We offer you a master class on sewing capes with a hood, which can be both adult and for a child.
This lesson will come in handy for beginners of craftsmen, as it is easy to sew such a cape just enough.
So, it is necessary to prepare everything you need. First of all, it is a fabric that can be from cropping the previous sewing. Also need scissors, all sewing materials, roulette, buttons, etc.
We start a lesson who will tell and show sewing cape with a hood, pattern for which is quite simple. We decide the fabric and cut the part of the rectangular shape, the dimensions of which depend on who should be sewed to the cape.
Do not forget in short edges to postpone the stacks on the seams. We begin these edges and flashing the line.
Now you should give the shape of our flood, which has rounded edges on the bottom. For this, the fabric should be folded in half and gently cut corners, rounding the edge at your own request.
Next, the opposite of the rounded edge must be a little assisted. This part of the raincoat will be located on the shoulders. For this it follows, retreating from the edge of 5 mm, to manually make the pillage seam throughout the upper edge.
Securing the thread, then we climb a little cloak along the same edge.
The assembly is best to be fucked by additionally pins.
At this stage you can enjoy a hood, the billet for which was pre-executed. Remember the short edges we were already exposed and fascinated? It will be the front edge of the hood. The upper part should also be sewed by folding the hood in half the face-side inside. The corner is recommended to "cut" a bit, fading diagonally as shown in the photo.
The lower edge of the hood should be sewed to the edge of the cape itself, which was slightly selected.
In general, the cape with a hood is ready, only left to sew a button that will fix two sides together. To do this, from one edge of the capes should be sewn, from the other - to do a response hole.
Article on the topic: Boston fabric: Composition, property and application
Please note that in this case, fleece was used for the product, the material of the edge of which does not require additional processing, which is quite convenient for beginners. If you use another fabric that you definitely pay attention to the edges and, if necessary, process them additionally.
Here is a pretty cape for the baby turned out to be ultimately.
It will be comfortable to take with me for a walk and throw on the child, if a little creates.
Creative success to you!