In the modern world, each person has a smartphone or at least a mobile phone. But now we will talk about the first. As you know, every year a huge number of companies produce phones. They increase the display, make it without frames, thereby increasing the chances of breaking our smartphone. The most reliable way that the phone can protect is, of course, the cover. This is what we will talk about this in our article, namely how to weave from the rubber case for the phone. Such an accessory will allocate you from the crowd, allow you to make the phone bright and original.
Weaving on the machine
The process of weaving covers for beginners will take a lot more time than making bracelets. But the result will force himself. Of course, you will need more material, and we will weave on 24 pins.
For some schemes, two or more machines are used, which are fastened with each other. But in our article we will use simple schemes of weaving, which are made specifically for beginners.
It is worth practicing on simpler diagrams, for example, on weaving bracelets. If you are confident in your abilities, you begin.
On the machine we will weave the cover with you on the most-selling model - on iPhone, take the fifth model. To do this, prepare your machine: position it in such a way that the line is missing in the middle, and the columns of a row, which is closer to the open side to the right, and the distant row.
We are wearing the beginning of the cover: we throw our iris on the second column, which is closer, and the third, which further wrapped in the eight. The second wear exactly the opposite. As a result, the gum crossed the diagonally. We put on three more such crosses, and then to make a hole for charging, let's miss two columns. We continue to wear four more such diagonals.
Article on the topic: Carpet with your own hands: How to tie from pumps and from flaps with photos
On the second layer we throw the gum for a couple of opposite columns. And then we ride a row along the length of the row.
So we throw through the entire perimeter of the product.
On each pin we throw off the gum of the first color from the outside to the center. We repeat throw the subsequent layer, as before that.
Next, remove all the rubber bands of another color to the center. And we put on another row.
The lowest gum removes the middle and make another row, having traveled and throwing the iris.
Now we will make free space for the screen: on the third pin on the right side we will throw the lower elastic over the next fourth column. Similarly, repeat until you finish up to the third nozzle on the left side. Starting from the fourth pin, we throw off on 4 columns of gum into the center.
We put new gum, only on busy columns. We throw off the lower gum of the first color. According to such a scheme, weave 16 layers. But during 15 rows we put the gum and empty pins.
We make a place for the camera, having driven the following row and skipping the place. Rubber bands are removed throughout the machine.
Then we ride another row, putting the gum on all columns.
Again, we caught the gum diagonal. We will remove the bottom row and close our work.
Look at this video to get even more useful information and, perhaps, something else to understand.
Cover without machine
You can also apply our cute cover without a machine. Take, wrapped two times the rubber band on the hook. Jump one more, stretching through the previous one. According to such a chronology, we have a certain chain of 16 rainbows. Do you have a wide phone? Then it is worth it to try this detail if it is not enough, then reach the length of the length.
In our case, get the hook in the eighth ears. Remaining while remove. Get our tool to the third rubber band and thread through it another iris. The hook turned four loops. We stretch another elastic band, we descend all that on the hook, and put the second loop on the hook. Peel two more columns using a third loop.
Article on the topic: how to decorate a collar shirt
Slip one elastic. Pour three columns through the loop. Continue work by turning our case. We start the hook into the top layer and throw on one elastic band, not missing a single loop. After we have tied the foundation, we will penetrate an additional gum in the leftmost loop. Get the hook to the next loop and make a gum through it. Threaten another rinet through 4 loops. Weave the product to the required length.
Connect its ends, reaching the last layer. Four hinges remain on the hook through which the gum must be proper. Tighten the nodule, and work is ready. Check out the video where experienced craftswomen are already talking and showing how to weave the cover on the hook.
Another inventory
Case for the phone from rubber on the fingers - the task is no longer possible, unfortunately. You will not be able to do without a hook, but if you have a good fantasy or you like to experiment, then try to make such a cover on your fingers. You will become a celebrity, because anyone has not yet managed to create such a miracle. It is hard to find weaving the cover from multi-colored rubber bands on slingshot. Unfortunately, two columns are missing to weigh the bulk products. Therefore, if you do not have a machine, then try to evolve this desired accessory on the hook.
Weaving schemes There are many. The most common are "pigtails". The rubberries are tightly attached to each other, and if you use different colors or make a transition, then your phone will be the brightest and original in the circle of friends. You can print or draw these schemes yourself on the leaves.
