Car repair implies not only replacement or restoration of structural parts, but also finishes. And sometimes there is no less difficulties with the latter. Remove the trim from the back door seems to be simple, but there are nuances here.
The door of the trunk
Types of body
The appearance of the trunk and the features of the trim are determined by its design. There are several types of body. Their design is almost the same regardless of the model - Casca, Grant Liftbek, Opel Antara, Lada.
- Sedan is the most common option. The closed body in which the trunk is separated from the salon and does not have a lifting door.
- Hatchback is distinguished by a shortened rear breath, and the trunk closes the door in the back wall.
- The wagon is a more bulky bulky body. Here the luggage department is one whole with a salon, and its cover is elongated to the rear dimension. The volume of the luggage section becomes noticeably more.
- Liftbek is averaged decision between hatchback and universal. Unlike the first in Liftback - for example, a grant of a lifbec, a longer rear Sve. At the same time, the door can be attached, like a wagon, or a more stepped, like a sedan.
Liftbek Grandmate
- The coupe is a closed body, the luggage section is rotten from the cabin, the door is absent. The volume of the section in this case does not exceed 0.93 cubic meters. m.
- Convertible is a model with a folding riding of different types. The luggage compartment is missing.
- Roadster is a sports version without a roof or with a rigid roof.
- Targa is an option of a sports car with an arc security from behind seats and a removable roof.
- Limousine - according to the design resembles a sedan, but with an elongated body and a rigid screen between the driver's and passenger interior. Luggage compartment like a sedan.
Article on the topic: How to make stencils for the ceiling with your own hands?
Limousine
- Stretch - has an elongated salon due to the additional section between the rear and front seats.
- Van - a double version with a closed body. The luggage section has its own door.
- The SUV is a closed model with a luggage compartment by type of wagon. The car is characterized by increased patency.
SUV
How to repair the luggage branch of the car Nissan
In fact, it all depends on the design of the finishing value. Usually it performs a purely decorative function.
- For example, to remove the cascades trunk door trim, it will be necessary literally 5 minutes. To do this, you need to unscrew the screws in the opening knob. Then in the sections of the plastic docking in the department free latches. Then you can remove the trim from the pistons. Montage of the casing in the trunk takes the same time.
Nissan manufacturers prefer the most simple engineering solutions in finishing matters, and therefore, the replacement of the sheat is practically in all models of Nissan, not only Casca, but also Centra, Tiana, terrano is produced by the same principle.
Luggage branch of the car Nissan
How to remove the finish at Chevrolet Niva
Chevrolet Niva trunk trim is also a purely decorative detail. The material is well clean, so that it is quite possible to wash it on time to wash if, for example, chemical cleaning is not available.
- Opening the luggage door, we unscrew the top screws on the decorative frame.
- Remove the decorative plugs on the lower parts of the frame. Remove the screws under them.
- Unscrew and remove the tank tube of the rumble. Then remove the neck located under the cork.
- Flat screwdriver are fitted around the perimeter and carefully clean. Along with the covering, plastic pistons are removed. The latter with such a procedure breaks, so you have to purchase new details. Pistons are universal and for Chevrolet Niva fit any.
How to remove the liftback grant liftbek trunk
For the Lada - and the wagon, and the hatchback, the action scheme during repair is used the same. Grant Liftbek is no exception.
- Open the luggage compartment, find a plastic inner handle and a crusading screwdriver with a thick blade, unscrew the fastening bolts.
- Then a flat screwdriver pulls out the pistons-retainers around the perimeter of the trunk. At the same time, the screwdriver is slightly suited.
- After the spinages are removed, remove the casing with the latches - the latter are placed in the upper part, where the castle is located.
- Remove the casing entirely. Now it can be cleaned or replaced with another model with a large wear.
Article on the topic: Procedure for the leaks of the balcony
Repair of the luggage branch Tiguan
On Volkswagen, the procedure for action is somewhat different.
Tiguan trunk casing, for example, is removed as follows.
- First, the side clips are unscrewed using a hexagon key. Then they separate the lining from the faces to fix the grid. It must be applied.
- Then the casing is strolled from the upper clips.
- Twisted screw from above, sidewall screws and with a folding hook.
- Then separated - with an effort, the casing around the perimeter, releaseing the remaining clips.
- Fixation in Tiguan is pretty tough, so it is recommended to remove the cover alternately: first with the left, then on the right side.
The video demonstrates the removal of the trim on different models: Tiguan, Opel Antara, Cascai.