Hello expensive readers of the site Roostroy-Sam.com, now I will tell you how I did forced ventilation of the cellar in the garage.
Ventilation is an important element of any room with high humidity and the cellar in this list is no exception. The presence of natural ventilation must be mandatory. But what if this ventilation does not cope with its function? You need to make forced ventilation!
Tools and materials
To work, we will need:
- screwdriver;
- fan;
- the wire;
- fork;
Procedure for performing work
First of all, you need to connect the fan with wire and fork. Make it is quite simple. We clean the wire on both ends. We spin the plug and fan. We connect the wire with pin contacts and fan.
Now check if the fan works, connecting it to the power grid.
If everything is in order, you can mount the fan in the exhaust pipe. To install easily the fan diameter must match the diameter of the inner hole of the pipe.
You may also have a question: "Where to install a fan on the inflow or air outflow?". I advise you to install it on the outflow, since in this case the wet air will not fall into the garage room, and the air is cutting into the cellar, which will increase the derivation of moisture from the designs of the floor walls and the ceiling.
Article on the topic: Self-timers for cars. Preheating antifreeze in frost