Today we will tell you how to weave the shambal bracelet for beginners. In modern life, the Shambala bracelet came from the monks with the help of brothers Cornerpe, which in 2001 presented a collection of these bracelets with precious stones, naturally, that the cost of this jewelry reaches several tens of thousands of euros. In traveling on Nepal, they studied culture and brought from there the idea of creating stylish things for the general public.
The shambal bracelet is now created simply as a decoration with a trading sign, without carrying any secret meaning, although the original Tibetan monks whipped not just a bracelet, but an overlap, amulet or talisman, putting a special sacred destination in it. The energy of this amulet helped the owner of finding himself in this world, the harmony and the unity of the person from the whole universe was achieved. Be sure to have to do this bracelet personally, the stones chopped into it, selected according to the stars or the predictor council.
Due to the fact that many, seeing dear decorations of the Shambala, wanted to have a similar product, there was a huge offer of cheap bracelets with simple beads for a wider and unpretentious public. However, knowing the history of the scambal bracelet, it is preferable to make it with his own hands, picking up the color range and laying its own energy in it, even if it is semi-precious stones or simple beads.
Selection of stones and colors
The color of beads can be selected in accordance with the elements to which the zodiacal sign belongs. For example, fiery signs (Aries, Lions, Silver) Preference should be given to various red, red-orange and orange shades in beads. Signs (Taurus, Virgo, Capricorn), entering the element of the Earth, it is better to choose yellow, yellow-brown, brown tones. Twins, weights and aquarius (air element) is suitable green, light green and blue colors gamma. The remaining zodiac signs (cancer, scorpion, fish) are aquatic element, therefore, the colors should be similar to the water medium, i.e. Blue, lilac, blue-lilac, from bright and saturated to pale and translucent.
Article on the topic: Fabric basket in Origami technique
All of these knowledge for beginners in the weaving the bracelet shambal will be useful, because All this is useful in the process of work, and the direct weaving process can be considered on the example of the photoerok.
Photo engique on the bracelet
A small description to the photoumok. Prepare need:
- The wax cord of the wine color is 2.5-3 mm thick, a length of 2.5 meters (it is better to have a margin that is easy to cut out than then thinking how to add a lacking material, especially important for newcomers in weaving);
- Glass beads for basic weaving in an amount of 9 pieces, size in diameter up to 1 cm, color: red, green and brown;
- Glass beads for decorating bracelet ends from 2 to 6 pcs., 5-7 mm;
- scissors;
- PVA glue or transparent nail polish;
- You can come up with a weaving base, the main thing is that it is smooth, a piece of foam or a table with a nail / screw, a table and tape for fastening weaving, a tablet with a fastening for papers or a stationery clip for papers, etc.
The schemes practically do not exist for the weaving of the chambala bracelet, work on it is intuitive, i.e. That the color of the materials is that the order of beads in the weaving is chosen at the request of the wizard.
An important condition is necessary before purchasing beads to check the hole in beads, it should be approached under the size of the cord.
Weaving begins with cutting part of the cord. A knotty or "lazy" cord should be about 50 cm, it is attached to the surface. The second long cord is a worker, the middle of this cord is attached to a simple knot on a nodular basis at a distance of 7-8 cm from the edge of the base, therefore, two long working end of the approximate length of 1 meter, located on both sides of the "lazy" cord, are obtained. Beads can be immediately put on a short cord and secure the free end of the cord, and you can wear and as necessary during the work.
Article on the topic: Knitted clothes for small dolls. Schemes
The knot to which weaving is being called is called a double flat knot, it is a simple node Macrame. The scheme of weaving will be clear even debutants in weaving.
The nodules weave close to each other so that the weaving looks smooth and neat, the necessary initial number of nodules - 5 pcs., And then rises to weaving the first bead, it is fluttered from the ends of the working cord from both sides and 1 or 1.5 double flat nodes are tied.
Next, the following bead is shifted and the cord is soaked in the same way. The process continues until all beads are woven.
When the work on the main part of the bracelet is finished, it must be disconnected from the surface and put in the circle so that the ends of the nodule cord lay together.
Weaving the fastener begins, inside the same nodules there will be not one cord, but two ends of the cord, and the nodules must be made not very dense, so that the ends easily slide inside the buckle nodules.
As the fastener is weaving, it is necessary to try a bracelet to make a suitable size, 9-10 double flat nodes should be absorbed in the fastener.
Weaving ends with a regular nodule, and so that in the sock it does not break, it is necessary to fix a small droplet of glue or varnish on withc. Little beads are put on the sliding ends in the fastener, depending on the desire from 1 to 3 pieces.
The ends of the working cord are trimmed to the desired length and you can also wear beads, securing the finish knots.
Here is a ready-made scambal bracelet on the hand of craftsmen.
Example Double Shambala
With experience there is a desire to apply a complicated bracelet version, for example, a double shambal bracelet.
How to weave double Shambalu? Description below.
The length of the wax cord increases to 3.5-4 meters, the amount of beads also increases twice as much as the beads of 10 mm, depending on the size of the beads, maybe it will be more.
Weaving the start of the bracelet can also be made by a double flat knot, only the nodule cord will be fattened, but two. The scheme is presented below.
Article on the topic: Try to tie such a beautiful summer dress with knitting needles.
Having made a certain number of nodes (4-8 pieces), for each nodular cord, i.e. Those who pass inside the node are put on beads, and working cords, first one, then others, are winding cords with beads in such a way as shown in the photo:
After winding, it is better to check again that the beads lay close to each other, and the bracelet weaving ends as well as it started, 4-8 pcs. Double flat knots.
The fastener of the double chambala bracelet is glued with the same and in the same way as with a single-row bracelet.
In the dual bracelet of the Shambhala, and even more so in the triple, you can make a large combination of stones or beads.
Video on the topic
Video tutorials on the theme of weaving the bracelet of the Shambala, incl. and double.