The skirt on the rubber band is easily sewn, is quite comfortable and looks very original. In addition, such a skirt does not require any diets from their owner. Even if the girl adds a few kilograms, the skirt will still sit perfectly. A well-sewn skirt will emphasize the figure and will hide some drawbacks if necessary. Such skirts can wear both slender girls and holders of lush forms.
Required materials and tools:
- Light colored fabric - 2-3 meters;
- Wide elastic rubber band;
- fabric for pockets;
- Portnovo needles;
- threads;
- sewing machine.
Cut the details for the skirt
Such a skirt on the rubber band will be combined with any accessories and emphasize your individuality. First of all, measure the girth of your waist and the length from the waist to the knee or the middle of the leg (depending on how long your skirt is). For our skirt, we cut off 73 cm from the elastic gum. Since the width of the skirt must be twice the length of the gum, we cut off two pieces of the main tissue with a size of 76x63 cm. Cut from fabric pockets.
Seer pockets
Attach your pockets to the side of the skirt. Fold the details of the front parties and fasten with needles. Stop along long side sides. Suggest your pockets on the front side. Attach the second part of the pocket to the second side of the skirt. Street from the upper edge of the skirt along the pocket line, down to the bottom edge of the product. Fold the front parties together two skirt details and push the edge where the pocket is located. Do not forget to repeat for the second pocket.
We flash the Nizhny Kra
Now it's time to handle the hem. Generate a 0.5 cm bottom edge of the skirt on the wrong side. Bind the iron along the entire edge. Now regenerate the edge by 2.5 cm and again start the fibe of the iron. Stop along the bottom edge of the skirt on the sewing machine.
Article on the topic: Homemade Tractor Belt 4 + 4 with their own hands with an engine from Oka
Sew skirt and gum
Then take an elastic rubber band, fold it with the sides together and push along the short sides. Cut unnecessary if necessary, process the edge overlock or zigzag line. Attach the top edge of the front side of the skirt to the upper edge of the elastic edge. Secure, where necessary, portno needles. Stretch the gum and start sewing the skirt to it so that the belts are formed when the belt is formed. Then handle the edge of the skirt joint and zigzag lines belt or overlock. Cut extra threads and endure the finished skirt. Great job!
