethylene film. You can also use waterproofing soil.
Build a warm floor on a concrete base with your own hands:
- A plywood or chipboard is attached to the concrete base. The distance at which the edge edge should be, is 1.5 cm. Honey plywood sheets also leave a gap. It must be 2 mm. To attach this layer, you will need self-tapping screws that are taken into the tree.
- The floor sizes are recognized. Boards are cut off on them, for this, a special device is used, for example, an electrolovka or hacksaw.
- Scuffed boards are attached to the plywood. The first element must be put in spike to the wall, and a round groove from it. To pull the boards use self-tapping screws or nails. Such tightening should be reproduced at an angle of 45-50 degrees, with a step of 30 cm.
- After all the boards are laid, the gaps between the walls and the floor are put on and decorated with a plinth.
Article on the topic: File floors 3D do it yourself (photo)
This is the easiest option of laying a spanned board. With this installation, it is quite possible to cope. Mounting boards to plywood easily and quickly, but more often use the rallying of elements with lags.
More complex styling of the headboard with their own hands on lags
Lags are thick wooden bars, which are installed on the aligned concrete floor. They are stacked with a step of 30-60 cm. They need to lay a sound insulation substrate.
On top of the ridge, lag needs to put moisture-resistant faeer. The requirements for its thickness are quite rigid, the material thinner is 1.8 mm not suitable.
You can attach a tipped board to lags with a screwdriver and screws
Attaching boards to lags:
- The first board is put on the crest to the wall at a distance of 1 cm. Its fasteners are made using self-tapping screws or nails, while the first board is correctly fixed across the entire width.
- Next, install three boards. In this case, the comb of each next board is needed at an angle to insert the previous element in the groove. For a better connection, the boards are closed with a rubber hammer.
- You can pull the boards using a jack. Come to the last lag of Bruks, the screw jack will be dried in them. Install the second beam on the rib board. Install the jack so that it rests on and in the bar on the lag, and in the bar on the board. So you can firmly connect the boards.
Next you need to cover all the remaining space. At the same time, each fourth board is screwed to the floor with self-draws. The latest boards are tightened with wedges resting in the wall.
How to make a tipped board with your own hands
To separate your house with tipped boards, it is not necessary to buy a ready-made material. Folded board may well be done with your own hands. To do this, you will need a manual fuganok and a milling machine, as well as, any edged tool, as well as dry boards.If you failed to pick up high-quality, well dried material, it means you have to dry it yourself. However, this stage will take quite a lot of time.
Laying the headboards with their own hands (video)
Screwed boards are made as follows: the material is fixed with clamps, the markup is applied to it, and the spike and the comb from different sides of the board are cut onto the markup.
The punch board is an excellent alternative to a piece parquet. It also looks luxurious, but it is easier to install it with your own hands.
Details: Flooring board (photo examples)
