If you want to build a stylish gazebo quickly and cheap, use a hill for this - the cheapest sawn timber. Thus, you can not only equip the place of rest, but also decorate the plot. The only one, first familiarize yourself with all the subtleties of construction, with whom I will share below.
Girths from the Glaska look original and do not require large financial costs for construction
What is horsicle
The porch is often confused with an unedged board, but in fact it is a separate type of lumber, which is a sidewall of a log. At the porch, unlike the unedged board, a smooth surface (sleep) is available only on one side. Overview is located on the sides and behind.
Therefore, the porridge, it is Obapol, it is even cheaper than the unedged board. At the same time, Ozol protects it from moisture. The structure of it has a little untidy rustic appearance under ancient. This is his raisin.
Gorny is a sidewall log
Of course, it is possible to use a grease from the porridge only if the area is decorated in a rustic style. It will greatly be harmonized with a log cabin in the old Russian style.
If the house on the cottage is decorated with balustrades, and the plot is decorated with sculptures, such a gazebo will not be at the place.
Features of the design of the arbor from boards and a porridge - prepare the project
The gazebo from the porridge is a frame, more often a rectangular design. The carrier function of the structure is performed by racks from the boards with a thickness of at least 30-40 mm. To give the stiffness of the design of the same boards, the lower and upper strapping is performed, which binds the racks. The hill is used to cover the arbor, i.e. Es exclusively as a facing material, therefore the carrier function does not perform.
Article on the topic: How to make the floor from GWL do it yourself?
Pumping applied only for construction
The roof in principle can be any single, duplex or multicate. However, in the rustic style it is better to make a double - this is a classic option for wooden rally, which will imitate the structure. Roof Design Standard - Response Sprinkle Feet Forming Triangular Stropyl Farms. To give stiffness, we will use the ski run, which will link the farm.
Schema Arbor from Glaska
Deciding with all the nuances of the design, create its project on paper. It can be performed as a simple drawing or sketch. It is only important to display all the details and specify the dimensions.
The dimensions are selected with the fact that for one vacationer requires at least 1-1.5 meters square. In addition, it is necessary to provide space for furniture. If the gazebo will be located barbecue and woodwood, it will also require at least one or two additional square meters.
Build a gazebo of pine boards and a horn
Step-by-step construction plan Arbor from Glaska looks like this:
Plan of construction arbor
Next, consider how to build a gazebo from beginning to end.
Preparation of materials
For the construction of the arbor, the following materials will be needed:
- Harby himself;
- Pine boards with a thickness of 100x30-40 mm;
- Logs with a diameter of at least 100 mm;
- Firebi-protected impregnation;
- Bituminous mastic and ruberoid;
- Roofing.
For the connection of the parts, I recommend using the proven option - corners of stainless steel and screws.
Having a drawing before your eyes, you can independently calculate the required amount of all materials.
Optimal place for the construction of the arbor - at the water
Choosing a place
The resting place on the plot should be hidden from prying eyes, but at the same time, the surrounding landscape should be taken into account and in general the convenience of its location. The classic option is the construction of a gazebo in the garden.Garden gazebo is usually shaded and hidden from the neighbors gaze - a high fence or thick shrubs solve the problem. The only thing in mind that some trees can blur with their fruits a gazebo and holidaymakers.
Article on the topic: Door update with your own hands: decorating by planks and platbands
If there is a reservoir on the plot, then in this case there is nothing to think about the rest of the rest on the shore.
Device base
So that the gazebo looked as authentic as possible, we will make the basis of the logs. To do this, it should first be prepared to prepare a tree - to treat flame-coat, then cover with bitumen mastics and wrap the rubberoid.
Further instruction looks like this:
| Illustrations | Actions |
| Training site:
|
| Installing columns:
|
To perform the foundation, it is advisable to use logs from a dense and durable tree, such as oak.
Articles on the topic:
- Arbor from pallets
Making framework arbors from pine boards
Now you can proceed to the strapping device.
| Illustrations | Actions |
| Installation of lower strapping and installation of angular columns:
|
| Installation of intermediate racks. Secure the intermediate racks from pine boards in a step of about a meter. |
| Installation of the upper strapping. Connect all the racks upper strapping made of boards. Boards position so that they will be attached to the racks. |
On this wooden frame ready. Immediately you can put on the floor of the lags and lay the boards so that it is convenient to move and mount the roof.
As a flooring for the floor, it is advisable to use a terraced board. It does not require care and does not rot.
Install the roof
Now proceed to the installation of the roof. This work is done like this:
Article on the topic: Purple wallpapers in the bedroom interior: Useful rules (photo)
| Illustrations | Actions |
| Installation of the rafter system:
|
| Installation of crates. Secure the boards across rafters. To do this, you can use even the unedged board. The step depends on the thickness of the board and the type of roofing. As a rule, it is 300 mm. If the coating is mild, you must perform a solid crate. |
| Installation of roofing . The roofing material is stacked standard - necessarily with the overlap, fixation is carried out by screws or nails. You can learn more about the label nuances from the instructions from the manufacturer. |
Testing and finishing
To perform the trim, the middle strapping should be fixed. The latter can be made of boards or timber. At the same time, the space between the floor is trimmed with a hill. Similarly, a summer open gazebo is performed.
If you want to make a closed gazebo, you will need several strapping belts, which will allow us to fully decide the design of the hill. In this case, it is necessary to form window openings. To do this, it is necessary to fix the rack between the strapping.
If you position the hill horizontally, you will not need an additional strain, as the boards can be secured directly to the racks.
With horizontal mounting, the middle binding is not required
As for the paint coating, the optimal option for the porridge is impregnation, which does not change the appearance of the tree or slightly tints it. Varnish and, moreover, paint will spoil the natural attractiveness of this material.
That's all the nuances of the construction of the gazebo using the hill.
Output
Now you know how to build a cheap and pretty gazebo from a hill, which will be able to simultane more than a dozen years. If difficulty will arise contact me in the comments, and I will gladly help the Council.