Dear readers of the Internet magazine "Handmade and Creative"! We have a great idea for those who love to travel. Do you know the situation when you stand at the airport, and dozens of bags and suitcases are spinning so similar on each other on the baggage carousel? We offer to make an individual birch, which will help to allocate your suitcase among others. The luggage tag is made very simple, and the materials are quite accessible to everyone.
Required materials and tools:
- any sewing machine;
- Additional sewing machine foot, which will make it line on vinyl or plastic. An ordinary foot can adhere to the material;
- Two pieces of fabric measuring 10 cm x 13 cm. These two pieces of fabric can be with the same coloring or different;
- two dense parts for connecting parts (for example, any low-melting fabric);
- one piece of tissue with a size of 6 cm x 35 cm;
- One part of the transparent vinyl size of 5 cm x 10 cm (you can cut this part of any packaging or buy in the store. Usually it is sold to the Method and use it, for example, as a table coating);
- threads for connecting parts;
- needles.
Cutting out
Cut from the fabric two rectangles with a size of 10 cm x 13 cm. They will be the front and rear of the tag. Cut the two parts to connect the parts with a size of 10 cm x 13 cm. Cut the third part of the tissue with a size of 6 cm x 35 cm. It will be a strap for tag. Cut the necessary two parts from vinyl size 6 cm x 10 cm. It will be needed to create a transparent pocket for information. With the help of an iron, glue two parts of the slightweight fabric to two parts of a tissue with a size of 10 cm x 13, see. Follow the manufacturer's instructions.
Article on the topic: Bolero from grass with knitting and crochet: schemes with description and video
Stitching details
If you used not a lightweight fabric as a gasket, and the usual one, then you will have to just sew it to the involve side of the main fabric pieces. Adjust your sewing machine. We will need the longest stitch that can sew a machine. Stop over the perimeter of the rectangle, trying to stick to the edge as close as possible.
Redighten the typewriter again to a smaller line. Place the vinyl part in the center on the front side of one of the main fabric parts. Now the trick is vinyl from three sides. Leave the fourth side unpripted. Through this hole it will be possible to put the necessary information into the pocket.
Roll a piece of cloth with a size of 6 cm x 35 cm in half the face side to each other along the entire length. Using 6 mm per battery on the seam, step up the long edge of the strip. Do not drain the edges. Remove the pipe is evident.
Now place all parts in front of yourself: two parts fabric / gasket and one part long strip pipe. Over the edge of the cloth / gasket for 6 mm - 10 mm to the wrong side and lay. Turn the corners so that the fabric watches inside.
Now expand the long pipe so that the seam is in the center and endure the strip.
Now connect the two parts of the cloth / laying with the invalid side together. Between them, place the strap, having finished it in half and hiding the seam. The edge of the strap is located in the center of the short side of the main part. Scaliate all the needles.
Now, starting from that edge, where the strap is attached, go around the perimeter of the entire tag. Try to make a line as close to the edge. Secure the threads at the beginning and end of the seam, do trust unnecessary.
In the transparent pocket insert the card with the necessary information. Your luggage tag made with your own hands is ready! Attach it to the bag or suitcase and feel free to go on the road.
Article on the topic: Cracked cord crochet step by step: master class with photos and video
If you like the master class, leave a couple of grateful lines to the author's author in the comments. The simplest "thank you" will give the author of the desire to please us with new articles.
Encourage the author!