Summer souls is one of the important buildings in the country areas. It helps to be refreshing and put itself in order after a long working day under the scorching sun, so each dachnik should think about how to build a summer shower with their own hands on its own site. This is not the most difficult idea, which is fully fulfilled by everyone. But to bring the construction to the end and get the expected result, you will have to work hard as mentally and physically. The construction of a summer soul does not imply comply with special safety regulations, you do not have to draw complex drawings or resort to expensive plans of special agencies, everything can be done with your own hands, the main thing is to calculate your strength correctly.
In a hot summer time, being in the country or in a country house, it is nice to have your own flight shower. After the actively conducted labor of the day, I want to take a shower to refresh yourself and rinse under the shower jets.
Film summer shower
Each dacket builds on the territory of his site of one or another shower or shower cabin, corresponding to its requirements and fit into a certain budget. It can be structures of various types from the most simple and inexpensive film shower with water supply from the hose to the capital construction, which is considered a separate building on your site and can bring a lot of benefit. That is why, you should consider all possible options so that you can choose the summer soul, to build with your own hands that can be with minimal material costs.
Summer Soul Plan Scheme: consisting of two separations of the locker room and the soul.
The easiest and most cheap option that can be considered a disposable or shower for one season is film. It is convenient because it can be moved over the site, constantly picking up for the shower the most convenient place. For the construction of such a design, it is not necessary to develop drawings and schemes, but this building is not independent, therefore it is not reliable and high-quality. The film shower consists of an angular two-sided frame having a type of screen or from a metal rectangular frame. Such a frame can be folded and lay out at any time, so it can be put on the veranda or in the barn. Perhaps this is the only advantage of such a design. Therefore, such a device can be applied temporarily before you do not build a capital structure.
Article on the topic: how to make the threshold of the entrance door in the apartment on your own
Film shower can be installed with their own hands at any convenient location. It has a look of a frame, covered with a film or polyester curtain. In the upper part of the structure, a tank with water is installed or a watering hose with a shower nozzle is injected. At the bottom of the shower has a conventional wooden lattice for the legs, the simplest removal or water flow, which, however, may not be. Such a shower can be considered not even summer, but temporary. They can be used while the construction or repair of cottages is underway.
Frame capital shower for giving
Scheme of the constructions of the summer soul.
This species represents a more interesting design that you can serve not one year. It has a number of advantages, among which is the integrity of the design, good stability, high quality assembly and materials, quick water heating, good ventilation. The negative side of such a building is that it seems to be something mean between capital shower and portable. It is impossible to make a barn or storage room, while on the street he will quickly come to an unsuitable state in winter.
Capital frame shower is the simplest metal rectangular or square design installed on the foundation, concrete slab or bricks. The frame is attached to the foundation, after which it can be covered with any material - wood, chipboard, plexiglass, plastic panels, metal sheets, polycarbonate, etc. Material is attached to the design skeleton with bolts and nuts or screws. After that, the summer souls are equipped with a tank for water, a door or a curtain, a flow for water, a footrest and other accessories. Such a souls with proper care can serve you for several years.
Any summer shower must be inspected at the beginning of the season, replace some details and soak anti-grapple compositions.
Capital dacha souls
Summer Soul Device Scheme with Water Heating Column: a) Plan, B) General view. 1) bench. 2) Shower pallet. 3) curtain.
The construction of such a soul will be somewhat more complicated and more expensive, but it will be better and more durable than previous ones. Before building it, you need to decide in advance with the place. It is necessary to build it on a flat platform, preferably in half. Not far from the shower should be a place to drain the water, otherwise you will have to lay the sewage. A shower cabin should not be on a well-worn place, it is best to build it at home.
Article on the topic: Ventilated facade - characteristics, properties, types and schemes of the device
In order to build a capital summer shower, the following materials will be needed:
- Brick, preferably silicate, not requiring further finish;
- cement;
- sand;
- crushed stone or brick battle required for building screed and foundation;
- Materials for roof and overlap. Here the choice of material depends on your requirements, because for the construction of floors from fittings and concrete or from the bar, completely different materials will be required;
- mounting foam;
- paints and varnishes;
- plaster;
- Waterproofing materials.
Separately, it is worth talking about the shower tank. A classic version with a regular barrel here is not suitable here, since there will be no speech about any capacity here. However, if you want to save or install the tank for the first time, there will be no problems. The plastic tank is best for these purposes, for example, 200-300 liters of water, which can be purchased at any construction store. It is advisable to choose a flat wide container, secure which much easier. The weight of the tank in this case will be evenly distributed on the roof.
In the same construction stores you can also buy special kits for the country soul - tube, watering can and crane. They will need to be installed in the tank through the overlaps. If it is impossible, you can build a course of water from the tank with your own hands using a pipe, crane, watering can and special fittings for setting a set in the tank. However, good spraying of water in the summer soul should not be expected due to the lack of necessary pressure.
Another important element of the summer soul is a pipe for removal. It is necessary to calculate the distance to the place to the place where the water will be merged. If the water goes to the garden or in the garden, you need a few meters of pipes, if further, for example, in a ravine or a cesspool, you will need a larger amount of pipe. In addition, the summer soul device involves the presence of a window, the door to enter.
Summer soul diagram from profile pipe.
For the construction of the walls of the summer soul, make marking, not forgetting to schedule the location of the door. Then using materials for masonry, plumb, level and other tools, you can begin building walls. For the strength and reliability of the design, there is enough masonry in the Pollipich. When the walls are erected, it is necessary to leave the holes for ventilation and the window, as well as at the desired height, climb the blocks of overlaps. Overlapping for the summer soul is simple, without fill between reinforced concrete and lifting the roof. Therefore, the bars are placed in a layer of waterproofing and slate with a hole to summarize water. Slate is nailed by overlapping using special nails under a slight bias for draining the rain and melting snow.
Article on the topic: How to choose the right paint for wallpaper
Install the tank on the roof with your own hands is easy. This does not require special attachments, enough clamps or subdellands and crushing. After that, the tank is connected to the water supply tube through a predetermined hole in the tank and the tap. The inner finish is starting with waterproofing, which it is necessary to strip the lower parts of the walls, the locations of the walls and the floor to prevent the impact of moisture on the foundation. To do this, use bitumen, coating, special hot compositions, etc.
Scheme of species of summer showerful devices: a) float. B) pedal. C) solar heater.
After installing the waterproofing, proceed to the pouring of the screed. Make it under the tilt so that the water is not delayed in the shower. Next, windows and doors are installed on the usual scheme - installation of the box, strut, seal by mounting foam and the installation of slopes. After the main works are completed, you can move to the finishing itself. If each dachnik has the ability to use those materials that will fall to taste. It is only necessary to notice that it is necessary to use moisture-resistant materials, the most popular plastic is considered. If you choose this particular material, you need to handle the walls with anti-grab composition, make a lattice from a wooden rail, treated with olphoua or varnish and install plastic panels. For interior decorations, plaster, paint, ceramic tiles can be used.
External finish Many dackets give a little importance, especially if the brickwork is beautiful and carefully, but if you wish the wall, you can fly or fade. Conduct lighting in summer shower optionally, you can restrict ourselves to the installation of LED lamps. Ventilation in the presence of the window is also optional. As for other decor elements, you can install a mirror, hooks for clothes and a shelf for bath accessories.