In the wardrobe of modern stylish girls is not excess. Each thing is an indicator of the individuality of its owner. For example, a handbag. Evening clutches, big bags, bright summer and homemade handbags are not just an accessory, but also the most important attribute of any exit. Now you can find any models and styles of women's bags. But if you have mastery of cutters and sewing, then you are not difficult to sew fashionable bags with your own hands. Such bags will definitely send the mood of the hostess and emphasize its individual style.
Required materials and tools:
- Lightning about 10 cm or longer than a hole for the fastener. We used old zipper cut off with trousers;
- zipper about 40 cm, you can cut off with an old bag;
- Pattern Purse: One piece made of basic fabric, one of the lining, one of the doublerin (without allowances, with a hole for the fastener);
- a piece of the main fabric 30x67.5 cm for the bag;
- Two pieces of fabric for handles 7x33 cm;
- a piece of lining - 30x67.5 cm for bag;
- A piece of lining cut over the contour of the wallet with allowances.
Assembling wallet
With the help of an iron, glue a dublerin to the invalid side of the main part, and centen so that it turns out the edging from the fabric from all sides.
Fold together the front sides of the main fabric with a double or lining. Purge along the long edges of the fastener. Stop all seams. And ensure that all lines have the same length.
Gently cut the fabric through several layers along the pink line, which is indicated in the photo.
Start carefully lining on the front side through the hole. Scroll well the edges of the hole so that it turns out to be smooth.
Put a zipper under the hole and step along the edges of the hole to fasten the zipper. Use a special foot.
Article on the topic: Crochet Beach Tunic: Master Class with Schemes and Description
Make seams in the middle line wallet through two layers of fabric. In the photo, the clamping paw was removed to be seen well seam.
Turn over the involve side to the top of the wallet. The lining layer is divided into two halves. Wrap half without zipper on half with zipper. As a result, you will get a lining pocket. Purchase near the edge to secure fabric. Pocket ready!
Now it is necessary to attach the main zipper. Turn over the wallet up face. Turn the fastener so that it can be seen from the wrong side. Starting from the middle of the wallet, sung lightning. Note that the beginning of the fastener is curved and its tape is bent for a free bend, as shown in the photo. The pink line shows the seams line. Make sure that it is not too close to the teeth. Try to sew a little dirt lightning. Then it will be easy to close and open.
Continue to sew the zipper over the perimeter of the wallet, making small incisions on the zipper so that it goes well on the rounded edges. When you get to the other end of the midline, adjust the zipper in such a way as you did in the previous steps.
After that, it is necessary to attach the other side of the zipper around the remaining edge. On the other side, we can sign symmetrically along the other side of the middle of the wallet. Success with zipper. Inscape the beginning of the zipper so that it is symmetrically relative to the middle of the wallet and both sides. The finished wallet should look like:
We collect bag
For the manufacture of handles for the bag, adjust two long edges by 6 mm on the wrong side and start. Then bend the fabric along the length in half so that the adjacent edges are leveled. Sent back again. Stop along the long sides again. Pens ready.
Place the handles on the upper edges, as shown in the photo, so that the ends of the handles performed over the top edge of the fabric by 2.5 cm. In place of the gunpit, closer to the edges of the bag.
Article on the topic: Dryer for linen with your hands from plastic pipes with photos
Bend the fabric for the bag in half so that short edges are connected to the right. Make seams on the side edge.
On the wrong side, adjust the top edge to 1cm. Schedule the iron.
Now you enjoy the wallet. Make four marks along the bottom of the bag and along the wallet circumference. Fold them together by the facial sides. Check by marks, pinch pin. Purge the edges for fixing. Purge along the edge, with the exception of one place where the tilt of lightning occurs with the middle line. In this place, leave the hole so that the lightning slider can go through it. When you finish, the bottom of the bag should look like this:
Remove the bag on the front side and carefully thread the slider through the hole.
Remove again inside out the bag and cut the allowance and excess lightning. Secure the holes that you left in order to pull the slider. Purge carefully, as close as possible to the edge around the slider.
We make lining
Repeat the previous steps to sew the side and attach the bottom of the bag. You need to make a seam around the bottom to secure it.
We collect bag
Remove the bag on the front side. And do not turn the lining. Insert it inside the bags, but do not forget that it is necessary to align oval bases. Align the adjacent edges of both layers and go close to the edge to bore them together. Then take another seam by 2.5 cm below the first throughout the perimeter. This seam will fix the ends of the handle handles. Well, fashionable bags are ready for your own hands.
