The variety of modern finishing materials allows you to issue an interior of an apartment or house absolutely in any style. If the wall is desired, you can paint or make an unusual design with the use of textured plaster. But such methods require a certain experience of work, the cost of materials is high enough, which makes them available far from all situations. The most acceptable such finishing material as wallpaper. It can imitate almost any surface. The canvas are not only beautiful, but also able to give the room a certain style and sophistication. They are often decorated not only the walls, but also the ceilings.
Technologies for decorating wallpaper angles.
Pocking is extremely simple, there is no special experience. But newbies often arises the question of how to glue the wallpaper in the corners, so that the surface remains high quality, there are no windows and air bubbles. Blooming the wallpaper in the corners is not so difficult, but there are a number of rules that you have to follow. Internal and external angles are in different ways, but if you comply with all the requirements, the work will be easy, and the result is awesome.
Features of sticking in the corners
From tools and materials for sticking must be prepared:
Wallpaper sticking circuit in corners.
- Wallpaper in a calculated quantity;
- Special wallpaper glue;
- rollers;
- knife;
- simple pencil, metal ruler;
- If necessary, it is necessary to prepare a putty, metal spatula, metal galvanized corners;
- To remove glue from the joints, it is enough to buy a clean cloth.
How to glue the wallpaper in the corners of the room? The processing of external and internal angles is slightly different, but no special skill is required for this. Before work, you must apply markup. If you want to punish the canvas in the inner corners, then the material must be applied so that it turns into the next wall for about 5 cm. The problem, how to stick the wallpaper in the corner is quite simply solved. It is impossible to allow a large or smaller point of rotation, as it affects the quality of sticking. If the allowance is too big, the coating will be frowning, and this will require transverse cuts to remove all excess, release air from the bubbles formed. But with too small allowance, the probability of dugout after the glue dries, increases many times.
Article on the topic: Paper blinds: Unique design with your own hands
Circuit circuit with wallpapers of external corners.
How to glue wallpaper in corners inside? The surface of the wall is thoroughly labeled with glue, if the wallpaper requires, then the canvas must be smeared with glue as well. After gluing, you can take a metal ruler, attached to the place of the joints of the two bands. A sharp knife is cut, after which trimming is carefully removed. The remaining upper edge should be neatly wrapped with glue, attached tight to the wall, excess glue immediately remove.
How to Choke Wallpaper on Outdoor Corners: Instruction
Everything is not as difficult as it may seem, but it is precisely this angle that should be perfect. If there are chippers, irregularities on the surface, they need to sharpen them, after which it is used to use a metal corner to check the accuracy of the work. The angle should turn out perfectly smooth.During the blending of the wallpaper, the material must be carefully started to 5 cm per angle, sticking it to the mustache. After that, with the use of the metal line, an incision is performed at the place of the joint.
In no case cannot shift the ruler, as the incision will be uneven, and this will lead to the fact that the canvas will have to be removed and proceeded again.
To shove wallpaper on the walls, it turned out faster, it is necessary to put the markup to the surface with a simple pencil.
This will allow in the future no longer worried about the quality of work.
Fliseline wallpapers in the corners and not only
Flizelin wallpaper gluing scheme.
Solving how to punish the wallpaper, many prefer fliesline coatings that are made on the basis of natural cellulose and fibers. This material is not only durable, but also beautiful, the process of sticking is characterized by simplicity. Such coatings can be labeled even on the wall with small irregularities, as they mask them. Usually, such material is used under painting, i.e. After the pasting of the entire room, the phlizelin wallpaper is painted the paint of the required shade.
Article on the topic: New Year's gifts do it yourself by 2019: 20 simple and cozy ideas (35 photos)
Powing does not require complicated preparatory work, it suffices to clean the surface from dust and old coating if it is. In addition, a large density allows you to avoid shrinkage, which is very important for obtaining a beautiful and neat wall covering. If necessary, flieslinic canvases from the wall it is easy to remove if the need for a change in the decor has arisen.
The process, how to beat the wallpaper from phlizelin, is quite simple, although a little different from how working with other types of bulk coatings is performed. The glue is applied to the surface of the prepared wall, after which the canvas are tightly glued. It is usually not applied to the wallpaper, but if there is such a need, it should be carefully dryed with a wall, but only after that it is already starting finishing work. During the sticking, the speaking surplus of glue must be removed from the joints immediately with a dry cloth. If this is not done, then after drying, the paint does not apply in these places, the defects will be very noticeable.
Required tools for sticking fliselin wallpaper.
Bloom the wallpaper from phlizelin in the corners can be exactly the same as the usual. During operation, it is necessary to consider such parameters:
- The wallpaper glue is selected only for flieslin wallpaper.
- If strong irregularities are observed, which is usually most expressed precisely in the corners of the room, it is best to immediately use relief coverage. For smooth wallpaper, careful alignment of the walls is necessary, otherwise the surface will be ugly.
- If the angle is distinguished by strong irregularities, it is recommended to use putty and metal perforated corners with galvania so that the rusty spots are not fascinated on the surface.
Otherwise, the process, how to punish the wallpaper in the corners of Flizelin, is no different from the conditions already given.
Wallpapers are one of the most common finishing materials. The blending process is simple, but requires compliance with certain rules. Particular attention should be paid to how to stick the material in the corners of the room. Otherwise, the bubbles and irregularities will be observed, the canvas itself will cover with air bubbles.
Article on the topic: Bordeur for paper wallpaper