If you pay enough time to this process, then the finish of the pre-tribades will be the key to the creation of maximum comfort in the bath. The main goal of this room is to delay the air from the street moving towards the bath, which allows to ensure the safety of a certain temperature level inside the bath. The pre-banker is used as a place to "cool" after the steam room. Features of the decorative part of the decoration of this place are a personal matter of everyone, but the practical side will require compliance with some nuances. For example, the size of door openings and the type of door opening.
Choice of finishing materials - PVC panels, lining, block house
When choosing materials for finishing the steam, it is also necessary to take into account not only the decorative component, but also the properties that one or another material possesses. I will probably start with PVC panels. Among their positive parties, a relatively low price can be distinguished, as well as the simplicity of installation. If adding to this also a huge range of colors, as well as moisture resistance, then the material may seem perfect at all. Unfortunately, rarely someone decides to separate the pre-banker, because plastic will not create the most unique aroma of a natural tree, which is able to immerse a person who came out of the wage to the atmosphere of comfort and peace. In addition to the entire PVC panel, it is quite vulnerable to mechanical damage, as well as be able to carry out too much heat. This option is to be considered only in case of serious financial constraints.
The following material for consideration is the lining. It provides a premises a pleasant appearance and warmth, and also fills it with incredible flavors that contribute to calmness and help restore forces. It should be noted that the decoration of the walls of the clapboard is a fairly time-consuming occupation, which requires special accuracy and attentiveness, but at the same time it can be performed with their own hands.
The third version of the material for finishing the pre-banker is a block house. Perhaps he has the greatest number of positive parties. I'll start with the fact that it is completely environmentally friendly. The fact is that it is made exclusively from high-quality wood, which previously passed the drying process in several stages.
Article on the topic: How to make a ceiling box of plasterboard?
When it comes to a block house of coniferous wood, this is a guarantee of high quality material. This finish makes it possible to ensure the correct microclimate in the pre-tribbon. It is advisable not to use a block house from deciduous trees for the same purpose, since it is characterized by an increased hardness that in the case of the bath is not a relevant requirement. The natural level of waterproofing and resistance to the processes of rotting the block house provides due to the presence of natural resins. A block house withstands the external influences of a different level of intensity without losing the initial appearance.
Mounting work step by step
After the choice of material was made, you can start the installation of the installation. I will tell you more about how to separate the pre-tribades with the help of lining. It all starts with the fact that the ceiling and walls are squeezed with rails in a step of forty centimeters with the definition of the horizontal or vertical position of the boards during the finish. A layer of insulation, for example, felt or mineral wool can be laid between the rails. This will provide the necessary level of heat in the pre-tribbon.
To create a vapor insulating layer over the insulation, you can fix foil.
The first board is installed using self-tapping screws, which make it possible to hide the place of attachment from extraneous eyes. The next board must be installed with a spun in the groove, thus filled the ceiling and all the walls, after which the room becomes fully trimmed, which makes it a great place for high-quality rest.
Floors in the prebator
The process of finishing floors in the pre-tribunals must take into account the moment that the room is distinguished by an increased level of humidity, which can cause the process of rotting, to prevent which can only be high-quality waterproofing and a properly equipped flow of water. Best of all, if the floor covering is from natural materials. Perhaps even with insulation or with a built-in "warm floor" system.Article on the topic: Krepim Plasterboard on the wall and ceiling with glue
The floor design in the pre-tribades can be different, but regardless of the final choice, the vegetable layer of at least fifteen centimeters should be cut and removed. In the event that it is necessary to raise the floor level or to dissolve its surface, you can use the method of snowing with heavy ram - ground, slag or clay. The most important thing is that raising the level of the floor in this case is not higher than the foundation of the building.
Perhaps the easiest way to create floors in this type of room is to stay on the earthlings. Unfortunately, under the constant impact of moisture, they can become ordinary mud, since the soil in any case will pass water. A more optimal option is therefore a clay floor that skips the minimum amount of moisture.
Successful design solutions
Fortunately, the internal type of finishing of the pre-tribada is not limited to a standard set of actions affecting the aspect of insulation and trim. In order for rest in the bath to be the most comfortable and enjoyable, the pre-tribbon should be thought out to the smallest detail. Often, for the design of this room, they use the classical style of a Russian bath, creating an authentic atmosphere and a special comfort.
In the event that it is a small room, then it will be necessary to equip it with stools and hangers for clothes. This is the practical side of the issue. Aesthetics in the design will add thematic patterns or a different bath attribute, woven on the walls. If the preferaber is quite large, then the choice of furniture is significantly expanding. Take a look at a variant with sofas, the finish of which is made of artificial leather. You can add the interior with wooden chairs or benches made in the same subject.
Video "What you need to know before mounting plastic lining PVC"
The record shows how to carry out the installation of plastic lining PVC.
Artificial Marble Artificial Marble