Atlant - a manufacturer of household appliances that ranked first seats on sales in the CIS countries. Indeed, it is impossible not to note the Belarusian quality, the complexness of the assembly and some possibilities. For example, most refrigerator models can withdraw the doors. It is very convenient because you can make the use of the device more convenient in specific conditions. And since the outlet of the door on the refrigerator is not too difficult at the refrigerator, you can perform the operation and your own hands.
Scheme
Views of the refrigerator
Before removing the door from the Atlant Refrigerator, it is important to determine how much doors don't have to shoot. Atlant produces refrigerators:
- 1st camera;
- 2;
- 3rd.
The second and third options suggest the advantage of two or three external doors, while the first option involves the advantage not only the external, but also the inner door of the freezer. Therefore, we consider more detailed operations in the photo and video, how to rearrange the door on the Atlant refrigerator in different versions. I describe the first: with one chamber and freezer door.
It should be noted that, despite the small dimensions, such installations are quite popular on dachas or as a second refrigerator. All this is due to good power, small dimensions and capacity.
Actions
So, we outweigh the doors of the Atlant refrigerator. Let's start with the external, after moving to the inner. To begin with, it is necessary to look into the instruction manual. It indicates the ability to outweigh the door.
Attention! If the refrigerator is under warranty, the outweight door is better not to do. Otherwise, the warranty period is terminated. Therefore, if the refrigerator is new, and the position of the doors does not suit and this can be corrected, of course, it is worth seeking help from specialists. The wizard of the service center will come, change the doors, and in the warranty coupon will make the appropriate entry. And the guarantee will act on a given period.
Instruments
If still, the outweight of the doors will be carried out with their own hands, the refrigerator has long been warranty for a long time, then we start with the necessary foul inventory:
- Several screwdrivers of different formats and size.
- Wrench.
- Hexagon.
- Passatia.
- The loop for the freezer door (this item is not included in the kit, and different loops are used for different sides). You can buy in the service center or spare parts markets.
Article on the topic: How to independently make a half-year of plasterboard?
After the place and tool for work are ready, you can start execution.
Instruction
So, we describe in more detail each step, including the nuances, how to rearrange the cooler compactor Atlant:
- Turn off the device from the network. Safety recommendations were never unnecessary.
- On the top of the opening, the screws that should be unscrewed are noticeable. They constrain the top of the cover. After that, it is easily removed.
- On the right side of the door is located canopy. It must be rearranged on the left side. In order to start unscrewing fastenings on it, the door of the refrigerator must be closed tight. The canopy on top looks like a plate with a door screwed there.
- By unscrewing the canopy, it is necessary to rearrange it in the opposite direction. At the same time also insert the axis in the plate.
- Next you need to open the door, then carefully remove it from the bottom canopy. The fact is to strongly open the doors or start pulling it, you can easily damage the sleeve of the lower canopy. Then the task will complicate significantly.
- The top of the canopy is equipped with a special plug, from the other side with which there is no door. This element is neatly removed by a screwdriver, after which it is rearranged on the opposite direction.
- After the doors are removed, it is necessary to rearrange the handle in the opposite direction if the model has a mounted handle. When the handle is rearranged, you can go to the lower canopies of the doors.
- Using the hexagon, the bottom plank of the refrigerator is unscrewed, followed by a fitting for doors.
- Using a wrench, a nut, fastening the axis, is unscrewed. It is removed and twisted on the other side.
- After the door is put on the bottom axis, it is fixed and closed. The magnetic seal will hold it until complete consolidation. Attention! It is very important not to drag the bolts. Therefore it is worth calculating twisting.
- The next step is to rearrange the door in the freezer. By the way, the door seal for the refrigerator Atlant is removed, in case of permutation. The same happens with the door on the freezer.
- To starred the door itself, it is necessary to lift a little and pull the semiring, which is a stopper. Next, the door is simply raised and pulls out.
- On the opposite side of the device, screw the latch retainer. The sleeve of the upper axis must be pulled out and install on the desired side.
- A canopy for the door will need to buy in accordance with the side where the canvas will be rearranged. All because this item is manufactured and installed exclusively under a certain side. When rearranging the door turns.
- After installing the door is replaced again with a plastic semiring.
Article on the topic: Gardins do it yourself: Step-by-step instructions (PHOTO)
Once all works are made, the refrigerator can be wiped and turned on. It is very important to double-check how tightly the door of the freezer and the refrigerator is closed. If the freezer can not be tightly covered, shortly after work it will be impossible to close due to the assembled at the edges of the ice. And with a violation of the tightness of the camera, the storage conditions of products will violate. The same applies to the refrigerator. It is designed for a certain temperature. If the doors are easy to fit, condensate will be assembled inside the chamber, due to the temperature conflict, problems may arise with the operation of the entire cooling system.