If you want to build a simple, beautiful and inexpensive place to relax on the plot, then one of the most accessible options is a gazebo of polycarbonate. It is durable and durable, and even strong frosts withstands. In this article, we will look at various drawings of the gazebo of polycarbonate.
Colored walls in the gazebo
Design elements
Model construction hexagonal shape
First we will understand which elements our building will consist:
- Foundation . The walls will be very light, therefore the foundation for the gazebo will need minimal. If you want to get a reliable base, for example, under the installation of a barbecue, you can make a column, ribbon, boronobic pile or monolithic foundation.
- Tree or metal frame . It usually consists of vertical columns, upper and lower strapping and railings.
- Slinge system . It is made from the bar and consists of the rafters themselves, the crossbar to increase rigidity and the transverse crate for fastening the roof.
Three-dimensional model of walls
Examples of projects
In fact, all the arbors are made by similar technology. Initially, the framework is built, and then it is trimmed with polycarbonate sheets. Since this material is very light, you can transfer the design to the desired place without any problems.
If you buy ready-made designs, then with the installation they will cost you at least 24 thousand rubles. It will be cheaper to assemble the design yourself: if you use sweater materials, then the costs will be less than 5k rubles.
Examples of prices for finished designs
Welded gazebo
Design assembly
Welded design options have a one-piece framework, in which all the elements are made immediately, including benches and a table for the arbor. It remains only to install it on a reliable base and to entertain the appropriate material.
Article on the topic: Detector of hidden wiring MEET MS-158M
If you have a welding machine, you can make a metal frame using the drawings below the pins from the polycarbonate with their own hands, or order the design on them in the workshop.
Drawing simple arbor
- The drawing shows a popular budget version of the gazebo with a capacity of up to 8 people. The price of its manufacture does not exceed 5 thousand rubles during self-assembly. The main cost of expenses will be steel profile pipes 25 * 25 * 2 mm, which will be required almost 50 meters.
- The roof is made in the form of the arch, so the pipes for it are most likely to be ordered to be ordered on metal bondage. It is made of a pipe with a rounding of 3 meters. The dimensions of the design at the base: 160 * 197 cm, height to the upper point 210 cm. The walls are set at an angle of 75 degrees.
- Inside to the walls, a frame of benches is welded, a table is installed in the center.
- The assembly of pipes is made with solid welding according to GOST 5264 using E42 electrodes.
- Paul, table and shops are trimmed with a stranded grinding board 25 * 125 mm.
- Wooden elements are covered with an antiseptic, and the enamel of PF-133 is painted on the GF-021 soil.
- Sheets of the skin are attached to the roof of the arbor with self-drawing through rubber gaskets, the sunscreen upwards. It is impossible to harden them to the frame. Additionally, you can also seize the walls from the wind.
- Below is a simplified version of the arbor. In fact, it consists of two benches, which are carriage elements for fastening the roof. A arc is welded to the benches and 1 sheet of polycarbonate is attached.
Shops with a canopy
Articles on the topic:
- Gazebo 2 2 meters
- Gazebo do it yourself: drawings, photos, video
- Arbors from the profile and polycarbonate do it yourself
Simple rectangular gazebo
The following option has a simple shape, and is well suitable for a small country area. It was made of available primary materials, but at the same time the result turned out to be quite beautiful.
Article on the topic: When installing doors when repairing: before finishing and after its end
The roof will be able to withstand large snow loads in winter, and it is a continuation of the garage, as a result, it was not necessary to build 4 walls.
Appearance of the finished design
From materials used old pipes, cement, metal, polycarbonate and mining wood. The support columns are made of sewer pipes 90 mm, and the upper strapping from the profile pipe 20 * 40 mm.
The rafters are made from the profile pipe 50 * 50 mm.
- The floor is poured with concrete on the rammed substrate from sand and rubble. The composition of the mixture: 1 part of cement, 3 sand, 4 rubble.
- Then the floor should be desiccated, pouring dry cement to the surface, and pushing it with a trowel.
- The perpendicular income of 30 mm boards is stacked on rafters, and the roof is covered with a straightened. It is better not to use polycarbonate for it, as it will be hot inside, it misses the sun's rays very well.
Assembling frame of metal rubb
- All metal structures are covered with special paint on rust.
- The polycarbonate is covered with walls at the top under the roof, and below the level of the railil.
- The cells on the ends are closed with a scotch and plastic nozzle so that nothing falls inside.
- Sheets are attached to the screws with rubber-free washers. Holes are drilled by a larger diameter than the leg of the self-press.
Tip!
If you decide to cut the polycarbonate with a hacksaw, there will be a lot of garbage, which will fall inside the hundred.
So that this does not happen, it is better to cut off the sheets with a sharp knife.
The main advantage of such a building is that you can hang transparent curtains from PVC or a mesh to open areas, and completely defend from mosquitoes on the street.
Project building with round roof
Articles on the topic:
- Arbors of metal and polycarbonate
- Gazebo from the profile pipe and polycarbonate
- Polycarbonate roof for gazebo
Hexagonal gazebo
The next building has a beautiful appearance of a hexagonal form. Dimensions: 2.9 * 2.6 m (diameter 2.9 m, area - 5.1 m). The input has dimensions of 970 * 2090 mm, and the total height is 3 meters.
- The "skeleton" of the design is made of steel rolling profile. Walls remain open and painted after assembly, but you can also close them if desired.
- The frame is installed on the finished reinforced concrete foundation or an even base of the road tile or asphalt concrete.
- The roof is covered with cellular polycarbonate.
Article on the topic: What can be made from glass cans: candlestick and vase with their own hands
You can look at the drawing of the gazebos from polycarbonate:
Frame drawing, top view
Drawing with dimensions
Articles on the topic:
- Rectangular arbors
- Drawing of the profile pipe with sizes
- Sparkling welded
Tip!
Inside a gazebo 6 or 8 coal shape, it is best to install shops along the walls, and in the center to do a round table or a brazier.
Conclusion
Polycarbonate is well suited for quickly creating a beautiful and durable gazebo. If there is a minimum set of tool, you can assemble it for 1 day yourself. Instructions on the video in this article will show you the process of plating the design of complex shape.