The carafan pattern on the rubber band, proposed in this article will help you easily and just sew a great summer sundress! On how to sew a sundress on an elastic band, namely: Highlights and small tips you can find out by familiarizing yourself with this material! First, before starting to work, it is necessary to determine the length of the future sundress and on the basis of the length of buying fabric. Well, and secondly, it is necessary to remove the measurements.
We offer several options for the same type of sundresses on an inspiration gum:
So, the main measurements (numbers substitute their own):
• about (hips girth) - 96 centimeters;
• OG (chest girth) 92 centimeters. This measure can be considered defining if you have more than about, we use the last value.
• DT (waist length) - 106 centimeters.
In this case, we describe the variant of a long sundress.
For this model, the sundhany must be purchased a thread-elastic band in tone of the fabric !!!!!
So, in order to build a pattern, draw a rectangle whose width will be equal to * 1.7. The length of the figure will be equal to DT + 25 centimeters.
The main point is that this sundress is sewn with one seam, which is located in the center.
Here is a drawing that contains the main measurements and values.
Do not forget that the seam allowance should be at least 1 centimeter.
Sequence of operations:
• In the width, we grasp the thread-elastic line, the distance between which may be the same, for example, 0.5 centimeters or alternate:
1st line - 0.5 centimeters from the edge (the edge must first be processed);
2nd line - 1 centimeter from the previous line;
3rd line - 0.5 centimeters from the previous line;
4th line - 1 centimeter from the previous line, etc.;
Thus, it string to the width you need.
Article on the topic: Crochet square mats. Schemes
• Then we fold the cloth is halier along the long side, measure the figure, leisurely and spend, retreating from the edge of 1 centimeter;
• process the edge of the lines overlock or zigzag;
• Also enter the bottom of the product;
• Conduct the bottom to one or two weapons, coaching and passing;
• Remove the backbone.
If the fabric is very transparent, we should take two lengths on the sundress, for your way to make a double layer.
Optionally, you can sew straps.
And also at the bottom of the dress you can sew a waist, then DT should be reduced to the width of the volan. However, it should be remembered that the waiter should be needed to be wider than the sundress itself by about 1.5 times.
To make a waist, we make two lines on the upper side (the distance between them is about 0.5 cm) without fixing the ends of the thread. Then neatly tightening the threads, so as not to break them, make the assembly. We take and add a waist to Sarafan.