To be stylish and beautiful you want any girl, especially in the summer, when you do not need to wear boring warm down jackets and boring fur coat. In the summer, in the height of the cream and colors, when the mood and weather is equally sunny, I want to wear a bright sundress and walk along the city streets so that everyone admire and turned around. If you do not have such a fashionable thing, we propose to sew a long sundress with your own hands.
Required materials and tools:
- T-shirt for the template;
- 2-2.5 meters knitted colored fabric;
- elastic rubber band;
- tape for edging or oblique beyk;
- sewing supplies;
- scissors;
- sewing machine.
Cut the details for a long sarafan
Before sewing a long sundress with your own hands, we will give some tips: choose a fabric that contains a polyester, it is much easier to work with it. During sewing, be sure to use Overlock, if it is not on your sewing machine, then shake with a ball needle or a simple elastic line. Try not to stretch the cloth during sewing, otherwise it will lead to the formation of wrinkles. Take your cloth and put it with the involving side down. Fold the two sides of the edges to the middle. For the vertex template, we will use T-shirt. Fold it in half and attach to the fabric. To make the dress, it is necessary that the dresses width be 1.5 times wider than the width of T-shirts. Decide with the length of the dress, for this measure the length from the center of the front to the point of the future hem. Add a few centimeters for storage spaces. Cut the fabric to sleep. Divide this value in half, as we work on bending. Decide on the future width of the dress. Add an allowance for the seams and cut the holes for the hands and neck on the folded floors of the fabric, look at the photo for the example. Cut corners from the fabric where straps will be located.
Article on the topic: Sweater for dogs with knitting needles: master class with diagrams and video
Make Ryushi for Sarafan
Cut from the fabric two strips of 5x40 cm. For top ruffles, cut off a piece of 121x10 cm. Sew the side sides of the front and back of the dress. Sew the short ends of Ryush to decorate from the wrong side. Attach the stitched rules to the dress and enter them on the sewing machine. Leave immense holes for straps. Remove the dress out and press the edges of Ryush. Purge along the top edge.
Shem belt
To make the belt, cut the tape for edging sufficient length. Attach it to the wrong side of the dress and step up along the lower and upper edges, leaving a small hole is unimpressed in order to insert an elastic band. Measure the waist girth and cut the desired length from the gum. Insert the rubber band through the hole. Sewing left hole.
Semide straps
Take one strip for straps, fold in half and step up from the wrong side along the long sides. Repeat for the second strap. Remove out. Insert one end of the strap in the hole in front of the dress, repeat with another strap. Attach two other end of the straps to the back. Deliver them to the dress. If necessary, cut off too much from straps. Purge the bottom of the Sarafan and join the finished product. Great job!
