Laminate as a facing material has long established itself at the highest level in the issue of repair. It is practical, durable and easy to operate. Laying the laminate on the wall has its advantages over other methods of finishing. It is simplicity of installation, a variety in choosing a material, wear resistance, relatively budget price and environmental friendliness. It does not matter where the laminate is mounted - on the floor, ceiling or wall, it always looks great.
This finishing material has one disadvantage - poor moisture tolerance. From it the material swells, so it is not recommended to be used to repair in the kitchen or in the bathroom. Also, the laminate board does not like heat, it has property to burn out and swell.
What to choose laminate for walls
If we talk about the parameters of the selection, then you can focus on the three main characteristics:
- Method of installation. At the maximum smooth surface on which the board is attached, you can choose a finishing material that is directly glued to the wall. Adhesive boards are also easy to mount on the ceiling. In addition, the material can be fixed by fastening the laminated panels on the crate of wooden or metal plates. It is possible to use a tongue laminate - elements are equipped with tongue locks. In this case, the joints between the panels are practically not formed. With this method of installation, the material can be laid on the ceiling.
- Load intensity. For this type of wall sheathing, the material of a low class can be used, since the load intensity is not as high as for the floor. Therefore, it is permissible to choose a cheaper laminate board, managing only its taste preferences.
- Appearance. The stores present a wide range of finishing material. Without problems, it can be reversed under its taste. Very large selection of colors and textures.
Article on the topic: Electroshvabra for washing of floor: reviews and tips on the choice
Mounting work
There are two ways to install laminate on the wall:- The adhesive method provides for the fastening of laminate with liquid nails directly to the wall itself. It is worth considering that at the same time the surface should be perfectly smooth. Therefore, it is worth conducting preparatory work before starting work. Laying the laminate with adhesive way is quite simple, it will not require special skills, every one. The glue is applied by a zigzago method.
- Laying the laminate on the wall using the created crate. This method is beneficial to those whose walls have great irregularities. In this case, it is not necessary to carry additional costs for plaster or drywall to create a smooth surface. Installation can be carried out both vertical and horizontal stripes.
What instruments need
Laying the panels on the wall requires the presence of certain tools. The hammer and level are needed to test the surface on the SCOS. You also need to have a square, ruler, roulette, pencil, silicone, glue, construction cord. For trimming boards, a hacksaw or an electric jig is required. Wooden bar and spacer wedges are needed to determine the gaps so that the material is well layered under the ceiling, as well as to withstand indents.
Mounting process
The installation process is quite unemployed, distinguished by the high speed of execution.Before installation, it is necessary that the material lay down two days indoors. All preparatory work by this time must be completed.
The wall decoration is slightly different than laying a laminate to the floor. The advantage of editing on glue before the crate is that you can save space space. Sometimes this fact is insignificant, and sometimes every centimeter is important, for example, in the kitchen. Material must begin to lay the floor and an angles by 15-20 mm. After the work is completed, it is desirable to install the plinth - so the work will look complete.
How to install laminate on the crate
After the required amount of material is calculated, which is very easy to do (multiply the width to height and add 10%), the school of skill begins.
Article on the topic: How to apply in the interior bronze wallpaper
The wall on which the installation is made should be absolutely dry. Next follows the installation of the crate itself. Installation of laminate on the wall using the crate allows you to produce additional noise insulation and insulate the room. The doom can be wooden or metal. For this, the rails are suitable 2-4 cm. These rails need to be consolidated on the wall by self-draws, screws at a distance of 35-45 cm. Metal frame is made from the rails that are used to install drywall. But the easiest way to use the ready-made systems offered on sale.
The starting point from which laying is the ceiling. Works are performed from top to bottom. Panels are fastened with special brackets or nails, and if there is a flat surface - on glue. Before installing the crate on the wall there is a markup, platbands are removed, the cheek itself is installed. The lock laminate snaps into the castle, previously treated with silicone.
Thus, laminate boards can be mounted not only on the walls, but also on the ceiling. This is a practical material during repair. Laminate is suitable for newcomers in construction. With it, you can embody any idea in interior design. For example, the design under the stone looks good in the kitchen, under the tree - in the bedroom.
Video "Fastening a laminate on the wall"
Want to arrange the walls with laminate? It is quite simple, especially after viewing this step-by-step video instruction.