One of the design options in the room is carried out with the help of drinking wood. It is mainly used for country houses or cottages, but you can use this option and to decorate the room in the apartment.
There are many types in design with the help of sleep, and we will try to familiarize yourself with some of them.
Wall of Sveta Tree
This part of the room is the most popular in terms of design, so it is the wall that finish with wallpaper, whitewash or wooden material.
Heat itself is a smooth transverse layer of wood, which is often used in designer solutions. Each of the elements is distinguished by its uniqueness, because ideally exactly one into one cut is simply impossible. On each of the plates, the annual rings of trees come out, no contour from which cannot be repeated in others.
In order to arrange the wall, we will need directly the spils themselves, glue, varnish, paint, or verse. To bring sleep in a normal state, you need to remove the upper part (bark), while the layer thickness will not have a strong value. Alternatively, the bark can be left, which will distinguish the excellent effect for interiors in rural or ethno style.
Recommendations for decorating wooden solis
- The first and most important point are perfectly smooth walls on which we will glue a speech. They must be pre-prepared and cleaned.
- Think out wood laying options, because you can lay the entire wall, or make a small fragment or accent.
- By the way, the partial laying is sometimes used for the design of the head of the bed, or a plot above it.
- The best sleep is suitable for connoisseurs of rustic or hunting style, which will appreciate each element and accessory of design.
Article on the topic: how to make homemade earthen bur (Yamobur, Domber)
Types of wood that is used for sleeps in the decor
In principle, various species of trees are used for log cabins, but most popular are: pine, spruce, ash, fir, oak and birch. After completing working with wood and sticking, it will be necessary to cover with varnish and a fixer.
Panel from sleep with your own hands
The second of the popular use options (after wall decoration). The very value of the panel is a certain composition that is most often executed from several tree breeds and individual fragments. Simply put - this kind of art in the image of the picture, which is performed from the cutters of trees along with or without a bark.
It mainly displays some abstraction that emphasizes the atmosphere of the room. It can be done from a crude tree, then only the part is processed, which is glued to the wall.
Fragments that can additionally apply are stumps, branches and wood residues.
You can create anything, the main thing would be a desire and inspiration. In addition, such a picture can be left untouched in the form in which it is or coloring with its paints, attaching dynamism and brightness to its artwork. Additionally, on the end part, some people apply ornament, thread or other design. Such a design can also be used for framed by family photos, other paintings or items.
Outdoor Wood Coating
Since wood is often used as a material covering the floor, the log cabes here also found a place to use. The idea is quite interesting, the appearance of the final result will also not leave anyone indifferent.
It is important to note that the moment that the branches for the cutters covering the floor are absolutely not suitable. Here, the design will be carried out with the help of larger wood elements.
Please note that the cut thickness for flooring will play a significant role, because the constant load in terms of furniture and other factors must be calculated. Another point - do not use the soft rock tree, because it can simply may not withstand a permanent load.
Article: Benefits of playgrounds for cottages
`
The process of finishing the floor will be a bit more complicated than, for example, walls. It is facing on the likeness of ceramic tiles, and during installation they use a special solution. After the elements are installed, grinding is performed by workers, so that we can get a perfectly even and beautiful surface.
The final stage is a treatment with varnish, which in the future will prevent pollution of the floor.
Variety of use options for sleep in the interior
In fact, you can create anything from wooden sleeps. This is not only a wall decoration, but also the creation of individual elements and accessories for interior design in the house.
Designers have long been used in their works such elements of wooden things from a sleeve as:
- Flower pots. It would seem that everyone was accustomed to see them exclusively ceramic. But no, the development of ideas in this direction did not stop on this material. Therefore, you can safely meet a wooden pot of sleeved.
To create such a pot, not very thick branches are used, from which small circles cut down. Of these, then the pot itself is done.
- Shelves. An integral part of any interior, without which it is just not to do. Made from the thick trunk, which is first grinding, and then covered with varnish. Installation of the finished product takes place with the help of brackets.
- From the sleeves of a large tree are made under hot plates and cups. The manufacturing process looks around in this way: first they take a larger diameter, and it takes out the middle of it, which is installed with a smaller diameter. As a result, a rather interesting intricate pattern comes out, which in the future can be painted at will.
- The clock is another useful functional thing, without which it is simply unrealistic to do. First you need to get the clock mechanism. Then, in a predetermined height of wood, the middle of which is derived from the arrows holder. After the arrows and numbers are mounted (optional).
- Framework. Excellent decor for your favorite photos, made of spins small in its diameter of branches.
- Hanger. Probably one of the most used items in the house. It is performed from the sleeves of the middle thickness, which are after inserted into the rectangular frame.
This is still not the entire list that you can make and how to apply in the interior. But we can already conclude that there is quite a lot of useful, and the main thing about the necessary items in everyday life.
Stages of working with spil
It is logical that when the subject is executed using wood cuts, it has not only its uniqueness, but also the nuances associated with the care of the material.
With a transverse cut, the gaps that make wood and the future item to which it will be used, vulnerable. Therefore, it is necessary to carry out primary, and then joinery processing to avoid unwanted nuances in the future.
In the case of restoration of such a tree, the bay method of a special resin is used. The process takes place in several steps, the first of which is pasting cracks with paper scotch, then the layer of resin is poured. Each of the layers should dry carefully, only then can you pour the next one. The final stage will be cutting and removing extra residues. Then the product can already be transferred to grinding.
The second step is polished and oil treatment, after which it becomes smooth and smooth. At this stage, the transitions of natural colors and painting of the tree itself are already vividly. At the same time, the impregnation of oil allows you to see the structurality and the pattern of the spike. It will also protect against the negative impact of the surrounding space.
At the end, it is possible to sum up the result that the spiles from the tree are an indispensable material for both the decoration of the floor and walls and for the manufacture of other items we need. The main advantage will be that all this is made of natural and environmentally friendly materials, which have a positive effect on our health.
Article on the topic: LED tape for lighting aquarium