Handmade clothing is highly valued due to exclusivity and originality of the model. Women's jumper with knitting needles will not only make a novelty in the wardrobe of every fashionista, but also create its own unique image. The most tender and feminine jumper models are made by their mohair. The mohair is natural wool of mountain goats, which has incredible ease, and at the same time it turns out very warm and cozy things. In detail how to tie the jumper from Mochhar, and that this will be needed, presented in the description below.
We work with fine yarn
For the manufacture of the jumper, the size of S / M take the yarn with a mohair content of at least 80% in the amount of 150 g and the knitting needles 5 and 6 mm.
The jumper is made face with a rubber one on one on the bottom of the product and sleeves. Schemes of these simple patterns, if necessary, are given.
Knit density 10 per 10 cm facial stroy is 9 loops in 12 rows. Consider in detail knitted jumper for women with schemes.
Soft back
Take the needles of 6 mm thick for operation, knit 6 cm with a rubber band on 60 loops. Change the needles on the thickness of 5mm, knit facechair, in the first row evenly reduce the number of hinges to 48. To penetrate the web with a length of 60cm and perform the escalation of the sides of the sleeves, having reduced the first reception of 2 loops after two and two recently loops of the row. In each second row, the detail of the accumulation of 1 loop. Strike knit cloth at a distance of 76 cm from the first row.
Detail of transfer and sleeves
Perform, as a back, only at a height of 64 cm. Run the closure of 16 medium loops for the future of the neckline. Both parts finish separately, performing the accurate in each second row of once 2 loops and twice 1 loops from the cutout side.
Article on the topic: Bulgarian Cross Spokes: detailed schemes with video
For the gum take loops with a thickness of 5 mm and tie 6 cm on the 31st loop. After continuing the work of the facial stroy on the spokes of 6 mm thick. Sleeveless sites do at an altitude of 16 cm by performing four additions from two sides in every 12th row after the first first and in front of the two latter loops of the row. By sticking a cloth with a length of 54 cm, it is necessary to accumulate for the OKAT's line of the sleeves of one and three loops three times over a row after the first first and in front of the last two loops. Last row close.
Repeat execution for the second sleeve.
The neck to arrange a bar, typing 63 loops in a cut and sticking 4 rows with a rubber band. Use the needles with a thickness of 5 mm and pre-connect one shoulder with a pig. Sew the second shoulder and slices of the plank. Perform side and seams of sleeves. Insert the sleeves in the armor.
Summer cotton
Openwork jumper will be elegantly looking at the skirt over the top and beautiful bra.
Size range: S-L-XL.
For knitting summer jumper, you will need 100% cotton yarn - 450-500-550 g, knitting needles for a circular knitting with a diameter of 5 mm, a hook with a dimmeter of 4 mm.
Although the needles of circular needles are used to work, it is necessary to make knitting cannon in one line directly and back. Knit a thread of two additions with a rubber band one on one and an openwork pattern according to the scheme on which the facial and invalid rows are represented. For the pattern rapport, the required number of loops 8 plus 3 plus 2 edge loops. The first time the pattern to tie up to the 18th row, to repeat only from the 7th row. In the Rapport, the number of loops will become more, due to this, the calculation is carried out in the number of rapports, and not loops. Start and finish knit from rapport.
The lace for the design of the throat lines fit in the first row of alternating 1 of the irrigation loop, 1 removed, while the thread remains before work, finish the invalid. In the second row, the involve loop is removed, leaving the thread at work, one facial, finish the wrong dropped loop. The knitting density of the openwork pattern of 7 cm in size for a 10 cm is 14 rows in 1 closed rapport.
Article on the topic: Panel from threads and nails do it yourself: schemes with photos and video
Details of the back and transfer
Slit 5 cm with a rubber band, typing loops in the amount of 61-69-77 loops. For openwork pattern, run 6-7-8 rapports and 0.5 reports at the beginning and end of the row. After 42 rows, expand the cloth by another 0.5 report on the left and right side, increasing by one loop at the beginning and end of each fifth row.
After graduating from the additions in 47 rows, to type 33 additional loops on the other side and another thread on the other. This is the basis for future intrinsic sleeves. Include new loops in the current 12th row of the pattern, repeating 14-15-16 rapports. We stick 48-54-60 rows, divide the cloth into two parts. Every part knit separately, performing 7-7.5-8 rapports, and the middle loop perform the edge. Finish the sleeve with knitting strip 9 cm high, fulfilling the last two rows of the cord.
It is one shoulder to connect with a stitch one shoulder and tie the neckline, gaining 31-39-47 loops. Sew the side and seams of sleeves. To prevent stretching the neck Screw the chain of air loops, stretch it on the back, fixing the ends on the shoulder seams.
Jumper for daughter
Below is the model of a stylish jamper for a girl, made in a two-color strip, the bottom of the jamper and sleeves adorns the transverse strip from the braid.
For knitting used yarn with woolen fiber content of no more than 30% in the amount of 200 g pink and 300g beige, the knitting needles with a diameter of 5 mm, the knitting needles for circular knitting with a diameter of 3.5 mm.
The canvas consists of face glades in the execution of facial rows facial and involves with hinges. At the bottom of the sleeves, the edge of the product and the neck - a gum with an alternation of facial and invalid loops. Colored strips change every 4 rows.
The bottom plank with a pattern of braid is performed on 18 loops. In the first row, it is sequentially 3 facial, 3 irons, 6 facial, again 3 irons and 3 facial. Pouring rows as a loop lie. Repeat from the first row, in the ninth row after the facial and invalous loops of the 6 next to connect the braid, leaving 3 loops on the auxiliary needle at work, 3 facial hinges from the auxiliary needles and finish in the drawing. Repeat again in the first row. The knitting density of a square 10 cm by 10 cm is 23 rows of 19 loops.
Article on the topic: Applique "Butterfly" from leaves: stencils and patterns with photos and video
Details of the transfer, backs and sleeves
Tie 120 rows of the lower plank with a scythe on the spokes with a diameter of 5mm beige threads. On the long side of the manufactured strip, dial 120 loops to the knitted 3.5mm diameter and knit facechair, alternating colored rows. At an altitude of 25 cm, divide the cloth on the front and back. On the front, close the first loops for the future arm of the sleeve, knit the next 54 loops and turn the 6 loops again and go to the back, tie the same number of loops and finish 3 closed loops for the army. Knit the detail of the back 40cm. Go to knitting and after 32 cm from the plank, close 10 medium loops and finish each side separately, closing from the inner sides in each second row of a seventy one loop. As the back, finish 40 cm.
Tie a bar with a pattern from braid, while having 40cm. Start knitting the sleeve from the long side of the strip, dial 40 loops on the knitting needles with a diameter of 3.5 cm and knit facechair, alternating colored rows. From the sixth row to make fivefold additions of one loop on each side, getting a pipe of OKAT. Slit 28 cm and start closing the loops symmetrically from the sides in each second row nine times two loops. Knitting finish after 46 cm from the plank. By analogy to tie the second sleeve.
Video on the topic
This article presents a selection of video on the topic of knitting female jamper with knitting needles.