In this article, we will talk about how to build a wire at home. As a rule, many people are sooner or later faced with such a problem. No one knows how to fix it, I decided to remove all the questions, make a detailed description for you. And tell about all situations and ways to exit them.
How to build a wire: basic ways
Here we will talk about the easiest increase in wires, when there is full access to the wire and veins from conductors from the same metal. Such methods are suitable for both copper and aluminum wires.- WAGO terminal blocks. They can be used even in cases where metal does not coincide. Build the wires using them very simple. For clarity, I will show you an image, it will definitely be clear.
- Connecting blocks for wiring - this is the most budget option.
- Twisting lived among themselves. This method cannot be called safe, but if you do everything right - such an elongation will serve you all my life. But, remember, it is necessary to make a clench.
- Soldering is the optimal and best option. But it will only suit electricians with experience. In this way, it is possible to increasing even the wires with a cross section of 4 to 6 mm.
Remember, build copper wire with aluminum, you can only using a special terminal.
Read and classify wires, not everything can be increased.
Article on the topic: Specifications of species of blinds
And so, here we dismantled with the basic ways. Browse the video, so you will be more clear.
Now let's talk about situations that may arise. Standard methods are good, but you need to be able to leave any position. That's about all situations, I will tell you.
Wire extensions: household situations
Broke live in the wall
If this happened, you must decide whether the wires are enough to connect everything. If enough, we use any way you could see earlier. If it broke so much that you should not bring out, you must smash the wall, and there you can already carry out all actions.How to build a cable in water
Such a situation arises in cases where it is necessary to lengthen the cable site overlooking in water, for example: the wire for the immersion pump is increasing. Here you need a shrink tube. We do everything just as shown in the picture. For cable under the ground, this method is suitable.
Remember, it is possible to warm up and a lighter, but look, the tube must take a tight on the wire.
How to lengthen wire or cable for powerful electrical appliances
In this case, only some option is suitable - soldering. Don't even look at others - it will only bring trouble. Powerful electrical appliances can be attributed: air conditioning, electric stove, etc. The conductor cross section should be (4mm).How to build a cable or low power cord
For example, if you decide to build a cord for the microwave, a washing machine - throw it away with the idea of my head. After all, if you do not connect it, there will be big problems. And you can connect to an error grounding with a phase. It is easier in this case to stretch the wire under the plinth, and safer.
Increase the thermal sensor wire length for a warm floor
Initially, read the instructions for it if there are no problems - use terminal blocks.Article on the topic: Installing lattices on windows with your own hands (video and photos)
How to grow twisted couple
In this case, there are no problems, but remember, increase each lodge separately. Do not forget to carefully isolate the place of increment * I am wires.
How to build a LED tape wire
To do this, you need to purchase special connectors, they allow you to gradually increase the wire for LED lamps. Other ways and materials in this case are not suitable for you.How to build a wire: video
Interesting article: ABS cable description.