Many people have a question of how to put the walls with independent repair. Fear do wrong, especially the corners, prevents them from solving and fulfill the alignment and budget finish with their own hands. Smoothing is necessary to paint the walls and install the decor on the facade and in the interior, create the desired style in the design of the apartment and the image of the house. The tool is needed simple and the composition can be purchased ready or do at home.
Put the walls in the house
I teach my friend "Botan" to put on the walls of his own home
Vadik loves to learn. He helped me when creating a foundation, the trim of the facade and mastered various ways to put lighthouses and stucked on them. Now he asked me a question, how to put the walls and ways to make it under the decor. Mastering new skills We begin on little noticeable areas. Fucked a friend studied in the garage. How to put the walls in the pantry.
We put out your own hands
Why, we need such a labor-intensive technology for putting the walls and alignment to a mirror state, he knew. Experiment from painting drywall without a solid finish has already spent.
I used to bring it metal spatulas of different sizes and rollers with a pile short and long. In addition, a friend needed a tool:
- corner spatulas;
- a container for the solution;
- Drill with a prefix for mixing;
- grater;
- rule;
- Grinding machine;
- Linear level.
Additionally for putty under the decor:
- toothed spatula;
- stencils;
- Relief rollers;
- Brushes.
The entire tool is easy and sharpened by the walls and the angles do not represent complexity. I showed a friend how to put the walls on the plaster. First, the starting lineup, then the finishing. He was already familiar with grinding.
Article on the topic: Choose doors from ash: pros and cons
Features of independent work for beginners
Finishing walls putty do it yourself
Wall putty with their own hands requires a small workout. I advise novice specialists to purchase the first skills to use the finished composition. Then you can make a dry mixture properly and confidently work with it. Besides:
- Do not strive to do quickly, the speed will come with experience.
- Learn on plaster mixtures.
- The spatula take the average width, up to 35 cm, it will be difficult for you to cope with you.
- We mix the composition with small portions, it is better to make another one. Calculate spending it in one reception, to a break in work.
- The tool should move with a slope of up to 60 degrees. To cut protrusions, the spatula blade is placed at a right angle to the wall or a rule is used. It is necessary to do this after setting the plaster putty to frozen.
- Create a decoration for decor, if you know how to put it well.
The solution should be applied to a large spatula evenly and lead along the wall smoothly, reducing the angle.
Some experts believe that putty can serve to level significant differences and even make it under beacons. On the packaging of most compounds, the maximum layer applied is 3 - 5 mm and only separate species up to 10 mm. Polymer putty are recommended to apply 0.5 mm. Therefore, I believe that you can sharpen small irregularities of the walls of gas blocks, drywall and polystyrene foam. The rest must be plastering.
Surface preparation and why do it need to do
Independently put the walls in the apartment
Before putting the walls with their own hands, they need to be prepared. Vadik Walls had new, so the old finish, peeling, noticed. There was no black fifth fungus that need to be deleted. We simply removed dust with a powerful apparatus with plaster and drywall. Perebed the fat stains and covered the walls of the primer of deep penetration into two layers.
Check the degree of irregularities, before placing the walls, did not become. Why do it, if we ourselves plastered and removed the plane to 1 mm. Now we had to actually change the roughness and cover the thin layer of putty under the paint and the decor.
Article on the topic: New Year's crafts do it yourself
If you have big deepening on the wall, then make the putty of these places first, pulling the layer on zero along the edges of the depression. Then it will be easier for you to cover the entire surface with the next layer.
Proper use of tools for high-quality alignment
Wall decoration putty
Vadik was interested in how to put the walls with his own hands, so that the minimum of transitions was formed. Experts use a professional tool. Spatula 600 mm will leave less grooves. But they need to be able to use. Friend tried to press the blade with a loose hand to the wall. As a result, Zigzagi went, and it turned out even worse.
I gave him a few tips, how to put off.
- The tool must be clean. It must be constantly washed.
- The composition is applied to the middle of a spatula in more quantity, then less squeezed at the edges.
- The smaller the solution remains on the soldier, the stronger the tool towards the wall bends.
- The remaining transitions immediately categorize.
- To create a glossy surface, you can use a conventional tool depending on the composition and reduce grinding to a minimum.
- Corners Make smooth helps a special profile.
After that, I noticed another mistake that Vadik allowed. He finished applying the composition at the next site and when she cleaned the tool, the remnants wanted to throw into the solution. This can not be done, especially if the putty on the plaster basis. Particles from contact with air formed a film and became harder than the rest of the mixture. They no longer dissolve, and the composition will not be homogeneous.
Aligning gypsum putty on the walls
Split Walls with minimal time and energy costs
Wall replacement technology provides both align using a tool for applying composition. For a mixture of plaster use a wide spatula. When the solution on the wall solidifies, the blade is placed at a right angle and is conducted on a plane, cutting the protrusions.
Article on the topic: How to paint the slopes on the windows in the apartment with your own hands?
Vadik managed to remove all the transitions of the starting putty. It turned out better at the finish line, and he was only slightly grinding her skin. I have experience and make alignment to a mirroring surface using a simple tool, more precisely spatula or rule, without grinding.
In the corners I fasten a perforated corner or a special paper tape. Then I use an angular trowel to make smooth flange of the planes. Slicing irregularities along the edge of the wall, cauting the angles finally a small rubber spatula. The putty of the walls with their own hands with the use of my methods was made by Vadik faster.
Grouting mixtures from cement eliminates grinding
How to put the walls with cement makeup my friend learned quickly. It remains to master the alignment without stripping to make the walls glossy.After applying cement putty on the walls, you need to wait a couple of hours. Then make the grater in water and the circular movement to rub the surface. Alignment is obtained sufficient for sticking panels and tiles. You can even wallpaper. The angles are processed by a flat tool. Rendering is done by corner.
Split under the decor
Independent putty wall
Putclone can serve to create decoration. Decor is done after complete alignment and grinding walls. Fresh composition is applied to the surface and the volume is attached to it in various ways.
The simplest decor is obtained using a brush. Rigid fibers leave stripes, and the hand draws everything that she wants: waves, circles, zigzags.
A roller coated with cloth is created small chaotic protrusions on raw solo. It looks original rain decor. Spatula without touching the walls obliquely rises up. The texture of the picture is superimposed by the bands. Then the surface is painted.
A spacure is applied through a special stencil. Remains are neatly removed. There is a convex pattern. You can make it possible any complexity. The decor looks unusually beautiful if it is covered with various colors using the texture.
Try, and you will get a fashionable and unique interior.