To begin with, we will understand why this thing needs. The portbooter is a framework for a bouquet and most often used in the manufacture of a bouquet of the bride. The design has a form of a microphone, below is a comfortable handle, and at the top is a playground for fastening colors, on which, as a rule, there is already a floral sponge or another basis. Such a basis for bouquets is sold in specialized stores, but the choice of forms and colors is not too diverse there, besides there are situations where to purchase it is not possible or time. In this case, a great output from the position will be the creation of a portbooter with their own hands. Using the information presented in the article, you can learn how to manufacture the bases for bouquets from available materials.
Cardboard product
A good alternative to the shopping option can be the basis for a bouquet of cardboard:
It will be enough just to make even beginners, if you precisely follow the instructions described in this master class.
For the manufacture we will need:
- Several segments of dense cardboard. You can use unnecessary cardboard packaging from under household appliances;
- pencil or thin marker;
- scissors;
- glue pistol;
- a small piece of foam or floral sponge;
- Stationery knife or sharp plugs;
- Decorative elements - ribbons, rhinestones, beads, etc. - at will.
On a piece of cardboard, you need to draw and cut the circle, with a diameter of about twenty-five centimeters. In the center of this circle you need to cut a small round hole. As a result, a kind of "bagel" should turn out.
Next, you can cut several strips of finishing fabric - it can be an organza, a thin felt, or take a few meters of a wide satin ribbon. Then you need to push the cardboard bagel with these ribbons so that they are slightly superimposed by one to another, forming beautiful folds from the center.
Article on the topic: Spring Flowers from corrugated paper
On the inside of the circle, several holes are made, in which the segments of the wire are inserted and tightened together into the harness, forming a handle. Instead, the wire can be glued to the opening of the segment of the cardboard cylinder from under paper towels or food foil. The handle for a bouquet can also be made from a rectangular segment of cardboard, rolled and glued in the shape of a tube.
The knob and the lower side of the circle can be decorated with artificial leaves, beads or ribbons. In the center, the bubble is attached a semicircular piece of foam or floral sponge - flowers will be fixed in it.
Read more In this video:
From the subwoofers
If there was no cardboard at hand, you can use plastic, which can be detected in any house in the form of bottles from under various beverages. As a result, you can get here such a plotter from a plastic bottle, which can be subsequently decorated at your request:
For its manufacture, you will need a plastic bottle of medium size and hot glue. The bottle must be cut into parts so that it turns out a funnel from the neck, the bottom and a cylindrical tube, as can be seen on this photo:
In the bottom it is necessary to cut a round hole using a preheated knife. All parts we collect together with glue and decorate the finishing cloth, ribbons, beads or other elements.
One of the most economical options is punishing napkins for cleaning - they are a variety of colors and cost quite inexpensive.
Candy mood
Nowadays, bouquets of sweets are becoming increasingly popular. They made a good competition with traditional bouquets of living colors, as they look very beautiful, and besides - edible, do not fade and are a universal gift for any celebration. Here is such a tipbochief you can create yourself:
To create it is necessary:
- Plastic bottle;
- Floristic and stationery corrugated colored paper;
- Tree spanks;
- scissors;
- a piece of foam;
- Scotch and adhesive gun.
Article on the topic: Transformer vest knitting: Schemes with description and photo
Scissors cut the middle of the plastic bottle, cut it in half. The resulting part we turn in the form of a tube and fix the scotch all over the surface.
From the foam cutting the hemisphere of the desired diameter, it is reduced to it with a handle-tube, on the sides of the tube insert wooden spanks into the foam and allocate all together. Excess the length of the spedes cut off with a knife or scissors.
Polyfoam is gluable by the stationery corrugated paper, and the leg of the bubber is floristic. At the base, tie a beautiful bow from the ribbon.
The basis for bouquets also often serve a variety of shaped coasters in the form of a basket, ornamental carriage or lukashk. They are flying from newspaper tubes, harnesses or other materials and painted in different colors. You can make a carriage, for example, using a colored wire or wire, plated with color corrugated paper. Instead of polyfoam, you can use the mounting foam as the basis for fastening the components of the bouquet. The buckenets frame can also be wrapped with multi-colored threads instead of corrugated paper.
Design options can be a lot, the main thing is to apply a little fantasy!
Video on the topic
A selection of an interesting video: