To eliminate the creaking of the floor during walking is quite independently, if we competently approach the solution of this problem, wooden floors people have been used for a long time. It is wood that for a long time withstands competition with many new floor finishing materials. Moreover, it should be noted that, despite the fact that modern methods for the production of finishing materials appear, it is the tree that it is chosen in order to make her housing exquisite and luxurious. It is impossible not to pay attention to the fact that the wooden floors contribute to the house. However, at a certain moment, before each wooden floor owner, a question arises, how to eliminate the creaking appeared?
How to remove the creaking of the wooden floor in the apartment: one reason out of six
Answer this question is very easy. If you start with a logical reasoning, the floor is the central part of the overall design, and sooner or later, this construction begins to shift naturally. This is exactly the cause of mechanical stresses. In addition, there are a number of reasons that affect the occurrence of squeaks.
As a rule, the wooden floor begins to creak due to improper operation or long use
Eliminate 6 main factors:
- Incorrect operation;
- High humidity indoors;
- Weakened nail compounds;
- Lack of the required distance at the walls;
- Drying material;
- Long operation time.
Wooden floors from boards are stacked by lags, which, after long-term operation, begin to break off and creak. Especially this becomes noticeable at night, when you need to go through the room quietly, but as a result, everything can be waking up. In order to correct this problem, you need to make an analysis of the reasons why creak can occur. In the basic cases, the answer to the question is hidden in the structures themselves.
Seed floor in the apartment: how to fix multiple steps
You need to start with the most radical and effective step, which will help get rid of creaks, this is a complete floor replacement. The new material will be able to carry out the task for a long time without requiring additional repairs. However, this method cannot be called budget. The full replacement of the floor cover will require from the owner not only a large amount of time, but also extra wretches for the purchase, delivery and, of course, if necessary, payment of the work of the masters. Large financial expenses will require even the most inexpensive options.
Article on the topic: Finished putty for the walls and its varieties
Get rid of the squeak in the old floor you can, if it is completely replaced with a new one
Another known method for delivering a screlet is to replace floors on the screed. From above, not such a material can be put on ceramics tiles, laminate, wooden parquet or linoleum.
This solution is more profitable, but if there are children in the house, then such an organization will need additional insulation.
Additional material as a layer can perform clayzite or foam. Materials for insulation do not relate to budget, and their operation will require a sufficient amount of time and strength.
The most inexpensive option in the fight against the creak is to update the plywood casing, which is attached to the self-tapping screw. But if the lags have a bad look, you will have to disassemble. In this situation, the coating will still need to fully remove, but even in this case it is possible that the new floor will not begin to creak.
What to do to not creaked wooden floors: tips
Experts identify several specific methods that are able to eliminate the problem of a creaking floor. It's not a simple thing, however, absolutely anyone can cope with him. The main task is to choose the desired option, which will lead to a positive result.
In order for the wooden floor to do not creak, you can use a cement solution or talc, which should be shred
Here are the main ways to eliminate the problem:
- The first thing you need to do is think not only about the problem of the screen, but also about the appearance of the material. The creak can be easily eliminated by graphite powder. It includes talc, falling asleep which in the gap can be eliminated by the creaking. You can also score wedges in the gap, if there is no result, then the boards should strengthen with screws.
- The second way is more time consuming and needs great efforts. If there are no funds for global changes, the pins will come to the rescue. In those places where the creak is distributed, the holes should be drilled at a diameter of 10 to 12 cm. The distance between the holes should be at least 30cm. Using high-quality PVA glue, pins are pressed. After the floor is cleaned - the creak will be eliminated.
- In order to eliminate the creaking on the wooden floor, the boards are attached to the lags with screws of the rounded type. They help to pull and fasten the surface without tearing it. Make a job easier can drill in which the speed control function is enabled. If the creak is not eliminated, then the holes make a diameter more and the mounting foam is suitable for fixing.
- The oldest and simple method is the elimination of a violep with a wedge. For this purpose, wedges are cut out of the desired material, lubricate with glue and ride into the holes.
- A more durable way to get rid of the screap, which in any situation gives a positive result, is the use of metal anchors. The method is most reliable, but here you will have to spend the budget and efforts. The work is that the anchor is installed in the wooden floor, resting in concrete. Under it is prepared by the outer shell, which is created from the metal. Thanks to this method, lagows are strengthened. Anchor will not be visible outside, since the holes create according to their parameters. If you follow the rules, the distance between the anchors should not exceed 1m, but experts claim, the less distance, the better.
- And the last but equally effective method is replacing the screws and nails. This method is not only reliable, but also time consuming, due to the fact that the floor passes the full modernization without dismantling. In the process of repair, each part of the floor is carefully checked, and old fasteners are replaced with new details. Of course, to exclude nails, this is the best option, as they are rust with time, causing the deformation of the floor and creak. Before making a screed, check all the boards. Embossed elements should be removed and replaced with new ones. After the work is done, you can reinstate the construction foam.
Article on the topic: How to make a lamp from LEDs with their own hands?
If you come to work competently and carefully, you can make a creaking quiet, or remove it at all, without opening, even at the oldest floor. Your finish will be quiet, as if work was done from cork material. Each of the ways of autopsy can be found in the learning video. Thanks to them, you can learn how to repair the creaking boards from the chipboard without disassembling the parquet.
Why crept floors in the apartment: final stages
It does not matter what method of combating the creak you will prefer, the final stage should include a careful study of the floor surface for the slot. They must be chosen to close the wood mastic. Make sure the reliability of the coating cannot be so that the boards be fed up, in this case they are eliminating them.
Places where repairs have been repaired. Then the floor is covered with oil, which also helps to get rid of the edge of the floor for a long time.
Additionally, the wooden floor can be seized and covered with oil, which will help get rid of annoying screens
And the last thing you need to do is visually process the floor. If it consists exclusively from the boards, then it can be covered with varnish or paint, and if there is another coating, we put it. The same applies if the floor must be pulled. Thanks to such methods, your wooden floor can get an additional service life.
Creep the floors: what to do, without disassembling (video)
What conclusion can be done on the basis of this article? The creak, which is distributed from your wooden floor, this is not a sign that it will be necessary to carry out global installation work. Thanks to the advice listed above in our article, you will be able to extend the life of your coverage without much difficulty and monetary deposits.
Article on the topic: Eliminate the creaking of the floor without opening: several ways