What can tell the master class on jute milliliation with their own hands? First of all, you need to figure it out what it is. Jooty filigree technique appeared recently. This is a style of working with curls, harness and glue. Paper stencils are taken, they are laid out along the contour of the harness, wrapped with glue. It turns out very beautiful things.
To get acquainted with this style you can use schemes for beginners. For example, consider the master class of making plates.
Decorative plate
Take any favorite salad bowl, cover film, fasten and start gluing curls, starting from the bottom of the plate. Curls can be put arbitrarily, trying to observe symmetry, or use some kind of pictures.
Tools - scissors, glue and needles.
No need to cut off a piece of threads at once. First put the drawing, then neatly cut with small scissors and put down. The film is well suited for this, as the rope is perfectly glued on it.
The most basic elements of this style are curls and loops, beautiful patterns are obtained from their alternation.
Attention! We must try not to twist the thread and lay it as it is unwinding from the scum. Otherwise, she can turn around after painting. With glue, it is necessary to work carefully so that it is not too much.
Stop patterns, as you want, so that they are laid more often and denser.
Then you need to separate the pattern from the film with a sharp knife and wipe the glue. Gift diluted PVA and paint if you want. It is possible from a canister or tassel.
As a result, it turns out a plate, as in the photo.
Casket for secrets
This technique uses natural or painted jute. If it is painted, then usually acrylic paints. There is another way to get a white-colored jute cord without dyeing - soaking in chlorine.
Article on the topic: Cross embroidery scheme: "Baba Yaga" free download
So, what will be needed for the manufacture of such a wonderful box.
- Jute cord;
- Glue - titanium or any transparent;
- Leaflets in a cage;
- File;
- Big Motor of Wide Scotch;
- Small scissors;
- Awl;
- Tweezers.
Take a sheet of paper, put the tape on it and put in a pencil.
Mark the center of the circle and shove the sheet to the file.
Throw glue into the middle to the file.
Start twist.
Now, winding the thread, you need to fill the entire circle. Then make another same - it will be the bottom of the box and the lid.
Having reached the end of the future bottom, do not trim.
We must come up with a drawing. If you do not come to mind your ideas, you can use any likely patterns. Draw on a sheet into a cage striped with decorations, less scotch width for half centimeters.
Cut this strip with a pattern and scotch tape to the coil.
Put the scotch on the workpiece of the box of the box, smeared with glue and wind several rows of twine, to the pattern. So the bottom is connected to the box.
Cut the harness and wind several ranks from above.
Loose the first on the harvesting of the curl of glue, cut off a piece of rope of the diagonal. The length of the segment depends on the laid out of the pattern part.
Put on the glue crosshead, one by one.
Thus you need to post the entire pattern. To ensure that the top and bottom necessarily come into contact with rims.
Then leave as you should dry. The dried billet is separated from Scotch - a stationery knife to walk in a circle and remove the scotch.
The lid is done just like the bottom of the casket. It is necessary to put tape and make several rows of winding from below.
The top of the lid is well decorated with jute curls.
Dilute PVA with water and cross the casket. Surplus dried glue can be removed with a hot seer.
Decorate the craft to your taste. It turns out an elegant and beautiful thing.
Article on the topic: Dolphin Crochet. Description of knitting
Video on the topic
Here you can see MK manufacturing products in the style of jute milligrants.